Go Back   Horizons Unlimited - The HUBB > Technical, Bike forums > Yamaha Tech
Yamaha Tech Originally the Yamaha XT600 Tech Forum, due to demand it now includes all Yamaha's technical / mechanical / repair / preparation questions.
Photo by Daniel Rintz, Himba children, Namibia

The only impossible journey
is the one
you never begin

Photo by Daniel Rintz,
Himba children, Namibia



Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 22 May 2007
*Touring Ted*'s Avatar
Contributing Member
Veteran HUBBer
 
Join Date: Jul 2005
Location: Wirral, England.
Posts: 5,654
XT600E on the motorway/highway !

Just done 5 miles down the motorway at 70mph..

This bike is not made for it. It DEFFO needs a screen being so tall and it was struggled to get anywhere near 75mph.

Still, i didnt get her to mile munch boring highways so what the hell, i still lover her.
__________________
Did some trips.
Rode some bikes.
Fix them for a living.
Can't say anymore.
Reply With Quote
  #2  
Old 22 May 2007
cozcan's Avatar
Registered Users
Veteran HUBBer
 
Join Date: Oct 2005
Location: Izmir, Turkey
Posts: 101
Jeq

C'mon Ted!

It is not a Hayabusa, YZF, CBR, Ninja type of a motorcycle that you are to hit mphs on highways. I did complete my JEQ (Japanese Enduro Quartet) last week with a klr and I still am missing my 94 XT that I rode for the last couple of years.

The trick is even enjoy highways that these mules do not seem to cope well especially under winds. Slow down and enjoy what the others are missing while going like hell. There is one highway that I ride often and I see wild falcons and eagles on poles and a very strong smell of wild thyme at a very specific point that noone seems to have noticed for years.
Reply With Quote
  #3  
Old 22 May 2007
Registered Users
HUBB regular
 
Join Date: Apr 2007
Location: Spain
Posts: 59
Ted.

I cruse regularly at 110/120 km/h (or about 75 mph) fully loaded and she does appear to mind with only 4k 4.5k rpm on the clock.

However, I must agree with the pervious post, slow down and enjoy, afterall it is an adventure your after not a trip to work. Even the most boring highways always have something to offer the rider to look at.

Back off the gas and enjoy the journey. Believe me it is worth it.
__________________
http://www.moto-andalucia.com
Reply With Quote
  #4  
Old 22 May 2007
*Touring Ted*'s Avatar
Contributing Member
Veteran HUBBer
 
Join Date: Jul 2005
Location: Wirral, England.
Posts: 5,654
oooh I aint complaining !! Just my first bit of serious highway riding on the XT

I wasnt expecting so much wind blast and thought she would cruise happier at 75mph than she did.

The revs were higher than I liked for the speeds so im thinking of lowering the gearing by a couple of teeth at the rear.
__________________
Did some trips.
Rode some bikes.
Fix them for a living.
Can't say anymore.

Last edited by *Touring Ted*; 22 May 2007 at 11:19.
Reply With Quote
  #5  
Old 22 May 2007
Matt Cartney's Avatar
Contributing Member
Veteran HUBBer
 
Join Date: Feb 2004
Location: Edinburgh, Lothian, Scotland
Posts: 1,350
Hi Ted,

I know what you mean! Sans screen it's a rough ride at seventy, although I find if I slide back on the seat (about halway between normal and pillion postion) it brings me down to a point where it isn't nearly so tiring.
With my home made screen I could hammer along highways at 80mph.

I agree with you about the gearing, I think if I was planning a lot of m-way riding I'd adjust it. Normally I ride at 70mph on the nose.

Matt
__________________
http://adventure-writing.blogspot.com

http://scotlandnepal.blogspot.com/

*Disclaimer* - I am not saying my bike is better than your bike. I am not saying my way is better than your way. I am not mocking your religion/politics/other belief system. When reading my post imagine me sitting behind a frothing pint of ale, smiling and offering you a bag of peanuts. This is the sentiment in which my post is made. Please accept it as such!
Reply With Quote
  #6  
Old 22 May 2007
*Touring Ted*'s Avatar
Contributing Member
Veteran HUBBer
 
Join Date: Jul 2005
Location: Wirral, England.
Posts: 5,654
Quote:
Originally Posted by Matt Cartney View Post
Hi Ted,

I know what you mean! Sans screen it's a rough ride at seventy, although I find if I slide back on the seat (about halway between normal and pillion postion) it brings me down to a point where it isn't nearly so tiring.
With my home made screen I could hammer along highways at 80mph.

