Go Back   Horizons Unlimited - The HUBB > Technical, Bike forums > Yamaha Tech
Yamaha Tech Originally the Yamaha XT600 Tech Forum, due to demand it now includes all Yamaha's technical / mechanical / repair / preparation questions.
Photo by George Guille, It's going to be a long 300km... Bolivian Amazon

I haven't been everywhere...
but it's on my list!


Photo by George Guille
It's going to be a long 300km...
Bolivian Amazon



Like Tree1Likes

Reply
 
LinkBack Thread Tools Display Modes
  #16  
Old 18 Sep 2009
Registered Users
Veteran HUBBer
 
Join Date: Aug 2009
Location: Dorset UK
Posts: 395
Just whack a bit of loctite or silicon on it.... shouldn't get too hot !
Reply With Quote
  #17  
Old 19 Sep 2009
bacardi23's Avatar
Registered Users
Veteran HUBBer
 
Join Date: Sep 2007
Location: XXX<-Portugal->Azores->Santa Maria (island)
Posts: 1,544
I will put some haraldite or loctite to cover the screw on top of the cap...
I must add that it looks pretty nice... looks like it was "welded" in lol


Vando
Attached Thumbnails
XT600E with MIKUNI single carb doable!-dsc02797.jpg  

XT600E with MIKUNI single carb doable!-dsc02799.jpg  

XT600E with MIKUNI single carb doable!-dsc02796.jpg  

Reply With Quote
  #18  
Old 19 Sep 2009
Registered Users
Veteran HUBBer
 
Join Date: Aug 2009
Location: Dorset UK
Posts: 395
Job done lad !
Reply With Quote
  #19  
Old 23 Sep 2009
bacardi23's Avatar
Registered Users
Veteran HUBBer
 
Join Date: Sep 2007
Location: XXX<-Portugal->Azores->Santa Maria (island)
Posts: 1,544
Hi there... new updates:
  1. awaiting the conic air filter (hope it arrives this week) Motorcycle K&N Style 60 mm Chrome Cone Power Air Filter:eBay Motors (item 250494158034 end time Oct-06-09 01:16:49 PDT)
  2. Buy one of these to replace that funny tube I bought to fit as carb-to-airbo inlet: 60mm 2 3/8" Silver 2 Py High Temp Air Feed Ducting 1M on eBay (end time 05-Oct-09 10:16:48 BST)
  3. buy one of these so I can fit the air filter I bought nice and easy: 60mm 2 3/8" Aluminium Alloy Beaded Hose Joiner Silicone on eBay (end time 06-Oct-09 15:29:21 BST)
these last 2 items are about 40€ worth...

Vando
Reply With Quote
  #20  
Old 4 Oct 2009
bacardi23's Avatar
Registered Users
Veteran HUBBer
 
Join Date: Sep 2007
Location: XXX<-Portugal->Azores->Santa Maria (island)
Posts: 1,544
Bought those two items... air filter hasn't arrived yet...


Vando
Reply With Quote
  #21  
Old 10 Nov 2009
bacardi23's Avatar
Registered Users
Veteran HUBBer
 
Join Date: Sep 2007
Location: XXX<-Portugal->Azores->Santa Maria (island)
Posts: 1,544
All parts have arrived... work is rainchecked till Christmas holidays as I'm back at college!


I'm considering on buying a grizzly 600 carburetor kit(needles and the weird not O-RING) it's about 30USD delivered so.. why not!?


Vando
Reply With Quote
  #22  
Old 18 Mar 2013
Registered Users
HUBB regular
 
Join Date: Mar 2013
Location: Denmark
Posts: 35
Hi Vando

New here and VERY curious about your thoughts and transformations on the single carb on XT 600, as I'm about to do it on my own 1993 XT600. I got the manifold and a Keihin FCR 39 carbie. I'm determined on doing this just for the challenge. What vas your experience with the damper and behavior?

Best Regards

Jakob
Reply With Quote
  #23  
Old 8 Apr 2013
bacardi23's Avatar
Registered Users
Veteran HUBBer
 
Join Date: Sep 2007
Location: XXX<-Portugal->Azores->Santa Maria (island)
Posts: 1,544
Hi Jakob... Been away from the HUBB for a while now.

In order for you to get this to work you will have to change the rear shock mount position so you can SAFELY accomodate the rear shock and avoid it hitting the carburetor!

You might know already that you will need to either modify or remove the stock airbox in order to work with the single carburetor.

I've got a brand new 2-into-1 carburetor intake that you will need to make the exchange. If you want it, send me a PM!

On the pictures I showed, I actually effectively repaired the carburetor cap with JB-weld! I also used JB-weld to repair both my engine casings and it has been holding for over 3k km without any leaks or cracks whatsoever.


