Tubeless Puncture Repair
Yes have used the repair kit for tubeless tyres,quite easy to use,instructions come with the kits but a quick explanation....
Use the bung insertion tool to enlarge the puncture hole (so it can take the bung) stretch the bung on to the insertion tool(think thick rubber arrow) this narrows it so you can fit it into the puncture hole,apply adhesive to the hole & push bung in,push top of bung off the hook on the insertion tool & remove the tool,leave for 10 minutes for adhesive to set then trim the bung so flush with tyre,best the leave another half hour so the adhesive can cure properly.
Supposed to keep speed down to about 40mph with bung in & get a proper vulcanised repair as soon as possible but in reality they are pretty tough & can take higher speeds.
Hope this helps,
Andy
__________________
Andy L
From the midnight sun to the silk & rhubarb roads, 2014 
I am not an adventure rider, just a biker that has adventures.
|