I agree with you about the gearing, I think if I was planning a lot of m-way riding I'd adjust it. Normally I ride at 70mph on the nose.

Matt
Yup..I have a screen just not fitted it yet.

Im happy to cruise at 60-70mph but there are times when motorways cant be avoided and being in the caravan lane isnt very appealing.

ed
__________________
Did some trips.
Rode some bikes.
Fix them for a living.
Can't say anymore.
Reply With Quote
  #7  
Old 22 May 2007
Matt Cartney's Avatar
Contributing Member
Veteran HUBBer
 
Join Date: Feb 2004
Location: Edinburgh, Lothian, Scotland
Posts: 1,350
True!

Ted, I got my bash plate off Dave Lambeth the other day. It's real nice, looks extremely tough. Hopefully will get it fitted this weekend. Thanks for the tip!

Matt
__________________
http://adventure-writing.blogspot.com

http://scotlandnepal.blogspot.com/

*Disclaimer* - I am not saying my bike is better than your bike. I am not saying my way is better than your way. I am not mocking your religion/politics/other belief system. When reading my post imagine me sitting behind a frothing pint of ale, smiling and offering you a bag of peanuts. This is the sentiment in which my post is made. Please accept it as such!
Reply With Quote
  #8  
Old 22 May 2007
*Touring Ted*'s Avatar
Contributing Member
Veteran HUBBer
 
Join Date: Jul 2005
Location: Wirral, England.
Posts: 5,654
Quote:
Originally Posted by Matt Cartney View Post
True!

Ted, I got my bash plate off Dave Lambeth the other day. It's real nice, looks extremely tough. Hopefully will get it fitted this weekend. Thanks for the tip!

Matt
Are you going to drill to M8 ??

Have you drilled and tapped metal before ??
__________________
Did some trips.
Rode some bikes.
Fix them for a living.
Can't say anymore.
Reply With Quote
  #9  
Old 22 May 2007
Registered Users
HUBB regular
 
Join Date: Apr 2007
Location: Spain
Posts: 59
Motorway Driving

Ted,

I think there are two options to solve this problem.

First - avoid the motorways. I did this last year - with help from my trusty TomTom Rider - through England, France and Spain - saw so much more and made the trip.

Second - accept the Carvan lane. Painful at time I know, but in my experience its only really bad in the UK. There appears to much less traffic else where.

Just an thought, but the XT doesn't really like 'plugging' around below 3000 rpm, which I also think hammers the gearbox and chain a bit too much for my liking. Which is why I haven't altered the gearing; I altered my routes and riding style to suit. For me this has been a big plus point.
__________________
http://www.moto-andalucia.com
Reply With Quote
  #10  
Old 22 May 2007
Matt Cartney's Avatar
Contributing Member
Veteran HUBBer
 
Join Date: Feb 2004
Location: Edinburgh, Lothian, Scotland
Posts: 1,350
Quote:
Originally Posted by tedmagnum View Post
Are you going to drill to M8 ??

Have you drilled and tapped metal before ??
Hi Ted,

Yes, the M8 bolts definately make sense. I was a cycle (push-bikes) mechanic back in the day and have done some drilling/tapping but not much.

I was going to go out and get the taps and the drill bit (6.8mm I think?) this weekend. From memory you get three taps of increasing 'bite' and use them one at a time till you have your thread cut. I was going to drill out the current hole free-hand with a power drill.

Any tips gratefully recieved.

Matt
__________________
http://adventure-writing.blogspot.com

http://scotlandnepal.blogspot.com/

*Disclaimer* - I am not saying my bike is better than your bike. I am not saying my way is better than your way. I am not mocking your religion/politics/other belief system. When reading my post imagine me sitting behind a frothing pint of ale, smiling and offering you a bag of peanuts. This is the sentiment in which my post is made. Please accept it as such!
Reply With Quote
  #11  
Old 22 May 2007
*Touring Ted*'s Avatar
Contributing Member
Veteran HUBBer
 
Join Date: Jul 2005
Location: Wirral, England.
Posts: 5,654
Quote:
Originally Posted by Matt Cartney View Post
Hi Ted,

Yes, the M8 bolts definately make sense. I was a cycle (push-bikes) mechanic back in the day and have done some drilling/tapping but not much.