Vando
Reply With Quote
  #24  
Old 17 Jul 2014
Registered Users
HUBB regular
 
Join Date: Mar 2013
Location: Denmark
Posts: 35
Hi Vando

Long Time and old thread. Just want to Say That I finally succeded and my XT is now equpped with a FCR 39 carb. This is in general what I did:

- removed old carb setup and airbox
- grinded out part of the frame as you did on your picture.
- relocated the rear shockmount approx. 6 cm back.
-altered the lower shockmount/linkarm to accomodate a ktm lc4 rear shock.
- fabricated a 2 in 1 manifold for the carb which is 4 cm shorter than the grizzly. Otherwise the carb would hit the starter.

Bottomline - the shit is working perfectly. Suspension is working and so is the fcr.

Pics:
XT600E with MIKUNI single carb doable!-imageuploadedbytapatalk1405629870.656936.jpg
XT600E with MIKUNI single carb doable!-imageuploadedbytapatalk1405629941.659093.jpg
XT600E with MIKUNI single carb doable!-imageuploadedbytapatalk1405629965.582596.jpg
XT600E with MIKUNI single carb doable!-imageuploadedbytapatalk1405629988.064110.jpg

Best Regards

Jakob


Sent from my iPhone using Tapatalk
Reply With Quote
  #25  
Old 18 Jul 2014
Registered Users
Veteran HUBBer
 
Join Date: May 2012
Location: Lithuania
Posts: 204
So much want right now... Damn you, wallet!

But my question would be: isn't Keihin FCR 35 dual carb setup (like the ones "Performance for raptor 660") better or the same like 39 single?
I don't know if they would fit an XT or not, but I think they should.
Reply With Quote
  #26  
Old 18 Jul 2014
xtrock's Avatar
Registered Users
Veteran HUBBer
 
Join Date: May 2013
Location: Norway
Posts: 1,325
Cutting frame and changing place for shock? No this is to much, if bike is that bad in the beginning i recomend buying a KTM 75Hp, you will never get enough hp from the XT...
Reply With Quote
  #27  
Old 18 Jul 2014
xtrock's Avatar
Registered Users
Veteran HUBBer
 
Join Date: May 2013
Location: Norway
Posts: 1,325
Quote:
Originally Posted by Mezo View Post
Ever seen a 25+ year old 75HP KTM?

Mezo.
Why you need it to be 25+ years old? The price here on the models around 2000 is so low that you can compare with old XT.
Reply With Quote
  #28  
Old 18 Jul 2014
Registered Users
HUBB regular
 
Join Date: Mar 2013
Location: Denmark
Posts: 35
Actually it was just to Challenge myself as og it could be done. The lower rpm torgue has definately improved, but i'm not sure I have gained any hp.
Also i'm not sure I Can Call it a Yamaha anymore so now i'm calling it YamaKTM. Reason is this:

- Carb (fcr39) from a ktm exc 450
- rear shock from a ktm lc4
- rear wheel from a ktm lc4
- front fork is a 48mm WP USD from a ktm lc4
- front wheel with 300mm disc and Brembo caliper also from ktm lc4.

Also for me I like the simplicity of one carb in terms tuning and adjusting


Sent from my iPhone using Tapatalk
Reply With Quote
  #29  
Old 18 Jul 2014
Registered Users
Veteran HUBBer
 
Join Date: May 2014
Location: Crete Greece
Posts: 104
I've just got a dellorto phm 38mm with the cables and the throttle just so I can convert mine too... I have ordered a grizzly manifold from eBay and I'm anxiously waiting for the part to come to Greece so I can do that too... I'm not gonna cut the frame though... I'm gonna put a high flow tube with a conic air filter that's gonna go around the rear suspension... will that work?
Reply With Quote
  #30  
Old 18 Jul 2014
Registered Users
Veteran HUBBer
 
Join Date: May 2014
Location: Crete Greece
Posts: 104
Quote:
Originally Posted by Svaneberg View Post
Actually it was just to Challenge myself as og it could be done. The lower rpm torgue has definately improved, but i'm not sure I have gained any hp.
Also i'm not sure I Can Call it a Yamaha anymore so now i'm calling it YamaKTM. Reason is this:

- Carb (fcr39) from a ktm exc 450
- rear shock from a ktm lc4
- rear wheel from a ktm lc4
- front fork is a 48mm WP USD from a ktm lc4
- front wheel with 300mm disc and Brembo caliper also from ktm lc4.

