Go Back   Horizons Unlimited - The HUBB > Technical, Bike forums > Yamaha Tech
Yamaha Tech Originally the Yamaha XT600 Tech Forum, due to demand it now includes all Yamaha's technical / mechanical / repair / preparation questions.
Photo by Daniel Rintz, Himba children, Namibia

The only impossible journey
is the one
you never begin

Photo by Daniel Rintz,
Himba children, Namibia



Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 28 Sep 2013
Registered Users
Veteran HUBBer
 
Join Date: Sep 2012
Location: Middle USA
Posts: 349
Zeeltronic PCDI-XT CDI module

I just installed my new Zeeltronic CDI for the older CDI version XT's. Installation was very straight forward since I had already programmed my advance curve. The unit came programmed but I wanted to faithfully follow the curve in the manual so altered the setting just a bit. 7000 RPM limiter was already set and can be removed if desired. the 250 Minimum RPM for Kickback protection was already set and I left that as well.

The programmable CDI comes with the Stator Plug and the 2 bullet wires going to the Stator already installed. The other, shorter wire loom has the Orange wire female bullet connector for direct plug in to the coil. The other 2 wires is for the Kill function and is Black/white stripe and ground is a solid black and have the correct bullet connectors installed.

The models of XT's without the kickstand switch will plug in directly and only need the 8 wires provided. If your bike has the Kickstand switch there will be a plug to route the neutral light wire through the CDI and an input for the Sidestand switch.

By now many have already bypassed the faulty sidestand switch so it is really not necessary. If this is true for you then you need the basic model and currently the only model ready to purchase. My 86 has the side standstand switch and it was bypassed. I removed the plug close to the CDI location, added the appropriate bullet connectors to match the CDI and plugged it in. Part of the process is to connect the blue wire from the neutral switch to the sky blue wire going to the neutral light. Just plug them together or solder and tape them.

OK, so how does it run??? My seat dyno wants to say much better, but I don't know yet to be honest. The XT has so much power anyway at 1200 feet AMSL it just pulls your arms very hard. Starting is a 1 kick affair if warm. If sitting for a day or two or more, I learned here or another forum to do the following: gas on, key off, no throttle, Kick 3 or 4 times ( I do 3 times) fairly easily, then key on, kick slowly until the compression release clicks, release kicker then kick a full kick and 9 times out of 10 it will start right up. This was true using the Hyperpak unit as well.

As I was enjoying the ride, I reved it till the RPM limit hit. Engine just kind of fluttered and would rev NO higher. I grabbed the next gear and off I went.

There is another loom for optional use, one wire is for a shift light, one for driving an electronic tach and one to go to +12 volts if you want to use the handheld programmer with the engine off. If you use the USB cable and a Laptop, the USB port will power the unit for programming. You most likely will not need the programmer, but I like to "Know" how things are programmed. One last wire is for switching between two programmed advance curves by either grounding or un-grounding the wire via a handlebar mounted switch. You can make your own or buy one from Zeeltronics. His web site has various plugs and pins for crimping your own. Go to www.zeeltronics.com. This unit is not listed yet but an email to Borut will bring you a response to your questions.

I will continue to ride and evaluate this unit and report honestly. So far I am happy.

Steve
Reply With Quote
  #2  
Old 28 Sep 2013
xtrock's Avatar
Registered Users
Veteran HUBBer
 
Join Date: May 2013
Location: Norway
Posts: 1,325
ZEELTRONIC - HOME
Reply With Quote
  #3  
Old 28 Sep 2013
Registered Users
Veteran HUBBer
 
Join Date: Sep 2012
Location: Middle USA
Posts: 349
I would like to see a comparison as well, my butt dyno is not as reliable as a real dyno and I don't have a working stock unit. I don't have ready access to a dyno either. I may take my 2 oems apart and resolder some connections to see if that could be the problem. I am an Electronics tech so have the skill but just wasn't sure if the whole board was potted or just a sealed case. I can see inside the Hyperpak since I removed it. The case is just painted black and some paint got scratched of in the install/removal process. It is not potted. I don't plan to open it since it is only a month old and works fine. I'll have a spare to carry along on trips.
Reply With Quote
  #4  
Old 29 Sep 2013
Registered Users
Veteran HUBBer
 
Join Date: Sep 2012
Location: Middle USA
Posts: 349
Zeeltronic update

My son just came back from riding my XT600 with the Zeeltronic Ignition. He said it pulled much harder from idle on up. I felt it did too, but wasn't sure. I will ride it more then switch the Hyperpak back in and see if I can tell any difference.

One thing I do know is that the advance curve will be faithfully reproduced since the PCDI-XT is microprocessor controlled and is not dependent on an analog circuit for the advance. I set the advance points to match my 86 factory manual as close as I could interpret it.

Once I know for sure, I'll report honestly what we feel the difference is, if any.