I was going to go out and get the taps and the drill bit (6.8mm I think?) this weekend. From memory you get three taps of increasing 'bite' and use them one at a time till you have your thread cut. I was going to drill out the current hole free-hand with a power drill.

Any tips gratefully recieved.

Matt

yo matt

well ordinarily you would use 6.8 but I found that it was too big for a pistol drill. I drilled one hole 6.8 and the tap went through TOO easily and its not the best grip on the bolt now. Still, its holding strong.

Get a couple of 6.5 HSS drill bits. Dont get cheap shit either.

Just drill straight through. On the front mountings, the oil pipe could get damaged so slide something behind the hole to protect it.

you need a M8 1.25 tap. That will go straight into the 6.5mm hole

I found the casing gets in the way so I bought a tap extender off ebay.

eBay.co.uk: Ratchet tap wrench holder long reach (item 170095059822 end time 25-Mar-07 13:12:38 BST)

Just wind the tap straight into the hole with a some oil.


The holes on the bottom of the bike were a pain as my drill was too long so had to borrow a friends smaller one.

If you have any other quieres, you can MSN me: tedmagnum(at)hotmail.com
__________________
Did some trips.
Rode some bikes.
Fix them for a living.
Can't say anymore.
Reply With Quote
  #12  
Old 22 May 2007
Registered Users
New on the HUBB
 
Join Date: Feb 2007
Location: Greece
Posts: 17
So True,this bike just isnt up to the job to ride in any highway.
Even 800cc daewoo matiz's give it a hard time..
I only got out once for a 150 mile ride and sworn never to do it again
unless its a matter of life and death.
My first thought was the wind is to blame,so get a windshield .
my second thought (on the way back) was that even with a windshield
the engine's power band/gearing wont let it cruise at 140km/h any other
bike likes to cruise at.I guess that's where a sixth gear and 3-4hp would come handy..
Reply With Quote
  #13  
Old 23 May 2007
cozcan's Avatar
Registered Users
Veteran HUBBer
 
Join Date: Oct 2005
Location: Izmir, Turkey
Posts: 101
Smile

Think the other way around.

Highways/motorways are not well designed means of travelling even sometimes by cars. We are trying to cope with something very badly designed and thinking that it is the deficiency of our motorcycles.

There's nothing wrong with our motorcycles. Modify highways/motorways.
Reply With Quote
  #14  
Old 23 May 2007
Shells's Avatar
Contributing Member
Veteran HUBBer
 
Join Date: Feb 2005
Location: Travelling in Australia
Posts: 175
Highway riding

Hey Ted,

The XT isn't alone in being one down to highways. Highways are a necessary evil, and on my Dommie (also sans screen), they are character building stuff

There are positives though:
* You can't go fast. Even if you duck down as low as possible and pray for a tail wind, you might just see 80mph. That's all good though!! I pootle along at 65/70 and feel better that if I fell off, the outcome would be better than if I was hooning around at 90/100.
(but I tend not to think about that one too many times LOL)

* the wind makes you use your stomach and arm muscles
after a few days travelling you will notice the difference! (bye bye bingo wings, hello 6 pack! )

* lastly, try to ride behind someone else who doesn't have a screen - that way you get to see them being buffetted arond and their lollipop helmet heads blowing from side to side and the amusement value should help.

Slow and steady. Much better than speedy!
__________________
If you don't have bugs in your teeth, you haven't been grinning enough!
Reply With Quote
  #15  
Old 5 Aug 2007
Registered Users
HUBB regular
 
Join Date: Aug 2006
Location: Chichester
Posts: 51
Whats wrong with you guys??? I did 250 miles on my 2003 XT today half of that at 75-80mph on the motorway. I must admit I am short (5ft6) and don't really have a neck (20 years playing rugby). My Xt loved it at around 4.5k = 75mph. The only problem I have is the seat after about 70 miles I have to stop and have a walk. I have seen lots of you guys have done all kinds of mods but I would like to keep the bike looking the same eg no sheep skin rugs!!!! Any ideas??? Also what is the average tank range you guys are getting am I being stupid because I dont risk going any further than 110 miles between fill ups??
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 Registered Users and/or Members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Leo Vince exhaust for 1993 XT600E py330 Yamaha Tech 4 20 Jan 2008 02:37
XT600e Altitude Sickness dionysos Yamaha Tech 11 12 Sep 2007 18:30
XT600E '94 tank Roon-E Yamaha Tech 3 4 Jul 2007 13:24
Is the XT600E a reliable DS tourer? Stuhowes Yamaha Tech 10 20 Nov 2006 18:20
XT600E Luggage Iain W Yamaha Tech 1 29 Nov 2000 16:37

 
 

Announcements

Thinking about traveling? Not sure about the whole thing? Watch the HU Achievable Dream Video Trailers and then get ALL the information you need to get inspired and learn how to travel anywhere in the world!

