Go Back   Horizons Unlimited - The HUBB > Technical, Bike forums > Honda Tech
Honda Tech Honda Tech Forum - For Questions specific and of interest to Honda riders only.
Photo by George Guille, It's going to be a long 300km... Bolivian Amazon

I haven't been everywhere...
but it's on my list!


Photo by George Guille
It's going to be a long 300km...
Bolivian Amazon



Like Tree3Likes

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 27 Nov 2005
Contributing Member
HUBB regular
 
Join Date: Jan 2004
Location: Birmingham
Posts: 59
Electric Start XR600R

I notice that Pob has fitted (and Wright aspires to fit) a kick start to their XR650L's. Do you guys know whether it would be possible to fit the electric start gear (from a Dommie or an L) to an XR600? I know it sounds wierd, but I'm in a situation where my right knee is not long for this world, and, I've spent lots of money and time overland prepping my XR600.

I'm tempted to buy a new L, and swap over the bits from my R before selling it. But, with CROW and all I don't think I'd get much in the UK for a 5000-odd mile XR6.

Any thoughts?
Reply With Quote
  #2  
Old 28 Nov 2005
BCK_973's Avatar
Registered Users
Veteran HUBBer
 
Join Date: Mar 2005
Location: Buenos Aires,City of good sex,mate and asado!
Posts: 539
One way or the other it will cost you some money.I would recomend you to buy a 94-2000 L for the best money you can get for your 600.
Do you have a biger tank allready?
Saludos
KH
__________________
http://vientoderipio.blogspot.com/
America is a nice continent,not a country.All people who lives in this continent are americans.Discover it in peace!
Reply With Quote
  #3  
Old 29 Nov 2005
Registered Users
Veteran HUBBer
 
Join Date: May 2002
Location: London, UK
Posts: 635
I'm not at all sure you'll get away with it. fitting the kick to the L requires old parts and machining current parts (eg clutch cover) to look like old parts. this is OK cos honda didn't completely delete the feature from the L. I don't suppose, however, that they put a provision for the starter motor on the crank case of the 600 when they designed it in the '80s. check the manual/parts before getting too excited at the prospect!
Reply With Quote
  #4  
Old 18 Dec 2005
Contributing Member
HUBB regular
 
Join Date: Jan 2004
Location: Birmingham
Posts: 59
Hi Guys,

You are both probably right. Another tack might be to look around for a crash-damaged, but newish Dominator. Take the engine plus a few other bits from this, add my XR kick-start and bolt it in. I then get an L of sorts albeit by a roundabout route.

Oh, and yes KH, I got the mother of all tanks at last, should take delivery in the new year. See my post over in that thread.

Nadoleg Llawen
Reply With Quote
  #5  
Old 19 Dec 2005
Registered Users
Veteran HUBBer
 
Join Date: May 2002
Location: London, UK
Posts: 635
the dommie only had kickstart in 1989 over here. I think it was the J model. ie you'd need an old one, not a new one for the kickstart unless you fancy splitting the crankcases to swap the shaft. not a huge job and quite fun ... ;-)
Reply With Quote
  #6  
Old 19 Dec 2005
Contributing Member
HUBB regular
 
Join Date: Jan 2004
Location: Birmingham
Posts: 59
Hi Rich, it was my plan to use a newer motor and split the crankcases. I never realised early Dommies had a kick-start in fact. I might look around for one of those new FMX? engines - the supermoto. They are black anodised and look pretty good.
Reply With Quote
  #7  
Old 20 Dec 2005
Contributing Member
Veteran HUBBer
 
Join Date: Jun 2005
Location: cardigan,wales
Posts: 249
An easier way is to transplant the whole motor from a XL600 model code PD04 into the XR frame.There are red engines(usually fitted to the LMF model,591cc) and black engines(some LMF's and other XL's,both 591 and 589cc).Of the two the red ones had the best starter arrangement,but either will do the trick.That is assuming you want to keep it 600cc,otherwise the aforementioned NX650 Domminator motor is more refined.All will fit straight in mounting wise,but you'll need the appropriate engine's CDI and carb stuff too.The 591cc motor is more long-legged and grunty,whereas the 589cc will rev a bit better and is probably more suitable for your XR.

------------------
Just going for a short ride on my bike....
__________________
Just going for a short ride on my bike....
Reply With Quote
  #8  
Old 6 Feb 2006
Registered Users
New on the HUBB
 
Join Date: Feb 2006
Location: Melbourne Victoria Australia
Posts: 14
Hi there

I have a XR600 with a HRC motor.