Also for me I like the simplicity of one carb in terms tuning and adjusting


Sent from my iPhone using Tapatalk
I think your manifold and the Carb is too small... will check it further(I think I did the same mistake) but it has to do with cccm (cubic cm per min) and the flow of the intake into the engine... will check the cccm from the guy who made me my handmade exhaust... he was at school with me and I remember he had a book with all that equations about flow etc
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 Registered Users and/or Members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Y boot for XT600 single carb conversion? Tenere Tom Yamaha Tech 3 27 Mar 2009 14:49
XT600E carb rubbers DAVSATO Yamaha Tech 11 6 Jan 2008 19:32
Engine swap TT600 or XT600E Engine into old XT600 2KF? Doable? Martynbiker Yamaha Tech 2 17 Dec 2007 05:44
Mikuni carb issues and ID. Gonzo Honda Tech 2 13 Nov 2007 06:32
1989 3aj carb swap/xt600e chrisschef Yamaha Tech 2 8 Dec 2006 19:25

 
 

Announcements

Thinking about traveling? Not sure about the whole thing? Watch the HU Achievable Dream Video Trailers and then get ALL the information you need to get inspired and learn how to travel anywhere in the world!

Have YOU ever wondered who has ridden around the world? We did too - and now here's the list of Circumnavigators!
Check it out now
, and add your information if we didn't find you.

Next HU Eventscalendar

HU Event and other updates on the HUBB Forum "Traveller's Advisories" thread.
ALL Dates subject to change.

2024:

Add yourself to the Updates List for each event!

Questions about an event? Ask here

HUBBUK: info

See all event details

 
World's most listened to Adventure Motorbike Show!
Check the RAW segments; Grant, your HU host is on every month!
Episodes below to listen to while you, err, pretend to do something or other...

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

"Ultimate global guide for red-blooded bikers planning overseas exploration. Covers choice & preparation of best bike, shipping overseas, baggage design, riding techniques, travel health, visas, documentation, safety and useful addresses." Recommended. (Grant)



Ripcord Rescue Travel Insurance.

Ripcord Rescue Travel Insurance™ combines into a single integrated program the best evacuation and rescue with the premier travel insurance coverages designed for adventurers.

Led by special operations veterans, Stanford Medicine affiliated physicians, paramedics and other travel experts, Ripcord is perfect for adventure seekers, climbers, skiers, sports enthusiasts, hunters, international travelers, humanitarian efforts, expeditions and more.

Ripcord travel protection is now available for ALL nationalities, and travel is covered on motorcycles of all sizes!


 

What others say about HU...

"This site is the BIBLE for international bike travelers." Greg, Australia

"Thank you! The web site, The travels, The insight, The inspiration, Everything, just thanks." Colin, UK

"My friend and I are planning a trip from Singapore to England... We found (the HU) site invaluable as an aid to planning and have based a lot of our purchases (bikes, riding gear, etc.) on what we have learned from this site." Phil, Australia

"I for one always had an adventurous spirit, but you and Susan lit the fire for my trip and I'll be forever grateful for what you two do to inspire others to just do it." Brent, USA

"Your website is a mecca of valuable information and the (video) series is informative, entertaining, and inspiring!" Jennifer, Canada

"Your worldwide organisation and events are the Go To places to for all serious touring and aspiring touring bikers." Trevor, South Africa

"This is the answer to all my questions." Haydn, Australia

"Keep going the excellent work you are doing for Horizons Unlimited - I love it!" Thomas, Germany

Lots more comments here!



Five books by Graham Field!

Diaries of a compulsive traveller
by Graham Field
Book, eBook, Audiobook

"A compelling, honest, inspiring and entertaining writing style with a built-in feel-good factor" Get them NOW from the authors' website and Amazon.com, Amazon.ca, Amazon.co.uk.



Back Road Map Books and Backroad GPS Maps for all of Canada - a must have!

New to Horizons Unlimited?

New to motorcycle travelling? New to the HU site? Confused? Too many options? It's really very simple - just 4 easy steps!

Horizons Unlimited was founded in 1997 by Grant and Susan Johnson following their journey around the world on a BMW R80G/S.

Susan and Grant Johnson Read more about Grant & Susan's story

Membership - help keep us going!

Horizons Unlimited is not a big multi-national company, just two people who love motorcycle travel and have grown what started as a hobby in 1997 into a full time job (usually 8-10 hours per day and 7 days a week) and a labour of love. To keep it going and a roof over our heads, we run events all over the world with the help of volunteers; we sell inspirational and informative DVDs; we have a few selected advertisers; and we make a small amount from memberships.

You don't have to be a Member to come to an HU meeting, access the website, or ask questions on the HUBB. What you get for your membership contribution is our sincere gratitude, good karma and knowing that you're helping to keep the motorcycle travel dream alive. Contributing Members and Gold Members do get additional features on the HUBB. Here's a list of all the Member benefits on the HUBB.




All times are GMT +1. The time now is 18:36.