Have YOU ever wondered who has ridden around the world? We did too - and now here's the list of Circumnavigators!
Check it out now
, and add your information if we didn't find you.

Next HU Eventscalendar

HU Event and other updates on the HUBB Forum "Traveller's Advisories" thread.
ALL Dates subject to change.

2024:

Add yourself to the Updates List for each event!

Questions about an event? Ask here

HUBBUK: info

See all event details

 
World's most listened to Adventure Motorbike Show!
Check the RAW segments; Grant, your HU host is on every month!
Episodes below to listen to while you, err, pretend to do something or other...

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

"Ultimate global guide for red-blooded bikers planning overseas exploration. Covers choice & preparation of best bike, shipping overseas, baggage design, riding techniques, travel health, visas, documentation, safety and useful addresses." Recommended. (Grant)



Ripcord Rescue Travel Insurance.

Ripcord Rescue Travel Insurance™ combines into a single integrated program the best evacuation and rescue with the premier travel insurance coverages designed for adventurers.

Led by special operations veterans, Stanford Medicine affiliated physicians, paramedics and other travel experts, Ripcord is perfect for adventure seekers, climbers, skiers, sports enthusiasts, hunters, international travelers, humanitarian efforts, expeditions and more.

Ripcord travel protection is now available for ALL nationalities, and travel is covered on motorcycles of all sizes!


 

What others say about HU...

"This site is the BIBLE for international bike travelers." Greg, Australia

"Thank you! The web site, The travels, The insight, The inspiration, Everything, just thanks." Colin, UK

"My friend and I are planning a trip from Singapore to England... We found (the HU) site invaluable as an aid to planning and have based a lot of our purchases (bikes, riding gear, etc.) on what we have learned from this site." Phil, Australia

"I for one always had an adventurous spirit, but you and Susan lit the fire for my trip and I'll be forever grateful for what you two do to inspire others to just do it." Brent, USA

"Your website is a mecca of valuable information and the (video) series is informative, entertaining, and inspiring!" Jennifer, Canada

"Your worldwide organisation and events are the Go To places to for all serious touring and aspiring touring bikers." Trevor, South Africa

"This is the answer to all my questions." Haydn, Australia

"Keep going the excellent work you are doing for Horizons Unlimited - I love it!" Thomas, Germany

Lots more comments here!



Five books by Graham Field!

Diaries of a compulsive traveller
by Graham Field
Book, eBook, Audiobook

"A compelling, honest, inspiring and entertaining writing style with a built-in feel-good factor" Get them NOW from the authors' website and Amazon.com, Amazon.ca, Amazon.co.uk.



Back Road Map Books and Backroad GPS Maps for all of Canada - a must have!

New to Horizons Unlimited?

New to motorcycle travelling? New to the HU site? Confused? Too many options? It's really very simple - just 4 easy steps!

Horizons Unlimited was founded in 1997 by Grant and Susan Johnson following their journey around the world on a BMW R80G/S.

Susan and Grant Johnson Read more about Grant & Susan's story

Membership - help keep us going!

Horizons Unlimited is not a big multi-national company, just two people who love motorcycle travel and have grown what started as a hobby in 1997 into a full time job (usually 8-10 hours per day and 7 days a week) and a labour of love. To keep it going and a roof over our heads, we run events all over the world with the help of volunteers; we sell inspirational and informative DVDs; we have a few selected advertisers; and we make a small amount from memberships.

You don't have to be a Member to come to an HU meeting, access the website, or ask questions on the HUBB. What you get for your membership contribution is our sincere gratitude, good karma and knowing that you're helping to keep the motorcycle travel dream alive. Contributing Members and Gold Members do get additional features on the HUBB. Here's a list of all the Member benefits on the HUBB.




All times are GMT +1. The time now is 10:33.