Thanks for the reply, these are all valed pionts.
The problem was first a needle nozzle to large at 2.68 and then I replaced them with old 2.64's which were worn. After replacing them with new 2.64's sudenly she was going like a rocket.
If you feel you loose a bit of power around 110km/h this should be the first thing to check after cheking the other more obviouse things you guys refered to in this forum.
Needle nozzles tend to wear causing an over rich mixture the moment the taper on the main needle start to emerge from the needle nozzle or needle jet.
This will hapen at almost exacly 4000rpm or 110km/h if in 5th gear.
|