900 trophy electrical problem
 

Hi All
hope someone can assist when i try to start the bike put key in ignition
all indicaters ie neutral oil lights ok, battery ok,kill switch not on,clutch in etc.
Then i depress the starter switch nothing happens no turn over nothing
be very grateful for any assistance.

Don't know anything about your bike specifically but,
Does the bike have an immobiliser on it?
Is it fuel injected or carbs?
Have you tried jump starting it?
Have you tried bump starting?

Rich

The fact that you say nothing happens say to me it's the starter relay or before. If it was the starter motor or low voltage you usually get a click out of the relay.

I'm sorry to say you need to get a wiring diagram and multimeter and start following the voltage. The circuit is battery- fuse-imobiliser (if fitted) - ignition- kill switch - starter switch - relay. The fuse and switches are easy to test, the relay easy to swap. To prove the point, you can always jump 12 volts straight onto the relay. If it turns over the problem is nearer the battery still.

Andy

Rich and Andy thanks for the replies
i think ill try the testing of the connections and see how i get on,
i did think that it could be a relay /loose connection but im no expert.
ill let you know

Jamie

Get yourself over to here TriumphTrophy : Hinckley Triumph Trophy Online Community you will get all the answers you need from fellow Trophy owners:thumbup1: You will have to join, but it's free!


Trophymick

Trophy Troubles
 

My Trophy does exactly the same, i will be following my electrics from the start switch down. If i come accross anything, ill let you know. So far, the only other problem has been that the main cable to the starter mootor works its way loose and the arcing causes oxidising of the connection, followed closely by very poor starting. Emery paper and a 10mm spanner sorted that one!