single carb xt600 2003
 

hello from Crete! so recently i decided to properly fix my single carb mod , because i had some problems (kept getting air from somewhere and it was splattery and carb kept falling off!)
i decided to mill the carb and fit it in the intake and have small cut on the intake and just put a heavy duty clamp on it...
now it works like a charm...
didn't chop the frame at all... the carb is a mechanical dellorto phm 38mm

https://imgur.com/a/dIxDa

It's nice when you have access to all the good tools! ;)

Show some pictures of the bike!

Well that is a picture from last year... When the carb was at more than 40 degrees angle and it had fallen off... I was waiting to be picked up! https://uploads.tapatalk-cdn.com/201...329aca3dd6.jpg

Sent from my MI 5 using Tapatalk