good changes for Africa Twin 2018
 

For 2018 we'll have few updates, among the others bigger tank and wider foot pegs mounted on steel brackets not alu cast. Good move from honda, but they should start with this from the beginning.

important changes:

chassis:
Wet weight 2kg lighter at 230kg (MT version)
Rider footepgs and pillion footpeg hangers redesigned for off-road use
Stainless steel spokes improve durability and ease of care
New Emergency Stop Signal function for rear indicators

engine:
New intake design and exhaust aid mid-range response
New exhaust also designed to improve engine note
New lighter balance shaft weight
New lithium-ion battery saves 2.3 kg and enhances durability
Power is smooth and consistent, with linear torque delivery

Engine management electronics:
TBW brings with it 3 rider modes to tailor engine character and traction
The riding modes are comprised of different levels of Power (P), Engine Braking (EB) and Honda Selectable Torque Control (HSTC)
HSTC now has 7 levels and OFF
Assist/slipper clutch helps upshifts and downshifts

https://hondanews.eu/eu/en/motorcycl...0l-africa-twin

http://www.roadracingworld.com/RFS/2...b.jpg?size=630

good changes for Africa Twin 2018
 

Hi, also:

- 12V socket
and
- grip heating

but only in the Adventure Sport model!
Let's wait and see what all this things will cost :cool4:

Regards NightAlp

As posted about a week ago, in the other thread about the "new" AT
 

Wider, taller in the saddle - bigger all round basically, heavier, more electronic technology (fly by wire throttle in particular) and more expensive.
The new one comes in one colour scheme only, being a special edition to commemorate some date known unto Honda.

What's not to like?

I they're the same heated grips as the 'previous' model, I would stay well clear, even if free! I paid around £200 for mine and they were useless. I'd be interested to see what the mpg of the 'adventure sport' model is suggested as being, though. More fuel capacity buy heavier bike - will 5l add an appreciably longer distance? With the GS ADV being 30l, even 24l doesn't seem that much.

At the NEC last year, Honda made a big deal about the AT being simple (relatively, I appreciate) and robust for travel. Not sure how the newer one will fit into this mould?

Also, I appreciate hat the lithium ion battery will be lighter, but are there any other benefits over lead? If yes, I might look into a replacement!

I don't know, I have new lithium ion battery on my ktm exc and don't see any benefits. When cold have to crank 2 or 3 times, while the lead starts my honda at first...

price :) but seriously I don't like tubed tyres and throttle by wire.

BTW Current model version ma be available at nice discounts soon, if there are any left overs.

Fly by wire throttle technology leaves me distinctly underwhelmed.
Slipper clutches from the race track to shave milliseconds off the lap times, ditto.
The 2018 colour scheme is straight out of the year "eons ago" - "United Colours of Benetton" advertising would be appropriate.


Quite a few bits and pieces fitted as OEM can be very cheap and need to be replaced quickly - that goes for more than one manufacturer, to keep down the headline pricing in the shop window.
Original sprockets, chains, tyres, suspension, handlebars, to name a few.
So long as the plastics are "shiny new" then the customers will buy.


I prefer what Suzuki have done with their XT range of the VStroms; no holes drilled through a perfectly good rim = tubeless tyres fitted and spokes are still used.
BMW/Behr rims ditto, but Honda probably won't pay royalties to use a patent?

That's not great. My lead battery so far doesn't like the cold, and it's not even that cold in the UK yet! Guess I'll avoid the LI one, then!

It's clear Honda's Africa Twin still seems deficient in a few areas despite updates, but at present has a distinct advantage to most of the competition in the "BIG" and possibly middle weight ADV bike category. Sales are, and will continue strong ... for now. :innocent: No discounts of any note yet on Africa Twins here in bike rich San Francisco Bay Area.

But ... as we know KTM, Yamaha and BMW all have new models on the way. Within a year we should see Yamaha's new Tenere' T7 and KTM's 790 Adventure and Duke. Add BMW's new 850 in the mix too.

