Go Back   Horizons Unlimited - The HUBB > Technical, Bike forums > Yamaha Tech
Yamaha Tech Originally the Yamaha XT600 Tech Forum, due to demand it now includes all Yamaha's technical / mechanical / repair / preparation questions.
Photo by Daniel Rintz, Himba children, Namibia

The only impossible journey
is the one
you never begin

Photo by Daniel Rintz,
Himba children, Namibia



Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 1 Aug 2012
Registered Users
HUBB regular
 
Join Date: Jul 2011
Posts: 27
XT600e Rotted Downpipes

The downpipes which i've just removed off my xt600e were rotted into place and have snapped leaving a sliver of metal sticking out of the exhaust ports. Not being the best mechanic around i can't tell whether the shoulder of the new downpipes i'll be getting will slide into the port or just be a flush fit. Trying to avoid an engine out job if i'm honest to get the residue of rusted metal out!
Any advice appreciated!
Reply With Quote
  #2  
Old 1 Aug 2012
Registered Users
New on the HUBB
 
Join Date: Feb 2011
Location: Northern Scotland
Posts: 16
Smile

Post some pics.
Reply With Quote
  #3  
Old 2 Aug 2012
Registered Users
HUBB regular
 
Join Date: Dec 2011
Location: scotland
Posts: 33
Hi i have just done this job you are better to get the engine out and on the bench it took about 3 hours with lots of heat to get them out

your new ones slide into the exhaust port for about an inch

cheers

Dave
Reply With Quote
  #4  
Old 2 Aug 2012
Registered Users
HUBB regular
 
Join Date: Jul 2011
Posts: 27
Thanks for that, that's all i need to know!
Reply With Quote
  #5  
Old 3 Aug 2012
R.I.P. 25 November 2021
Veteran HUBBer
 
Join Date: Feb 2010
Posts: 688
If there is any left sticking out use a small chisel (not wood one) and bash it inwards so it folds inwards on itself, or use a decent flat HD screwdriver.

Also make sure you get all of the copper gasket out before fitting your new ones or it will leak if you put new gasket over old flattened ones.

Mezo.
Reply With Quote
  #6  
Old 4 Aug 2012
BlackDogZulu's Avatar
Registered Users
Veteran HUBBer
 
Join Date: Oct 2008
Location: West Wales, UK
Posts: 753
Same happened to me, and I totally failed to get them out. I took the head off and had it on the bench. Chisels, dremel, blowtorch, 2lb sledge, nothing would shift it. I ended up taking it to a mechanic as a last resort, something I haven't had to do in years. It took him about an hour with an oxy torch, basically burned them out of there.

Getting the new ones in is easy. They are a nice sliding fit in the ports. Get the old copper gaskets out and clean the mating surfaces for a good seal. If it's scabby in there, the gaskets may not be obvious, but a chisel or big screwdriver will help. They don't always want to come out!

I put new studs and bolts in at the same time, and the Motad downpipes are great. They were shiny for about ten minutes before they began to go a straw colour, and by now they are dark coppery brown. But no rust!
__________________
2006 XT660R daily ride, 1994 XT600E about to be reborn, Blog: http://goingfastgettingnowhere.blogspot.com/
Reply With Quote
  #7  
Old 4 Aug 2012
Registered Users
HUBB regular
 
Join Date: Jul 2011
Posts: 27
Thanks for all your advice, i'm going to try tomorrow and see what happens!
Reply With Quote
  #8  
Old 4 Aug 2012
*Touring Ted*'s Avatar
Contributing Member
Veteran HUBBer
 
Join Date: Jul 2005
Location: Wirral, England.
Posts: 5,654
Use a generous amount of copper slip on and around the exhaust gaskets and also on the exhaust studs when installing the new ones.

This will considerably help to prevent this happening again in the future.

If I was keeping my xt600 bike a long time I would of probably drilled and tapped out the exhaust studs to an M8 as the current M6 cheese bolts are a joke.

__________________
Did some trips.
Rode some bikes.
Fix them for a living.
Can't say anymore.
Reply With Quote
  #9  
Old 5 Aug 2012
Registered Users
Veteran HUBBer
 
Join Date: May 2008
Location: Glasgow
Posts: 296
Hi, I decided to overhaul my XT600E and have hit the same problem, sawed the down pipes off and now need to take out the engine to somehow remove the engine end of the exhaust. Fitting new rings and valve stem seals, anything else I should do whith the engine while it's out. Andy
Reply With Quote
  #10  
Old 7 Aug 2012
R.I.P. 25 November 2021
Veteran HUBBer
 
Join Date: Feb 2010
Posts: 688
I don't think you need to take the engine out? not 100% on a 600E though? with the older bikes you can tilt the engine forward by removing the front bolts & leaving the main bolt that goes through the swingarm.

Mezo.
Reply With Quote
  #11  
Old 7 Aug 2012
BlackDogZulu's Avatar
Registered Users
Veteran HUBBer
 
Join Date: Oct 2008
Location: West Wales, UK
Posts: 753
On mine (3TB, 1994) I was able to take the head off without moving the engine. It needs a bit of wiggling to get the cam covers past the frame, but it's quite possible. Obviously, tank, coil etc need to be removed first.
__________________
2006 XT660R daily ride, 1994 XT600E about to be reborn, Blog: http://goingfastgettingnowhere.blogspot.com/
Reply With Quote
  #12  
Old 7 Aug 2012
bacardi23's Avatar
Registered Users
Veteran HUBBer
 
Join Date: Sep 2007
Location: XXX<-Portugal->Azores->Santa Maria (island)
Posts: 1,544
Don't you have a gear puller? or get a damn file , put a groove on the seal and pull it out... use vice grip pliers...
Reply With Quote
  #13  
Old 7 Aug 2012
R.I.P. 25 November 2021
Veteran HUBBer
 
Join Date: Feb 2010
Posts: 688
Or use a carbide burr (ball shape) thats how we used to remove valve seats, cut a slot & then fold the seat inwards & out she popped.