More riding and my XT is pulling so hard. A few more days and I'll swap in the Hyperpak CDI. If there is a difference I should notice right away...
__________________
'84 XT600 is now bored to 2nd oversize and new OEM pistons and rings installed. No more smoking.

Last edited by steveloomis; 2 Oct 2013 at 01:41. Reason: Update
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 Registered Users and/or Members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
New Style CDI steveloomis Yamaha Tech 4 24 Oct 2013 16:00
Moved post: Honda Falcon NX4 CDI hasen Honda Tech 0 25 Sep 2013 10:01
NX650/XR650 CDI Woes still.southern Honda Tech 3 14 Dec 2012 22:10
Tt600r cdi Iasonas Yamaha Tech 4 21 Dec 2011 20:29
Honda CD250u CDi Unit nickandrabbit Honda Tech 2 11 Dec 2011 22:54

 
 

Announcements

Thinking about traveling? Not sure about the whole thing? Watch the HU Achievable Dream Video Trailers and then get ALL the information you need to get inspired and learn how to travel anywhere in the world!

Have YOU ever wondered who has ridden around the world? We did too - and now here's the list of Circumnavigators!
Check it out now
, and add your information if we didn't find you.

Next HU Eventscalendar

HU Event and other updates on the HUBB Forum "Traveller's Advisories" thread.
ALL Dates subject to change.

2024:

Add yourself to the Updates List for each event!

Questions about an event? Ask here

HUBBUK: info

See all event details

 
World's most listened to Adventure Motorbike Show!
Check the RAW segments; Grant, your HU host is on every month!
Episodes below to listen to while you, err, pretend to do something or other...

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

"Ultimate global guide for red-blooded bikers planning overseas exploration. Covers choice & preparation of best bike, shipping overseas, baggage design, riding techniques, travel health, visas, documentation, safety and useful addresses." Recommended. (Grant)



Ripcord Rescue Travel Insurance.

Ripcord Rescue Travel Insurance™ combines into a single integrated program the best evacuation and rescue with the premier travel insurance coverages designed for adventurers.

Led by special operations veterans, Stanford Medicine affiliated physicians, paramedics and other travel experts, Ripcord is perfect for adventure seekers, climbers, skiers, sports enthusiasts, hunters, international travelers, humanitarian efforts, expeditions and more.

Ripcord travel protection is now available for ALL nationalities, and travel is covered on motorcycles of all sizes!


 

What others say about HU...

"This site is the BIBLE for international bike travelers." Greg, Australia

"Thank you! The web site, The travels, The insight, The inspiration, Everything, just thanks." Colin, UK

"My friend and I are planning a trip from Singapore to England... We found (the HU) site invaluable as an aid to planning and have based a lot of our purchases (bikes, riding gear, etc.) on what we have learned from this site." Phil, Australia

"I for one always had an adventurous spirit, but you and Susan lit the fire for my trip and I'll be forever grateful for what you two do to inspire others to just do it." Brent, USA

"Your website is a mecca of valuable information and the (video) series is informative, entertaining, and inspiring!" Jennifer, Canada

"Your worldwide organisation and events are the Go To places to for all serious touring and aspiring touring bikers." Trevor, South Africa

"This is the answer to all my questions." Haydn, Australia

"Keep going the excellent work you are doing for Horizons Unlimited - I love it!" Thomas, Germany

Lots more comments here!



Five books by Graham Field!

Diaries of a compulsive traveller
by Graham Field
Book, eBook, Audiobook

"A compelling, honest, inspiring and entertaining writing style with a built-in feel-good factor" Get them NOW from the authors' website and Amazon.com, Amazon.ca, Amazon.co.uk.



Back Road Map Books and Backroad GPS Maps for all of Canada - a must have!

New to Horizons Unlimited?

New to motorcycle travelling? New to the HU site? Confused? Too many options? It's really very simple - just 4 easy steps!

Horizons Unlimited was founded in 1997 by Grant and Susan Johnson following their journey around the world on a BMW R80G/S.

Susan and Grant Johnson Read more about Grant & Susan's story

Membership - help keep us going!

Horizons Unlimited is not a big multi-national company, just two people who love motorcycle travel and have grown what started as a hobby in 1997 into a full time job (usually 8-10 hours per day and 7 days a week) and a labour of love. To keep it going and a roof over our heads, we run events all over the world with the help of volunteers; we sell inspirational and informative DVDs; we have a few selected advertisers; and we make a small amount from memberships.

You don't have to be a Member to come to an HU meeting, access the website, or ask questions on the HUBB. What you get for your membership contribution is our sincere gratitude, good karma and knowing that you're helping to keep the motorcycle travel dream alive. Contributing Members and Gold Members do get additional features on the HUBB. Here's a list of all the Member benefits on the HUBB.




All times are GMT +1. The time now is 01:09.