Go Back   Horizons Unlimited - The HUBB > Technical, Bike forums > Honda Tech
Honda Tech Honda Tech Forum - For Questions specific and of interest to Honda riders only.
Photo by Daniel Rintz, Himba children, Namibia

The only impossible journey
is the one
you never begin

Photo by Daniel Rintz,
Himba children, Namibia



Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 6 Sep 2005
gwc gwc is offline
Registered Users
New on the HUBB
 
Join Date: Aug 2005
Location: London
Posts: 11
XR 650 L headlight shell/cover ????

Are there any recommendations on headlight shells/covers.

Looking for one that rises high enough to cover GPS and also divert wind off my chest

Similiar to Africa Twins.

[This message has been edited by gwc (edited 06 September 2005).]
Reply With Quote
  #2  
Old 8 Sep 2005
mattmbishop's Avatar
Contributing Member
HUBB regular
 
Join Date: Nov 2004
Location: Galway, Ireland
Posts: 74
I've been using a Givi windshield on mine. It clamps onto the handlebars, making it easy to remove when I take my bike for dedicated dirt trips.

This is something I've been working on recently, it's an alloy light fairing that will replace the existing fairing. The plan is to fit a lid and lock to the back, making a small glovebox. I am not totally taken with the angles on this model though. If you're the jobbing type, I could supply the plans for this.



It's basically an alloy copy of a plastic fairing that I've seen on the net. Not quite sure where you'd find them, but Chris Scott had one on his bike.

Cheers,
Matt

My XR650L site

[This message has been edited by mattmbishop (edited 07 September 2005).]
Reply With Quote
  #3  
Old 9 Sep 2005
BCK_973's Avatar
Registered Users
Veteran HUBBer
 
Join Date: Mar 2005
Location: Buenos Aires,City of good sex,mate and asado!
Posts: 539
Matt
Do you mean aluminum with alloy?
Be carefull with that,remember what happend with the inventor of the Guillotin.
I think this could be done with a strong plexiglass.(for security)
Good luck on your design.
Keep us posted.
I am riding mine without but....
KH
__________________
http://vientoderipio.blogspot.com/
America is a nice continent,not a country.All people who lives in this continent are americans.Discover it in peace!
Reply With Quote
  #4  
Old 31 Oct 2005
Registered Users
New on the HUBB
 
Join Date: Jun 2005
Location: London,United Kingdom
Posts: 3
I've got a XR 650L and am thinking about the same thing.Have a look at this web site www.simpson-detour.co.uk the have twin headlights and surrounds,hope this helps.
Rob
Reply With Quote
  #5  
Old 1 Nov 2005
Contributing Member
HUBB regular
 
Join Date: Jan 2004
Location: Birmingham
Posts: 59
Take a piece of lexan (polycarbonate) and bend using a hot air paint stripper. Then drill holes to fit using existing headlight bolts. Unless you bend the lexan in a completely dry atmosphere, you will get a few bubbles at the bends, but these are not significant.

ps

I'd show you guys a pic, but don't know how to add one. How do I do this?

pps

You can do the same with polypropylene, as I have done. Again, if I could show you a pick then you could see the results of the technique on my XR.


[This message has been edited by Cugel (edited 31 October 2005).]

[This message has been edited by Cugel (edited 31 October 2005).]
Reply With Quote
  #6  
Old 2 Nov 2005
mattmbishop's Avatar
Contributing Member
HUBB regular
 
Join Date: Nov 2004
Location: Galway, Ireland
Posts: 74
I'd be interested to see your Lexan windshield, Cugel.

You can't post a picture to this forum, but you can use html to link to a picture somewhere else on the internet. You'd need webspace somewhere to do this and then just add the html to your post. The code is [img src="http://www.domain.com/image.jpg" /](you need to replace the square brackets with arrow brackets for this to work)

If you can't do this, email the photo to me and I'll post it, matthew(at)sec(dot)co(dot)nz.



[This message has been edited by mattmbishop (edited 01 November 2005).]
Reply With Quote
  #7  
Old 4 Nov 2005
mattmbishop's Avatar
Contributing Member
HUBB regular
 
Join Date: Nov 2004
Location: Galway, Ireland
Posts: 74
Posted on behalf of Cugel:

"The pic with my bike acting as a washing line shows my first attempt at making a tough & light windscreen. I used it last year in Morocco.



I got a sheet of 3mm lexan, marked up the bends I wanted and got to work with a hot air paint stripper. You need a big wooden jawed vise and some thick cloth gloves to make the bends. I used a Black and Decker workmate. Make sure you clean up the jaws or all the muck gets transferred to the plastic. Put the lexan sheet in the vice, with the required bend line just exposed above the wood surface of the workmate. Blast away in a steady sweep along the bend line. The lexan will start to bend by itself due to the temperature gradient from front to back. Keep on heating until its soft and easy to move. You will get some bubbles in the lexan at this point, but these are not too bad. When its soft enough, bend to the required amount and hold until its cooled. Practice on some scrap before you have a go at a big piece. What you end up with is very tough and very safe compared to acrylic. The latter shatters easily - its very brittle. I hit a massive pothole in the Atlas last year. I nearly went over the bars.
I bent the lexan screen through about 70/80 degrees, and it bounced back with just a few stress cracks.

I made a headlight shield using the same technique.

This year I wanted a bigger screen that was tougher, and gave me some shading for the gps and clocks. I bought a sheet of 3mm polypropylene. Same technique, but I noticed that I had to be more careful with the heat gun because of the lower melting point. The lower melting point was very useful, as it meant I could tweak the shape with my gloved hands.