Mezo.
Reply With Quote
  #14  
Old 8 Aug 2012
BlackDogZulu's Avatar
Registered Users
Veteran HUBBer
 
Join Date: Oct 2008
Location: West Wales, UK
Posts: 753
Quote:
Originally Posted by bacardi23 View Post
Don't you have a gear puller? or get a damn file , put a groove on the seal and pull it out... use vice grip pliers...
I tried those. It's not just the seal. On mine (and I think on the OP's) it is the exhaust pipe boss that is stuck. You can't cut a slot in it without damaging the head casting around it. And it's too small to get a gear puller inside (at least, none of mine would fit in there). Once the boss is out, the gasket is easy. But those exhaust bosses are big solid things, and corrode into the head very effectively.

I gave it a day and a half on the bench with every tool I possess, and I had to give in eventually.
__________________
2006 XT660R daily ride, 1994 XT600E about to be reborn, Blog: http://goingfastgettingnowhere.blogspot.com/
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 Registered Users and/or Members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
XT600E v Honda Dominator - vibration? Jethro Which Bike? 22 25 Nov 2012 05:46
97' XT600E start failing / starting circuit cutoff relay p/n ? jamesahkXT600e Yamaha Tech 1 9 Jun 2012 02:43
XT600e Valve Stem Seals??? RCerrie Yamaha Tech 7 23 Jan 2012 23:41
XT600E - low top speed question?? boduzafa Yamaha Tech 1 10 Nov 2011 21:47

 
 

Announcements

Thinking about traveling? Not sure about the whole thing? Watch the HU Achievable Dream Video Trailers and then get ALL the information you need to get inspired and learn how to travel anywhere in the world!

Have YOU ever wondered who has ridden around the world? We did too - and now here's the list of Circumnavigators!
Check it out now
, and add your information if we didn't find you.

Next HU Eventscalendar

HU Event and other updates on the HUBB Forum "Traveller's Advisories" thread.
ALL Dates subject to change.

2024:

Add yourself to the Updates List for each event!

Questions about an event? Ask here

HUBBUK: info

See all event details

 
World's most listened to Adventure Motorbike Show!
Check the RAW segments; Grant, your HU host is on every month!
Episodes below to listen to while you, err, pretend to do something or other...

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

"Ultimate global guide for red-blooded bikers planning overseas exploration. Covers choice & preparation of best bike, shipping overseas, baggage design, riding techniques, travel health, visas, documentation, safety and useful addresses." Recommended. (Grant)



Ripcord Rescue Travel Insurance.

Ripcord Rescue Travel Insurance™ combines into a single integrated program the best evacuation and rescue with the premier travel insurance coverages designed for adventurers.

Led by special operations veterans, Stanford Medicine affiliated physicians, paramedics and other travel experts, Ripcord is perfect for adventure seekers, climbers, skiers, sports enthusiasts, hunters, international travelers, humanitarian efforts, expeditions and more.

Ripcord travel protection is now available for ALL nationalities, and travel is covered on motorcycles of all sizes!


 

What others say about HU...

"This site is the BIBLE for international bike travelers." Greg, Australia

"Thank you! The web site, The travels, The insight, The inspiration, Everything, just thanks." Colin, UK

"My friend and I are planning a trip from Singapore to England... We found (the HU) site invaluable as an aid to planning and have based a lot of our purchases (bikes, riding gear, etc.) on what we have learned from this site." Phil, Australia

"I for one always had an adventurous spirit, but you and Susan lit the fire for my trip and I'll be forever grateful for what you two do to inspire others to just do it." Brent, USA

"Your website is a mecca of valuable information and the (video) series is informative, entertaining, and inspiring!" Jennifer, Canada

"Your worldwide organisation and events are the Go To places to for all serious touring and aspiring touring bikers." Trevor, South Africa

"This is the answer to all my questions." Haydn, Australia

"Keep going the excellent work you are doing for Horizons Unlimited - I love it!" Thomas, Germany

Lots more comments here!



Five books by Graham Field!

Diaries of a compulsive traveller
by Graham Field
Book, eBook, Audiobook

"A compelling, honest, inspiring and entertaining writing style with a built-in feel-good factor" Get them NOW from the authors' website and Amazon.com, Amazon.ca, Amazon.co.uk.



Back Road Map Books and Backroad GPS Maps for all of Canada - a must have!

New to Horizons Unlimited?

New to motorcycle travelling? New to the HU site? Confused? Too many options? It's really very simple - just 4 easy steps!

Horizons Unlimited was founded in 1997 by Grant and Susan Johnson following their journey around the world on a BMW R80G/S.

Susan and Grant Johnson Read more about Grant & Susan's story

Membership - help keep us going!

Horizons Unlimited is not a big multi-national company, just two people who love motorcycle travel and have grown what started as a hobby in 1997 into a full time job (usually 8-10 hours per day and 7 days a week) and a labour of love. To keep it going and a roof over our heads, we run events all over the world with the help of volunteers; we sell inspirational and informative DVDs; we have a few selected advertisers; and we make a small amount from memberships.

You don't have to be a Member to come to an HU meeting, access the website, or ask questions on the HUBB. What you get for your membership contribution is our sincere gratitude, good karma and knowing that you're helping to keep the motorcycle travel dream alive. Contributing Members and Gold Members do get additional features on the HUBB. Here's a list of all the Member benefits on the HUBB.




All times are GMT +1. The time now is 14:10.