Mitisbushi Canter
Hi I have a Mitisbushi Canter truck year 2000 same as the Fuso done about 35000 miles.
Its not 4x4 and my work truck but I need some advice and know there is alot of knowledge here.
When I press the clutch pedal it is very hard at first. If you push very hard it will move about 10mm and then feel ok and work ok. When you try to press again same thing.
I had a similar problem on a ford transit and it was just the ratchet on the cluch cable so I thought my canter would be an easy fix.
A mechanic had a quick look and there was fluid by the clutch pedal he said I need a new master cylinder.
I spoke to the mechanic who works on my truck and without seeing my truck he says I need a new clutch and possible master cylinder if I have bent some thing in the cylinder.
The clutch is about £480 labour about £350 plus vat thats without the master cylinder.
Does this sound ok
The truck is in London and due to new emission laws I can only use it for another 12 months so would rather not spend best part of £1000 if possible
Thanks
I have had this truck 8 years and this is the first problem.
|