Currently I am fitting the e start off the XR650L.

I confirmed the other night that all parts bolt on. The 650L cases and clutch mechanism are straight bolt ons.

see photos of mock up.

http://i26.photobucket.com/albums/c1...2/136_3635.jpg

http://i26.photobucket.com/albums/c1...2/136_3634.jpg
Reply With Quote
  #9  
Old 7 Feb 2006
Contributing Member
HUBB regular
 
Join Date: Jan 2004
Location: Birmingham
Posts: 59
Looks nice and clean! Did you just order new parts off Honda?
Reply With Quote
  #10  
Old 7 Feb 2006
BCK_973's Avatar
Registered Users
Veteran HUBBer
 
Join Date: Mar 2005
Location: Buenos Aires,City of good sex,mate and asado!
Posts: 539
Great job so far!
Did you found a place for the battery?
And the starter button and all that stuff?
Keep us informed.
And the total investment.....time+money.
KH

------------------
http://viento-de-ripio.blogspot.com/
__________________
http://vientoderipio.blogspot.com/
America is a nice continent,not a country.All people who lives in this continent are americans.Discover it in peace!
Reply With Quote
  #11  
Old 7 Feb 2006
Registered Users
New on the HUBB
 
Join Date: Feb 2006
Location: Melbourne Victoria Australia
Posts: 14
Yes I bought almost all the parts off of Honda.

as for investment - does it matter really?

I think I am the only person I have seen on the internet at least who is doing this. That alone makes it worthwhile imho!!!

If anyone knows anyone eho has done this conversion please let get them to post and put up any suggestions.

Basically it is easier to retain the electrics and flywheel of the XR600 and make an adpater to push all this out so the 650l starter gear and clutch can be put in.

The 650L flwyheel weighs a ton!!!

I have to make an adapter to fit everything but I'm confident that it will work.

The stator is being rewound for more power and I'll continue to run the same split power system that the XR600 Australian model does.

The 650L has a much more hefty electrical system in that it is 3 phase and has a massive wiring loom which has a lot of crap on it.

I will be using the XR650l regulator/rectifier and will have that wired to my rewound XR600 stator.

The battery is a 5 series Yuasa which will be placed in the front of the airbox.

The starter switch is XR650l wired for the XR600 loom.

thats all for now

[This message has been edited by rmhrc628 (edited 06 February 2006).]
Reply With Quote
  #12  
Old 7 Feb 2006
Contributing Member
HUBB regular
 
Join Date: Jan 2004
Location: Birmingham
Posts: 59
Fantastic Man. This is great news. Wish I'd thought of it (just buying new bits that is) - obvious really. My 600 is an Australian too - 2000 vintage. I had Baja Designs re-wind the stator for me, and have done lots of other mods to it, so would really like to keep the bike. Apart from a little oil puffing on roll-offs it runs great. However, my right knee is failing often these days (broke my left leg and pelvis 15 years ago, and all this time have been favouring the right leg which has worn it out ahead of time). So I really need an electric start. I'm going to order some parts this week. For now it looks like LHS case, gasket, starter motor and clutch. Is that about it? I've already got a heavy duty regulator / rectifier. I wonder whether you might need a CDI unit with more oomph - the Vortex CDI springs to mind.

I agree about the investment thing by the way - its rarely about that with bikes.

[This message has been edited by Cugel (edited 07 February 2006).]

[This message has been edited by Cugel (edited 07 February 2006).]
Reply With Quote
  #13  
Old 8 Feb 2006
Registered Users
New on the HUBB
 
Join Date: Feb 2006
Location: Melbourne Victoria Australia
Posts: 14
hey there cugel

I think retinaing as much XR600 as possible is what you should do.

The 650l quite frankly is overweight and non responsive.

Reply With Quote
  #14  
Old 8 Feb 2006
BCK_973's Avatar
Registered Users
Veteran HUBBer
 
Join Date: Mar 2005
Location: Buenos Aires,City of good sex,mate and asado!
Posts: 539
What i mean with investment is part of the budget.If you tell me that conversion cost you less then 300 US,then is possible to do for allmost all xr 600 riders,now if you decided anyway no matter the final cost,ok.
This is my point.
Keep posting more infos.
Bye
KH
__________________
http://vientoderipio.blogspot.com/
America is a nice continent,not a country.All people who lives in this continent are americans.Discover it in peace!
Reply With Quote
  #15  
Old 9 Feb 2006
Registered Users
New on the HUBB
 
Join Date: Feb 2006
Location: Melbourne Victoria Australia
Posts: 14
cost is not an issue.

the bike must have estart.