One thing I would hope Honda address in the Africa Twin is it's lack of horsepower. To match competition, IMO they need to squeeze maybe 10 to 15 more HP out of that flaccid 1000cc parallel twin.

IMO, a Tubeless option should be a must on the AT. NO ONE wants to screw around with TUBES these days. I loath them on my trusty DR650.

I would still always carry a tube (for variety of reasons) but nice to be able to insert a simple plug into puncture and be back on the road in 15 minutes vs. 1 hour pulling wheel off to swap out Tube.

On Li-Ion batteries:
Like lots of old geezers on here I've been suspicious of these batteries. Now that I have one in my new KTM 690 Duke, must say I'm getting to trust the Li-Ion battery in that bike. (PO put it in the bike on day one)

Also been READING a lot about the Science behind this technology and learning how they really work and about their CARE and FEEDING ... which many get WRONG.

Most common mistake punters make is OVER charging their Li-Ion battery using conventional or even so called SMART charger ... yes, they can ruin a Li-Ion batt if left on too long. (OK for short time)

In addition, most resist the idea (it IS counterintuitive) that you have to "waste" battery power by turning on lights or other accessories in order to "warm up" the Li-ion battery which quickly gets it up to 100% power output ... even in below freezing conditions. IT WORKS!

Most Li-ion batts have more CCA to equivalent Lead Acid batt and can sit for a LONG LONG time and not go dead or discharge. They also RECHARGE in record time vs. typical lead acid battery.

If your bike's Alternator does not put out a lot of Watts ... and you run a lot of accessories like heated clothing, grips, Aux lighting, GPS, communication, then you can run down your Li-Ion just like a conventional Lead Acid battery.

The good news is a Li-Ion will recharge back up in less time than a Lead Acid battery ... and mostly all that is required is RIDING the bike with some accessories turned OFF.

For me, I now carry a tiny Anti-Gravity Li-ion jumper battery. Works a treat. Or, carry a small charger to hook up at Hotel at day's end. Good news? Your Li-Ion will be recharged to 100% in an hour .. or less! :clap:

well, I know about this, that's the reason you have to crank it 2-3 times to just to warm up the battery but from the user experience standpoint it's a little like step back, isn't it?

Imagine you are camping in Rockies Mounties and in the morning grizzly woke you up, what you do? you jump on motorcycle trying to start it up and run for your life but no luck! battery needs to be warmed up, you need to crank 2-3 times with few seconds pause between...and you're dead :(

Just in case anyone was considering using the new larger tank with last year's bike, it doesn't appear to be that easy. Although Honda told me at the NEC that there were no changes in the frame between the two bikes, the front fairing is different; this means that you'd need to buy the new tank AND the fairing, quite an outlay! Far easier to get a 5l can! doh

Re the battery debate, here's a REALLY GOOD article and discussion on the technologies of various batteries.

I couldn't agree more, and the forthcoming BMW F850GS has tubeless tyres on spoked wheels which is a great step forward. Given the choice in the past between the F800GS and the F650GS twin I twice chose the F650GS due to it having alloys wheels and therefore tubeless tyres as standard.

There's no tubeless option on smaller KTMs so I run mousses on my KTM 690 Enduro. No need to carry tyre levers (tire irons), bike support, spare tubes, compressor. The first set of mousses I ran for 9,500 km, the second set for 7,500 km. Now on my third set. The decision to fit new mousses was more a concern whether they would last another 4,000 km for the next trip rather than them being at end of life.

wonder how mousses fail, I mean what happens actually with the wheel when mouses breaks. Can you still ride at least slowly?

Been thinking about fitting them to my 500 exc but still a bit expensive, 100 euro or so vs 5 euro for a tube...I understand no mouses yet for heavier bikes like tenere etc?

there is also longer front suspension travel probably because of bigger tank.

