I rewired my using relay etc all hard wired in with solder joints, using a separate circuit for left and right light. This way if one fails I still have light. also left the OEM wiring untouched so if all else fails I can re-plug it to the bulbs.
AND if that fails I have made a lead which plugs into my power outlet socket with a H4 bulb connector on.
AND .....I now own a small gas soldering iron!
I am not getting caught without light again in a hurry, A torch duct-taped to the forks is not that much fun!
__________________
Regards Tim
Learning my craft for the big stuff, it won't be long now and it's not that far anyway
|