Changed my can as well...
 

Mainly so I could fit the panniers in nice and tight. I used my KLE for commuting (lots of filtering) and the only real problem was not being able to fit the centre stand with this exhaust. The can is right-hand side from an XJR1200, nos cheap on ebay.
Cheers, Richard.

hey wobbly,

Nice silencer - great idea for fitting the panniers. What's it sound like?

I ended up mounting a bracket to keep my soft panniers from touching my silencer.

I've been struggling to find replacement headers and have just seen these on eBay - handy for when my headers succumb to rust!

http://www.ebay.co.uk/itm/1406202388...84.m1423.l2649

Cheers, Rory

Hi Roy
 

It sounded like a normal jap bike bike, too damn quiet!
The pipes from sandybikespares look good. I've used their downpipes on my 600 fazer and an 600 diversion at work with no probs. The only issue would be if you to use a centre stand, best check before you buy any.

Cheers, Richard.

Hi Guys

Here's a sketch of the how I attached the KTM silencer. It might help anyone who's keen to do the mod.

Cheers, Rory

Ive just ordered one of these
Lextek Slip-on Exhaust Silencer Race Can Kawasaki Z 1000 Z1000 03-06 Motorcycle | eBay


looks to be about the right length and diameter with a 51mm inlet so hopefully it will fit straight on, bit nervy in cutting the old system though lol

Ill post up some piccies once done see what you guys think

Hey. It would be nice to see pics of how it ended. Unfortunally I don't have garage, I will have to wait for cca 2 months, to get my KLE from my place to welder..Too cold for a drive :) but thanks to mrsibanda, I have a clear idea what to do :) I will post some pictures too.

here we go

http://i225.photobucket.com/albums/d...ps75f62ee9.jpg

And the sound? :) Could you upload a video? Looks great!! :)

OMG thats by far to technical for me to do unless someone can tell me how its done !!!

But it does sound nice lol :funmeteryes:

Cant beleive with the arsenal of bikes ive now got this little thing has inspired me and ive just finished addressing some of the points that others say are an issue and have
Replaced
Renthal enduro High bars
16t front sprocket (now Back to STD 17)
Decent Handguards
DNA air filter
End Can
Pazzo short levers
Fat Foot Pegs
EBC sintered HH pads
Braided brake hoses
Pirelli MT21s
Heated Grips
30mm raised dog bones
forks dropped in yolkes
Givi Trekka 46ltr
12v Acc Socket
Removet the crappy bit under reat mudguard
Smaller no plate
raised front mudguard 1.5 Inch (Not pictured below)

Triumph tiger 800 hasnt been touched since I bought this
My turbo Hayabusa has only done 31 miles since the last MOT 8 Months ago
BMW 1150GS ADVSE still in plastic bubble done 16 miles since i bought it !!
Suzuki RV125 Still needs a refurb
1600 Marauder 50 miles since full restoration (Now for sale )

Complete exhaust system
 

Hi there all,

I had a complete exhaust system fitted to my 2007 model. It ran better straight off ie:without re-jetting. Already had a better airfilter fitted - unifilter brand. Got about an extra 20 - 25 KM from full tank to reserve.

Cost was $ 700 AUD, but that got rid of the cats and uneven headers. Lost about 15 mm in clearance and probably means I cannot fit centre stand.

Then added athe larger snorkel with the front airbox cover modified as per the german instruction, to open the airbox up. At the same time had the main jets changed to 115's (or maybe 118's ??).

This changed the whole effect. Revs free from idle to redline (not done often) without the loss of power above about 8500 RPM as previously experienced. Also used to labour below 3000 RPM, now this effect is at about 2200 RPM. Fuel consumption did not alter from the increase after the exhaust change.

I don't expect it to be a race machine (not bought for that purpose), but it has inreased the percieved power and is easier to handle at slower speeds and in traffic etc. Another benefit is the exhaust note is louder than stock, so now cagers can actually hear me when alongside them, that way they have an idea there is something nearby them and (most times) have a look before moving accross lanes.

Regards,

Shaun

My KLE all done waiting to go out for a decent ride

http://i225.photobucket.com/albums/d...pse9775e87.jpg

Could you share what Headers and some photos of it? The mileage improvement seems great!

KLE500 exhaust
 

Hi there Austinmation,

photo's of exhaust are not possible at the moment. I crashed it about two weeks ago and it is currently with my mechanic awaiting insurance assessment.

I am also away from the district at present and will not be back until 19/20 Mar. Will take photo's after then, if the insurance hasn't written it off and taken it away by then.

Regards,

Shaun

Exhaust system
 

Hey again all,

cannot get photo's of the aftermarket exhaust system at this time. The insurance company have written it off and are sending it to a an auction house, without allowing me to buy the wreck beforehand.

The rear frame was bent and as such became an immediate write off.

Word of warning - had over $2900.00 of accessories fitted (not including some of the fittment costs), had informed the insurance company. Now with a claim in, I am informed the value insured did not increase to cover the accessories. Value they will give is the market value and to them it includes everything on it.

Thus out of pocket once again.

Check your insurance value and the coverage they provide.

Expensive lesson learned.

Fun riding everyone.

Shaun