"Myth: Lithium batteries must be kept fully charged at all times

LFP batteries tend to function best when kept between 13.05 and 13.6 volts, but if they are discharged below 10 volts, that messes with the chemical balance in the electrolyte. An LFP battery discharged below 13 volts is unlikely to even start the motorcycle, which would lead many riders to try to jump or bump start the bike. This is a mistake; the unique charging requirements of an LFP battery (see the next myth) mean that bump starting the bike and engaging the motorcycle’s onboard charging system is likely to damage the LFP battery’s cells, causing them to eventually overheat and possibly catch fire."


I think the author needs to get out more ... reports from DOZENS of Li Po battery users I've read indicates bump starting is perfectly fine. Once bike starts the bikes charging system takes over as normal and will bring the Li Po batt back up to full capacity ... and very quickly vs. AGM.

Unlikely bike will catch fire (super hyperbole there!) as long as the bikes charging system is not faulty. There is a very remote chance that if the Regulator/Rectifier are faulty then it could allow for battery over charge.
But even then, a FIRE is quite unlikely.

Most times the "no Start" with Li-Po is the batt needs to be warmed up! So
switch on your headlight and wait a minute. Try again. Many many Li-Po noobs miss this simple fact. As I said earlier, it's counterintuitive but that's how they work.

"Myth: Any charger will do for LFP batteries

If you buy an LFP battery for your motorcycle, don’t cheap out on the charger. It is critically important to buy a charger that is optimized for use on LFP batteries for a number of reasons. The most important reason is that the proper charger “understands” the LFP battery’s unique charging requirements, which are not the same as those for a lead-acid battery—and that includes AGM batteries, which use the same basic electrolyte as your grandfather’s vintage pickup truck’s battery. Bikes with “always on” electronics (clocks, alarms, etc.) will discharge an LFP battery fast; remember that while the lead equivalency may be high, the actual amp-hour capacity is low, and while a good LFP battery charger can bring a discharged battery back from as low as one volt, it has to be done properly, by using low current until the LFP is above 12.8 volts, when it can then be hit with higher current for faster charging. A lead-acid battery charger uses high current at low voltage, which could easily damage that expensive LFP battery.

Both AGM and LFP batteries benefit from being on a charger when the motorcycle is not being ridden, but it is more important for the LFP batteries, which also MUST use a purpose-specific charger. If you have a mix of AGM and LFP batteries in your motorcycle fleet, that means you need more than one charger, and don’t mix them up. In the words of Ghostbuster Dr. Egon Spengler, “That would be bad.”

Once again the author is incorrect. He should study up on what the major Li-Po battery manufacturers have to say on this subject.

I looked at Shorai and Anti-Gravity (I own and use Both) and both companies suggest a conventional "smart charger" like a Battery Tender are FINE for charging and maintaining their Li-Po batteries ... with the caveat that you MUST NOT leave the charger on for too long. You should not plug in and come back in a month. But you can charge the Li-Po until fully charged ... then remove the charger. Also, not a good idea to use a HI AMP charger suited for Automotive. What you find is that Li-Po batts recharge in record time ... so no waiting around for hours like a discharged Lead Acid batt.

The author also fails to mention just how much LONGER a Li-Po battery can sit unused and uncharged and not discharge. This, to me, is a big one! How about months?

Granted, if your bike has an passive alarm system or other electronic items that create a constant parasitic draw ... then yes, even the mighty Li-Po can discharge over time. But even my super high tech Ducati does NOT discharge the Batt parasitically. (no alarm, GPS or Comms)

If Shorai (Number ONE producer of Motorcycle Li-Po batteries) says its OK to use my Battery Tender ... I'll go with that. And remember, Shorai SELL their own Li-Po specific charger ... but DO NOT demand users purchase their charger
with veiled threats of disaster as the BMWMOA guy suggests. Talk about creating myths! :smartass:

And if you look into the hundreds (mostly NON BMW riders) using Li-Po batteries world wide today, this fact can be verified and many other mis-statements above corrected from actual long time Li-Po users.

One mistake many new Li-Po users make is they buy a too low output battery.
If the correct sized Li-Po battery is chosen, most times riders have good experience.

