'89 XT600Z Teneré Shift shaft

**rd400f** · #1 16 Feb 2007

The splines on my shift shaft are badly worn.
Is the shaft easy to replace?
Are there any other options?
Welding is not an option!

**aukeboss** · #2 16 Feb 2007

You'll have to take the bottom end, and also the bottom end apart.
So, don't.

Several fixes are possible; one is to saw through some more the split in the clamp, second is to put some stuff between shift shaft and lever.

Auke

**bolla** · #3 16 Feb 2007

I had worn splines on a kickstart shaft and was told to wrap some silver foil on the shaft then put kickstart on.
Not sure if it works but worth a go.