![]() |
@ Jack, Dave: thx!
Quote:
Since I have to wait for registration till 2015, what is really very hard for me :( I took some photos in the garage yesterday: http://up.picr.de/20488885gs.jpg http://up.picr.de/20488886yf.jpg http://up.picr.de/20488887ei.jpg http://up.picr.de/20488888lc.jpg http://up.picr.de/20488889qp.jpg http://up.picr.de/20488890la.jpg http://up.picr.de/20488891wq.jpg http://up.picr.de/20488892qv.jpg http://up.picr.de/20489015jd.jpg http://up.picr.de/20489016ez.jpg http://up.picr.de/20488893hv.jpg Love it! So long, da Wolf |
A beautiful bike!
In every picture I have seen so far the bike comes without a chain guard and it was the same at the UK show; from memory none of those bikes on display were fitted with a guard. At the show I think I saw tapped holes in the top of the swinging arm for fitting a guard - are they an optional extra? |
Some words of caution
After previously slagging off the Ccm brand and the BMW g450 donor engine I went and test rode the Ccm 450 at a relatively recent travel biker's event in the UK. In a perverse sort of way I wanted to like the bike. However I didn't. Some people might think I'm just trolling around causing mischief. I'm not!
I would not recommend this bike to any friends of mine. On the paved road it felt okish. On the dirt it was downright dangerous. The front end geometry and handling felt all wrong. The throttle response was either on or off. The vibes through the pegs were too severe. I've plenty of experience of similar bikes ( drz400e and BMW x challenge).3 other people with long adventure riding cvs had similar opinions. If you want to buy one of these bikes please take an extensive off road test ride before you buy. It may be your thing but it most definitely wasn't mine. |
CCM 450 at Stockholm MC Mässan 22.-25.Jan 2015
Now we have a green light: one CCM GP 450 Adventure will be on display at the Stockholm Motorcycle Show this month at stand A33:62 (explore360). This will be the bike orderd by me, including some nice extras like adjustable windscreen, engine guard, adjustable back damper, soft luggage system, among others. By then we will also have a rough plan in place for two test riding events this spring: most likely one in the Stockholm area and one bigger event in Delsbo at the dealer NCCR's place! We are aiming to get several bikes over from the UK for those guided group test rides, more about this when the logistics are fixed. So for those in Sweden: welcome at MC Mässan, let's talk adventure there! PS: I can absolutely not agree to Chris opinion, I have been on a long ride on the bike recently in the UK. But of course at those test ride events everyone will be able to get a first hand impression her/himself! |
Good man minkyhead!
Quote:
THANK YOU :clap: for all of the information and FIRSTHAND no BS account of your experience with the GP450. I have read what you have posted on three websites- you are one of the best sources of good information, from what I see. As well, forums are enhanced by your kind but passionate prose! :mchappy: |
I wish anyone well with their new bike and hope its a happy journey.
They look ace but then so did my CCM 604 back in 1999, it had lots of trick parts and looked so sweet, but looks arent everything and I'm afraid thats where the dream ended. To put it mildly it was the most unreiliable heap of shite, when it ran it was a joy it let me down so many times it ruined all that, I was lucky to enjoy a trip to Portugal and back across the Picos Europa but I could have done the same on a Honda without all the heartache and I would probably still own the XR 400 that I should have purchased instead of the CCM. I remember the week before I picked mine up MCN suddenly ran an article on how tempremental they were and I very nearly cancelled mine!!doh Its all well and good saying people are giving negative opinions, well the negativity comes from a high cost product from a company with a very sketchy background. If I had 8k to invest in a bike I don't think I would take a gamble on an unproven product that could completely ruin an adventure. Are CCM still knocking out chineese junk re branded with red plastics and snazzy graphics for double what they cost elsewhere? Yeah great company destroying the future of biking by selling utter tat to youngsters who could be put off motorcycling for life and don't have the spare money to keep replacing engines made from jelly. I really do hope this new venture works for them because its not fair to charge 8k for a bike that the customers are going to develop and test for you. Just make sure that if you venture far away from civilisation on one of these that you take a mate on a proven bike to bring you home. |
Quote:
In my 45 years of motorcycle riding, motos have failed me- including transmissions on a Suzuki and a Yamaha, and electrical problems and general craziness of a Husky CR360 like Mikkola used. As well a Suzuki did well for two seasons traveling, as has a Yamaha that is very good but tends to get a lot of unreasonable illogical dissing online- much like the above. What is online about the GP450 supports overwhelmingly that it is a very good moto, and thus far no big problems showing up. |
One of these bikes has been used to follow the 2015 Dakar race; pics in the link -
http://www.adventurebikerider.com/fo...t=10&start=170 |
Quote:
http://www.horizonsunlimited.com/hub...ure-bike-69964 Pretty much covers it all. I'm on there with a few opinions as is Stuxtttr and several other knowledgeable HUBB members with VAST experience. it's 20 some pages and well worth the read if you want a broader ranges of voices on the CCM450 GP, the companies history and it's future. Very useful thread with a few diversions. All that said ... one can't deny the questionable history of CCM. But for me, I'm totally willing to give CCM the benefit of the doubt. Lets just not forget that the CCM "Phoenix" has risen from ashes at least twice (I'm aware of) ... and I know little about them, never owned or ridden one. Maybe more to their history ... :innocent: ?? But seems they've gone back to "ze old drawing board" more than once ... and this bike really does look good (IMO). But they have carried over a few design elements I disagree with .... namely the swingarm shaft going through the countershaft. This is Horst Leitner's (ATK) idea ... and failed on several bikes ... including BMW's own World Enduro GP race bikes when David Knight was riding for them. It's also a BAD IDEA to have on a travel bike for a number of reasons. (remove swingarm for sprocket change or changing chain? doh) I rode ATK's in the 90's and watched these systems fail ... in person. The rear brake rotor was also located up on the countershaft! doh They burnt up... literally. Some say it helps handling. If it's such a good idea how come no world champion race bikes use it? NONE of the Japanese use it ... but I do know they tried it ... back in the 1980 ...and realized it was NOT SUITED for a Moto cross or off road bike. They never went back to it. See also: ATK motorcycles - Wikipedia, the free encyclopedia ATK models & brand history - autoevolution Here in California, my local dealer carried CCM going back to the early to mid 90's. Not positive, but IIRC the first one I saw used a Rotax motor? Next one I saw a few years later used (I think) either a Suzuki DR650 motor or a DRZ400 motor?? ... don't recall which. The bikes looked pretty trick ... but very few were sold, dealer ended up eating it on them. I doubt he'll be signed up to carry anymore CCM, given his 10 years (or so) of experience with them. I wish CCM all the best ... and many have very short memories and don't do research. So who knows? Perhaps CCM have a shot at success. We DO need such a bike in this class, that we all pretty much agree on. But is the CCM more a Race Bike more suited to racing the Dakar than going RTW on a budget? :smiliex: :scooter: |
Quote:
Quote:
|
Quote:
I think that you and most others reading this know about what has been posted, but thanks for that arrogant challenge. CCM 450 Adventure - ADVrider http://www.adventurebikerider.com/fo...happy-day.html Edit to add- Thanks to the above posting I read some of the previous thread. Chris, you speak as if you have very serious hatred toward anything CCM in that thread. I just find it distasteful that such arrogant and derisive comments are railed against the real and extensive accounts of a decent, regular guy. Yep, got it, nothing from CCM EVER is ok with Chris. Thanks. |
Quote:
The data that is accumulating in regard to the CCM GP450 so far seems ok. Wait and see. |
Quote:
Thanks to folks who take the time to give useful information, And huge thanks to Minkyhead, ViennaWolfe, the guy at the Dakar, and others who actually ride the moto.:clap: Early days, something could go wrong, but for now the GP450 looks good. That said, for me personally it will be unlikely but not out of the question that I would go for the GP450. I like what I currently ride, it suits the geography of my area. But it looks like this CCM GP450 is a well done effort, as far as it has been shown thus far. |
Quote:
In the UK we just don't do "forgive", never mind "forget", especially in business. I think this results in a lack of entrepreneurs in Britain: much business research has been done on this matter - we punish miscreant businesses very harshly compared with the business law in the USA. I think I have read, or heard in conversation with the CCM staff at the UK show last November, that the front sprocket can be removed without detaching the swinging arm: hopefully, one or more of the new owners can confirm if this is the case. |
I hope I'm wrong on that ... but seems it was stated early on in discussions on the CCM? Not really sure. Anyone confirm?
Where and how does the swingarm attach? Does main splined drive shaft go through swing arm and countershaft sprocket? I know the BMW 450 GP race bikes used this system. With this system I would also be concerned with bearing wear. Normally swingarm bearings aren't something RTW riders need to worry about very often. But with that system? Dunno ? :confused1: I'll have a look on CCM site and report back. EDIT: OK, here is what is stated on CCM website: Swingarm Race track derived rear swing arm using a pivot point near to concentric with the output shaft to reduce chain tension variation and increase traction on loose surfaces. Careful controlled lateral flex leads to a swingarm giving a smooth and predictable ride on the road with the strength and ability to handle the toughest terrain possible. I question the "race track derived" ... what major OEM race team has ever used such a system besides BMW's very brief involvement in World Enduro? The above statement seems bit vague, anyone have a more detailed technical explanation? |
All times are GMT +1. The time now is 10:49. |