The problem with BMW spoked tubeless wheels in the past has been how soft and weak they were. (Akront I believe?) Hopefully new generation spoked tubeless wheels are a bit tougher?

That's incredible!

I hear there is a "newer" less expensive Mousse product now? Which one are you using? I've never used Mousse inserts but what I always heard was about how HARD they were to install/remove. In the Africa Dakar the teams used to change to new Mousse inserts everyday. Now? Not sure.

I guess on the BIG powerful twins of the old days the Mousse inserts would melt from super high speed running. (over 100 mph)

Obviously OK on your 690. Are you able to change them yourself or does a shop do it? I heard in old days it was a 3 man job. Can any shop do this ... or?

The Michelin tire team at Africa Dakar had special proprietary (or had) equipment to do this job quickly. Now, I hear rumors it's done more easily.

What do you know about this? Seems to me it would make GREAT sense on a 650 class or lighter bike if highway speeds were kept moderate ? (maybe under
70 mph?)

I hear a Mousse is about equal to running about 12 to 14 PSI in your tires. True?

And what about this new mousse product I've heard of? Any info on that?
bier

We've now clocked up 57000 klms on a 16 AT, riding it from Australia to Greece. My thoughts are as follows.

The suspension is cheap and far too soft, especially if riding two up. Additionally we in Australia are finding that the internal hard anodising is wearing away prematually. Honda Australia is aware of the issue, but as yet there has been no determination. I've resprung and revalved the rear Showa to take the weight. I've replaced the front with an Ohlins...........no more excessive diving under brakes. Otherwise too early to make further comment.

The rear right wheel bearing often fails prematurely. I've have now replaced it 3 times. Interestingly some other owners are getting 50000 plus klms. But many and I do mean many in Australia are experiencing early failure of this bearing, like we have. I've now fitted a 4206 dbl row bearing in place of the 6204 original, along with a narrower spacer. Lets see what happens.

I don't give two hoots about tubeless rims. If you are serious about going off road then you need tubes. Ok, I get it about the convenience. but my thoughts are that tose whom wish for tubeless rims either are too lazy to remove tyres or simply don't know how to efficiently. I did a rear Mitas, which can be a brute of a tyre at 13000ft in Kyrgzstan in 1 hr and 20 minutes. So whats the big deal?

The power for the bike I think is adequate. Ok, it's no power house, but for it's intended purpose I think it is fine.

I'm a huge fan of the KISS principal, thus do not care for ride by wire and other electronic "enhancements". What ever is wrong with a push/pull dbl throttle body cable? Nothing I would suggest.

Initially I was VERY disappointed with the 18.8 litre tank. It simply is not big enough, particularly in Australia. Buuuuuuuut I've come around to accepting it. At no time have we run out of fuel. if you take it easy you can squeeze up to 450 klms out of the tank. But I do mean taking it easy. None the less all AT models should be about 26 litres. That would nail it I reckon.

My spokes have rusted as all 16 & 17 model bikes have, so no surprise there. Because the bike is out of Australia, Honda Australia won't warranty the bike. That annoys me off big time. especially after their huge advertising campaign at release date about the bikes world traveling capabilities.

Other than the wheel bearings, the bike has not let me down. The unstressed characteristics help in this regard. I've run on 86 octane with no ill effects. Another argument to keep the engine low stressed and by definition under powered in some people minds. (not mine)

The seat is a shocker, but we had that modified prior to our departure Aug 16.

Those that plan to do a lot of off road, remove the windscreen support bracket and weld it properly then it shouldn't brake. This typically only occurs when you mount a GPS to the cross bracket.

If you are concerned about braking the right rider footrest hanger. Carry a m10 fine x 150mm hex or caphead bolt as an emergency back up. Because we have soft bags fitted to both the eng bars and the rear racks it's very unlikely that we will brake this hanger. I have dropped the bike numerous times and so far so good.

Hmm, I'm sure there are other observations, but that is what springs to mind just for now.

