check the carb bowl drain screws are tight the hose with the valve on goes to the air box i think as i got rid of the yam carbs :innocent:

its a screw head above the neutral switch on mine and i'm still using that alternative clutch arm :rolleyes2:

main earth lead goes to a starter mounting bolt and another should go to the chassis :cool4:

I havnt got any of them leads :(
I have a homemade wire from battery to the frame that's all, there is a black wire coming from the starter solenoid (the round thing) next to the battery and I have no wire to connect to it

you need a thick cable at least as thick as thick as the positive lead from the starter motor to the solenoid as an earth to the motor.

thanks wolfzero all sorted now :)
needle was stuck and needed a little assistance

Hi widget2k4. Can I know what is the engine of your xt600? Or kindly show some pics. of you xt600.