Horizons Unlimited - The HUBB

Horizons Unlimited - The HUBB (https://www.horizonsunlimited.com/hubb/)
-   BMW Tech (https://www.horizonsunlimited.com/hubb/bmw-tech/)
-   -   BMW F800GSA Luggage (https://www.horizonsunlimited.com/hubb/bmw-tech/bmw-f800gsa-luggage-93334)

wackojacko 29 Oct 2017 19:06

BMW F800GSA Luggage
 
Hello everyone,

I have put around 9000 miles on my GS since June, so to say the least im getting a little bored of the local scenery and need to go further afield.

I am in the market for a set of panniers and maybe top box.

Currently the bike has the frame for the bmw panniers installed so if someone has a set of bmw panniers for sale that'd be great. If you have a set including the frame please reply as well .

Or if anyone would have any recommendations, they would also be greatly appreciated

Thanks Jack

big fella 28 Nov 2017 11:29

Quote:

Originally Posted by wackojacko (Post 573098)
Hello everyone,



I have put around 9000 miles on my GS since June, so to say the least im getting a little bored of the local scenery and need to go further afield.



I am in the market for a set of panniers and maybe top box.



Currently the bike has the frame for the bmw panniers installed so if someone has a set of bmw panniers for sale that'd be great. If you have a set including the frame please reply as well .



Or if anyone would have any recommendations, they would also be greatly appreciated



Thanks Jack



The bmw panniers are hard to find at a decent price. I used a set of giant loop siskiu soft bags for a few trips with no issue till a set of bmw panniers came up.


Sent from my iPhone using Tapatalk

Road Hog 1 Jan 2018 02:33

There is no nice way to say it, the F800 GSA has a fat ass. If you put the BMW boxes on you will be about as wide as a small car. I looked at many options then built my own. They fit tight in and have lots of room. Made from 2 mil Aluminum. They are no wider than the handle bars. This is the second set I have made after the first set I said never again, too much work. But this set was much easier because of what I learned on the first set. If you have a few basic tools and know a welder that will weld them up for a reasonable fee and a sheet metal shop to do some bending, you can do it.
I have some pictures but not at this computer. Send me a PM if you want to explore this option.
Bob:scooter:


All times are GMT +1. The time now is 15:53.


vB.Sponsors