Our blog can be found here Chasing Rainbows, RTW on a H.A.T. | Adventure Rider

Great review of your AT and trip so far! I've now read a bit of your report on ADV Rider, great stuff. Thanks for taking the time to share!. :scooter:

Very surprised your Shinko 805 has done so well. I too heard negatives. So GREAT to find a long lasting tire that works well off road yet survives highway riding. :clap:

I think you guys may keep more moderate speeds even on motorways? I know on long trips I always go slower ... like not over 60 to 65 MPH to preserve rear tire when far from getting another.

If we average 75 to 80 mph, most rear knobbies (TKC, Kenda Big Block, Michelin T63 and others) evaporate quickly doing high speeds.

You were wondering about a good front. One possible could be an odd ball I've found for my DR650. The IRC TR-8. I've tried Heidinau and Mitas, IMO, very untrustworthy on wet paved roads and weird handling depending on what rear tire you pair it with. But last well.

Both TKC and IRC do well on pavement within reason and you can carve the dry corners fairly hard.

Both the TKC and IRC developed "weird" wear patterns at about 6000 miles. But I ride very hard and brake hard on paved roads. So I expect that is why. Gentle riding I'm sure will bring a different result. BTW, the IRC out lasted the TKC and is MUCH cheaper (in USA anyway)

Interesting about repeated rear wheel bearing failures. The Suzuki DR650 has a propensity for this as well ... with disastrous results if you don't catch it early.

The solution that an Aussie guy (BergDonk on ADV Rider) came up with (and it seems to really HELP!) is to maintain fairly FRESH Cush Drive Rubber inserts.

This apparently helps keep everything more in line. When worn, hubb can move some, exerting pressure on wheel and hubb bearings. Just a thought, no idea if it's pertinent to your AT.

On the DR650 the Cush Drive rubbers only last about 10K miles at most. After that you can feel a roughness in drive train (feels like failing clutch basket) ... and of course you're on the road to failed wheel/hubb bearings. They look normal but somehow stop working. I've been through this on my 60K mile DR650.

On the DR650 when the central hubb bearing fails it can take out the entire hubb, leaving it unusable. :( It's only happened to a few owners, and mostly in Oz doing very hard, off road work.

Your videos were scary as Hell on those narrow tracks with 1000 meter drop offs. YIKES! Even worse than Death Road in Bolivia!

Interesting findings regards possible over tightening of triple clamps. I remember from my dirt bike Enduro racing days (AMA Enduro) to be very careful not to CRUSH the forks. They are soft ... and many crush them.

Those Ohlins are beauties. Hope you can get them dialed in for those rugged tracks you seem so fond of. Next up? Ohlins shock?

BTW, IMO, if you eliminate front end dive you may end up with a rather HARSH ride on the rough, bumpy bits. Fork dive is part of reality on big dual sport bikes.

The way to mitigate it is to use rear brake with front brake. (lightly of course) This will really help reduce fork dive. If me, I'd leave the settings plush and on the soft side unless doing ALL tarmac.

Stay safe out there! all the best.
bier

Hi Mollydog, it seems we concur on most things. I thought the Hidenau's were pure evil and yes they have both strange wear patterns and road "manners". I seem to get high milage out of all my tyres. I put that down to a number of things. I neither accelerate nor brake hard and I maintain high pressures most if the time. 32/42 psi. I 've been pleasantly surprised with the Shinko 805, no bad manners at all that I can detect. By front TKC80 now has 18500 klms on it nd it could go some more. But I will change that in Tessalonika in a few days with a Karoo.

BergDonk is indeed the guru of all things DR, he lives just a 1 1/2 up the road from me.

The Cush blocks on the AT seems OK to me, but it is certainly worth keeping an eye on, thanks for the heads up.

The std front end, particularly two up was simply not up to the task. It's all a trade off, but the Ohlins will give better service for sure. None the less I take on board your comments. It's early days yet but I've only wound the dampening up 4 turns out of 16. I'll continue to play around.

Those roads in the video's weren't actually too bad. But "she whom must be obeyed", is getting a little fed up with "shitty goat tracks" (her words)

I'm glad you liked the blog, this year will be mostly asphalt, but a lot more rain I guess.

