Horizons Unlimited - The HUBB

Horizons Unlimited - The HUBB (https://www.horizonsunlimited.com/hubb/)
-   Yamaha Tech (https://www.horizonsunlimited.com/hubb/yamaha-tech/)
-   -   XT600 oil bleed screw (https://www.horizonsunlimited.com/hubb/yamaha-tech/xt600-oil-bleed-screw-27818)

Walkabout 26 Jun 2007 16:34

Strainer
 
I guess you are not referring to the oil filter Joe (you've been doing work on that) - so the oil "strainer" must be where the oil is scavenged from the sump and pumped back to the oil storage tank.

Shows in your manual? (for my bike it is a flattish, pancake type of thing low down in the sump according to my manual - buried deep in the workings and I have never seen it therefore).

Dave

Joe B 27 Jun 2007 01:04

Dave,

Thanks again for all your help. This site is GREAT!!! I pulled both valve adjusting plugs with it running and there is lots of oil getting to the top of the head, so I think I will run it and see what develops. If you ever get to Montana or the western US give me a call.

Thanks
Joe Billow

Walkabout 27 Jun 2007 09:52

You bet!!
Don't forget the other posters on here as well Joe! :thumbup1: Just kidding.

Keep checking the oil level as well,

Cheers,

Dave


All times are GMT +1. The time now is 16:43.


vB.Sponsors