The new shield appears in all the other pics. I built an adjustable mount for it so I could vary the rake. This was made from 3mm alloy.







By the way, if you are feeling keen you can drape-form or vac-form both lexan and polypropylene - however, its going to take longer to make up the kit.

Other points to note:

I wanted to try to keep the airflow laminar where possible, so I built the screen about 1" proud of the original XR screen. Thus a bleed of air anchors the flow for a bit longer at the top of the screen and helps reduce buffet.

The screen is attached to the alloy mount via some rubber nuts. These pop out in a hard crash.

The result:

The new poly screen is good at reducing higher frequency wind noise - its just not there anymore. However, thus means that I'm now more concious of the remaining low frequency buffeting. The latter penetrates earplugs and is a real balls ache. So I'm still not there yet.

What do you guys think of my hibscus stickers?"


Nice bike, and I think the stickers certainly improve the final product.

[This message has been edited by mattmbishop (edited 04 November 2005).]
Reply With Quote
  #8  
Old 5 Nov 2005
Contributing Member
Veteran HUBBer
 
Join Date: Jun 2005
Location: cardigan,wales
Posts: 249
Flower power maaaan,it's the way forward!
By the way,a possible source of free polypropelene is from a builders merchants.Apparently it's used as protection for the large sheets of plasterboard/Celutex/some other board that i can't remember the name of.The 8' - 4' sheet i got my hands on years ago is nearly gone now,so if i find out exactly what it acts as protection for,i'll post here...

------------------
Just going for a short ride on my bike....
__________________
Just going for a short ride on my bike....
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 Registered Users and/or Members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


 
 

Announcements

Thinking about traveling? Not sure about the whole thing? Watch the HU Achievable Dream Video Trailers and then get ALL the information you need to get inspired and learn how to travel anywhere in the world!

Have YOU ever wondered who has ridden around the world? We did too - and now here's the list of Circumnavigators!
Check it out now
, and add your information if we didn't find you.

Next HU Eventscalendar

HU Event and other updates on the HUBB Forum "Traveller's Advisories" thread.
ALL Dates subject to change.

2024:

Add yourself to the Updates List for each event!

Questions about an event? Ask here

HUBBUK: info

See all event details

 
World's most listened to Adventure Motorbike Show!
Check the RAW segments; Grant, your HU host is on every month!
Episodes below to listen to while you, err, pretend to do something or other...

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

"Ultimate global guide for red-blooded bikers planning overseas exploration. Covers choice & preparation of best bike, shipping overseas, baggage design, riding techniques, travel health, visas, documentation, safety and useful addresses." Recommended. (Grant)



Ripcord Rescue Travel Insurance.

Ripcord Rescue Travel Insurance™ combines into a single integrated program the best evacuation and rescue with the premier travel insurance coverages designed for adventurers.

Led by special operations veterans, Stanford Medicine affiliated physicians, paramedics and other travel experts, Ripcord is perfect for adventure seekers, climbers, skiers, sports enthusiasts, hunters, international travelers, humanitarian efforts, expeditions and more.

Ripcord travel protection is now available for ALL nationalities, and travel is covered on motorcycles of all sizes!


 

What others say about HU...

"This site is the BIBLE for international bike travelers." Greg, Australia

"Thank you! The web site, The travels, The insight, The inspiration, Everything, just thanks." Colin, UK

"My friend and I are planning a trip from Singapore to England... We found (the HU) site invaluable as an aid to planning and have based a lot of our purchases (bikes, riding gear, etc.) on what we have learned from this site." Phil, Australia

"I for one always had an adventurous spirit, but you and Susan lit the fire for my trip and I'll be forever grateful for what you two do to inspire others to just do it." Brent, USA

"Your website is a mecca of valuable information and the (video) series is informative, entertaining, and inspiring!" Jennifer, Canada

"Your worldwide organisation and events are the Go To places to for all serious touring and aspiring touring bikers." Trevor, South Africa

"This is the answer to all my questions." Haydn, Australia

"Keep going the excellent work you are doing for Horizons Unlimited - I love it!" Thomas, Germany

Lots more comments here!



Five books by Graham Field!

Diaries of a compulsive traveller
by Graham Field
Book, eBook, Audiobook

"A compelling, honest, inspiring and entertaining writing style with a built-in feel-good factor" Get them NOW from the authors' website and Amazon.com, Amazon.ca, Amazon.co.uk.



Back Road Map Books and Backroad GPS Maps for all of Canada - a must have!

New to Horizons Unlimited?

New to motorcycle travelling? New to the HU site? Confused? Too many options? It's really very simple - just 4 easy steps!

Horizons Unlimited was founded in 1997 by Grant and Susan Johnson following their journey around the world on a BMW R80G/S.

Susan and Grant Johnson Read more about Grant & Susan's story

Membership - help keep us going!

Horizons Unlimited is not a big multi-national company, just two people who love motorcycle travel and have grown what started as a hobby in 1997 into a full time job (usually 8-10 hours per day and 7 days a week) and a labour of love. To keep it going and a roof over our heads, we run events all over the world with the help of volunteers; we sell inspirational and informative DVDs; we have a few selected advertisers; and we make a small amount from memberships.

You don't have to be a Member to come to an HU meeting, access the website, or ask questions on the HUBB. What you get for your membership contribution is our sincere gratitude, good karma and knowing that you're helping to keep the motorcycle travel dream alive. Contributing Members and Gold Members do get additional features on the HUBB. Here's a list of all the Member benefits on the HUBB.




All times are GMT +1. The time now is 00:13.