Recently I read about many cases of AT frames getting rusty...
Some owner considering even replacing whole frame doh

I was very eager to get new AT since some time but I must say I was
slowly but effectively cured from that wish by now :thumbdown:

A relevant and pertinent point for more than one motorcycle manufacturer these days.

Possibly because of "thin" paint, and yet the car manufacturers do not seem to have similar levels of dissatisfaction with this aspect of the finish of vehicles.

Some would say that the usage of water based paints has led to thinner coatings overall. The trade would disagree, but they would say that.

WOW! 18K km is amazing! My TKC did well too, but at round 6K miles
(10K km) the wear pattern started to get weird but that funky tire still handled well. I'm not a fan of Karoo ... but maybe latest ones are better? Been stuck with BMW's guys running Karoo's and quickly running out of tire far away from replacement. :helpsmilie:

Cool, BergDonk may have some ideas on AT bearings.

One "tell tale" note I remember from Berg's writings was a bit of wiggle in the hubb with bike on stand. On DR650 should not be much wiggle at all.

BTW, you can't tell by looking if Cush rubbers are worn. New and Old, to me, look the same ... but somehow swapping in new tightens things up, smooths out the drive line (this on DR650 ... no idea of affect on your AT)

Hope you two get nice weather. The Ohlins will be "The Dog's ... ". I've got an Ohlins shock on my DR650. When the bike goes, I take the shock with me!

Safe going! :D

you can swap the tyre the other way around so it will smooth the pattern out, same happened to mine tkc80. Very long lasting tyres, I did over 20k km and I could keep them longer still.

I just had the chance to ride from Senegal to Europa with 2 AfricaTwins. The old and the very new one http://schoene-motorradtouren.de/?report=senegal

There was never a way we had a lack of horespower. SpeedLimit was 100 km/h, we were on holliday, lots of animales and people on the road and no police was chasing us but the consumtion of petrol was to high. If we would have traveled by car we would have saved a lot.

Adventure starts were the asphalt stops but on gravel or mud you cant even get 50 horsepower on the ground without the wheels spinning. Thats also why traveling makes the tires last much longer. While traveling with luggage you dont exelerate and use your brakes so hard.

For real adventure both AfricaTwins were waaay to heavy. Think of situations were you manover on a crowdet marked place to park in front of a restaurant to be able to watch your stuff while eating or of you try to reach a nice wild camping spot in the evening.

I prefere any rented 4 dollars per day scooter that i use to ride for thousends of kilometers in India or Asia to this. The light and easy to manover 125cc scooters have more adventure riding qualitys as any new "adventure bikes" on the marked and can go 100 km per hour as well but with just 3 liters on 100 km: http://adventure-travel-experience.de/?report=mumbai

My "Lack of Horsepower comment on Africa Twin" relates more to how it stacks up against it's competition ... mainly KTM, and the fact the Honda AT is down 30 to 50 HP vs KTM's top models. (1090, 1190, 1290) For some, this matters.

Totally correct that for 3rd world back country exploration, no one can use 160 HP provided on the KTM 1290 Adventure ... and these big bikes can actually be a hindrance in crowded cities, deep mud or super knarly tracks. But for smooth, modern open roads in USA, EU ... they excel.

Like you, in Asia I got along fine riding 100cc to 125cc rental bikes. In fact, easier to make it through mud on little bike vs. any full size GS, KTM or even a 650 class dual sport like my DR650 or even a XR400 Honda or DRZ400.

My Honda comment might matter to some. Mainly ON Road Riders who rarely leave USA or EU on their bike and ride in groups, riding fast, mainly nice paved roads, mountain passes and such.

It's all good and I currently do similar riding ... but that's not exactly ADV riding or travel, it's just hooning around with your buddies having fun ... which is fine. :D

Some rumors were around about Honda bringing out a smaller, lighter iteration of the Africa Twin. Perhaps using their 500cc Parallel twin or 650? Or? No idea if they will follow up with such a bike.