Reply With Quote
Reply


LinkBacks (?)
LinkBack to this Thread: https://www.horizonsunlimited.com/hubb/honda-tech/electric-start-xr600r-8916
Posted By For Type Date
xr stuff electric start – Pdf User Manuals Free Download This thread Refback 22 Apr 2021 20:32

Currently Active Users Viewing This Thread: 5 (0 Registered Users and/or Members and 5 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


 
 

Announcements

Thinking about traveling? Not sure about the whole thing? Watch the HU Achievable Dream Video Trailers and then get ALL the information you need to get inspired and learn how to travel anywhere in the world!

Have YOU ever wondered who has ridden around the world? We did too - and now here's the list of Circumnavigators!
Check it out now
, and add your information if we didn't find you.

Next HU Eventscalendar

HU Event and other updates on the HUBB Forum "Traveller's Advisories" thread.
ALL Dates subject to change.

2024:

Add yourself to the Updates List for each event!

Questions about an event? Ask here

HUBBUK: info

See all event details

 
World's most listened to Adventure Motorbike Show!
Check the RAW segments; Grant, your HU host is on every month!
Episodes below to listen to while you, err, pretend to do something or other...

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

"Ultimate global guide for red-blooded bikers planning overseas exploration. Covers choice & preparation of best bike, shipping overseas, baggage design, riding techniques, travel health, visas, documentation, safety and useful addresses." Recommended. (Grant)



Ripcord Rescue Travel Insurance.

Ripcord Rescue Travel Insurance™ combines into a single integrated program the best evacuation and rescue with the premier travel insurance coverages designed for adventurers.

Led by special operations veterans, Stanford Medicine affiliated physicians, paramedics and other travel experts, Ripcord is perfect for adventure seekers, climbers, skiers, sports enthusiasts, hunters, international travelers, humanitarian efforts, expeditions and more.

Ripcord travel protection is now available for ALL nationalities, and travel is covered on motorcycles of all sizes!


 

What others say about HU...

"This site is the BIBLE for international bike travelers." Greg, Australia

"Thank you! The web site, The travels, The insight, The inspiration, Everything, just thanks." Colin, UK

"My friend and I are planning a trip from Singapore to England... We found (the HU) site invaluable as an aid to planning and have based a lot of our purchases (bikes, riding gear, etc.) on what we have learned from this site." Phil, Australia

"I for one always had an adventurous spirit, but you and Susan lit the fire for my trip and I'll be forever grateful for what you two do to inspire others to just do it." Brent, USA

"Your website is a mecca of valuable information and the (video) series is informative, entertaining, and inspiring!" Jennifer, Canada

"Your worldwide organisation and events are the Go To places to for all serious touring and aspiring touring bikers." Trevor, South Africa

"This is the answer to all my questions." Haydn, Australia

"Keep going the excellent work you are doing for Horizons Unlimited - I love it!" Thomas, Germany

Lots more comments here!



Five books by Graham Field!

Diaries of a compulsive traveller
by Graham Field
Book, eBook, Audiobook

"A compelling, honest, inspiring and entertaining writing style with a built-in feel-good factor" Get them NOW from the authors' website and Amazon.com, Amazon.ca, Amazon.co.uk.



Back Road Map Books and Backroad GPS Maps for all of Canada - a must have!

New to Horizons Unlimited?

New to motorcycle travelling? New to the HU site? Confused? Too many options? It's really very simple - just 4 easy steps!

Horizons Unlimited was founded in 1997 by Grant and Susan Johnson following their journey around the world on a BMW R80G/S.

Susan and Grant Johnson Read more about Grant & Susan's story

Membership - help keep us going!

Horizons Unlimited is not a big multi-national company, just two people who love motorcycle travel and have grown what started as a hobby in 1997 into a full time job (usually 8-10 hours per day and 7 days a week) and a labour of love. To keep it going and a roof over our heads, we run events all over the world with the help of volunteers; we sell inspirational and informative DVDs; we have a few selected advertisers; and we make a small amount from memberships.

You don't have to be a Member to come to an HU meeting, access the website, or ask questions on the HUBB. What you get for your membership contribution is our sincere gratitude, good karma and knowing that you're helping to keep the motorcycle travel dream alive. Contributing Members and Gold Members do get additional features on the HUBB. Here's a list of all the Member benefits on the HUBB.




All times are GMT +1. The time now is 05:40.