Kaiser
 

I'm new to HU so greetings to all.I live near Oxford.
Can anyone help with a problem I now have have following fitting a new clutch friction plate and diaphragm to my 1982 R100RS? Maybe one for Steve Pickard!
The problem is that the clutch actuator arm how just moves in without any resistance; in other words absolutely no clutch! It was operating prior to my "interference". I have taken the gearbox and clutch out two E but still no results and nothing g left over! It seems that the pushrod is passing through the hole in the centre of the diaphragm.
Thanks to anyone who can help

PS. I should have said that my name is Karl.

PPS. Just tried again; set arm at 8" using the adjuster at the handlebar lever, screwed the adjuster on gearbox arm right in but no clutch!😣

R100rs
 

Hope someone can help, that RS needs an outing.beer

Kaiser
 

Many thanks Mr Bling; the RRS definitely needs an outing to keep me off the Jap-Crap plus the battery in the IRS has decided to go to Valhalla!!!!!!