I think it might out sell the BIG 1000cc Africa Twin, if done well.

KTM are putting A LOT into their new 790. In a year or so we will see the "off road" version of this bike, it's first iteration will be the road going 790 Duke, which should be for sale late this year.

If your travels are mainly wide open USA/Canada and central EU areas, then a bigger, more road oriented bike can work for many. We only need look how popular the R1200GS has been last 10 years and still is! This, a $25,000 usd
motorbike! :innocent:

But this is not because the bike is good its because the Advertising is good (same with Harley). It matches peoples dreams. If someone is wasting his lifetime in an office money is not a problem. These people dream of doing an adventure but are to affraid of actually doing it so they buy the GS and will never find out its actually the wrong bike for a real adventure. To ride to Starbucks and back its doing fine and thats all they do. They will never compare it to a scooter in Thailand. They say its good after just a few Kilometers and dont even want a $25.000 bike to last for 200.000 km http://www.motorradonline.de/dauerte...en.559102.html

http://afrikamotorrad.de/mittel/tourguide_083.jpg

Yes i have been riding the big KTM and was surprised how it feels like my Honda Transalp. Sitting position etc. Only it has 3 times the power and costs 15 times the price. Its fun for sunday riders if you ignore any speedlimit but for everyday use you dont need al this http://afrikamotorrad.de/?report=tourguide

regarding the excessive power - what is laughable they put 160HP on a bike and then have to add riding modes to limit that power in most of the conditions :rofl: Customer actually will never use all these horses anyway, but he pays for it and economy is booming.

Hi Tremens

Buy one and find out first hand IMO
Had my AT DCT now for 36.000 KM.
It's a great bike with very few issues.

https://www.africatwin.org/threads/f...st-paint.1575/

https://uploads.tapatalk-cdn.com/201...f938c72dca.jpg

Quality of the africa twin - Honda CRF1000L Africa Twin Forum

Just checked my bike?
Dam it has the same rust in the same spot??
So what big deal I will cry all night long now and will need to change my bike.
Just checked my friends $4.500.000 Lamborghini Veneno Roadster and shit me found some rust as well.
Wake up it's just a dam bike which can and will rust.

Yes, and by the way, you need to read this .....http://advrider.com/index.php?thread...h-a-t.1172713/

Your experience is certainly a strong endorsement for the goodness of Honda's new Africa Twin ... but ....

Since we all can't possibly have in person experience with every Africa Twin in the world ... READING ... is about the only way we can gather information, get the opinions of other AT owners.

If you have a better idea to get feed back from HUNDREDS of other AT owners,
I'd love to hear it.

The real test is the credibility of those numerous sources. But even I, who have not tracked the AT that closely, have heard about the foot pegs breaking off in a minor fall. There have been a couple threads over on ADV Rider and elsewhere documenting this.

Others who follow those threads closely might know more ... I don't.

So yes, I read about that and several other rider reviews here and there. Hope that doesn't make me look too stupid! :rofl:

Of course we may find stuff that's made up on the forums, or hyperbole ... and under reporting of problems too ... which I've seen BIG TIME on BMW forums. (It's like a religion ... criticism is not ALLOWED! :smartass:

Seems to me the overall experience with the AT is good for most riders ... just a few glitches in an otherwise near perfect machine.

I read all the US and some British bike magazines. I've read/veiwed several good long term reviews, comparos to other bikes ...plus Video reviews on Utube. For the most part ALL GOOD ... and in terms of off road the Honda
has easily vanquished current competition.

Once the new KTM 790 and Yamaha T7 hit the market ... those opinions may change. :innocent:

Ok folks, here's the usual moderator input:

You are welcome to express opinions and offer information relevant to the topic. Forum rules require that you refrain from insulting other members while doing so. Please play by the rules.

(signed)

Dictatorial Moderator

http://www.africatwinforum.com/forum...rica-twin.html
http://www.africatwinforum.com/forum...king-good.html
https://www.africatwin.org/threads/f...st-paint.1575/