Horizons Unlimited - The HUBB

Horizons Unlimited - The HUBB (https://www.horizonsunlimited.com/hubb/)
-   Honda Tech (https://www.horizonsunlimited.com/hubb/honda-tech/)
-   -   rear tire replacement (https://www.horizonsunlimited.com/hubb/honda-tech/rear-tire-replacement-21109)

Alex Rubtsov 18 Apr 2006 12:39

rear tire replacement
 
Hi all. Have you some knowledge how to tear off a tire from the rim? If it happened on the roadside especially. I think should be some device for doing it on the road.

Alex

Caminando 18 Apr 2006 13:42

tyres
 
Hi Alex

There's too much to tell here about tyrechanging. There are good books on this available.

Far, far better, is to come to Lumb Farm this summer where there is an excellent tyre changing class - hands on experience. Better than 10 books.

The HUBB will save you from roadside problems!

Good roads

Alex Rubtsov 19 Apr 2006 13:10

wheel clamp
 
I think about small tire clamp. I have looked for it in Louis, Heingeriche, etc but did not succeed.
Alex

Ironbutt 19 Apr 2006 13:29

Rear tyre removal
 
Alex,

I have used two methods to remove a tyre on the road.

1. Remove the wheel and lay it down on a solid surface. Stand with your one foot as close to the rim as you can and bounce on the tyre. This should loosen it from the rim.

2. Find a piece of wood like a two by four with a flat end with no splinters and put this on the tyre close to the rim. You then hit it with another piece of wood or a rock and this will also seperate the tyre from the rim.

After the above you only require two small tyre levers or two pieces of flat bar to remove the tyre from the rim completely. One suggestion is to put some soapy water on the edges of the tyre when pulling it off or putting it back on.

Regards
Frank

Chris of Japan 19 Apr 2006 14:37

bead breaker
 
Alex,
I think you mean a 'bead breaker'
Here is a portable one I found on the internet.
http://www.pitposse.com/potibebr.html

This is the old-fashion way:) :
http://www.webbikeworld.com/t2/bead-...ad-breaker.htm

After you break the bead, regular tire irons should get the tire off the rim.
Be careful not to pinch the tube like I do...

Chris

POB/London 19 Apr 2006 14:37

Wheel on the side, use the side-stand of the bike and its weight to 'break' the bead.

Alex Rubtsov 20 Apr 2006 08:25

bead breaker
 
Excuse me for my poor english. Certainly I have meant a bead breaker )). Thanks Chris.The first method Ironbutt said is not successful for knobby 140/80-17 tire. Mine 75 kg are not enough )). The method with lever was tried by me. It is more effective but not everywhere I can find a lever. I think the Portable Tire Bead Breaker Chris said is useful thing.

Thanks
Alex.


All times are GMT +1. The time now is 23:29.


vB.Sponsors