Go Back   Horizons Unlimited - The HUBB > Technical, Bike forums > Yamaha Tech
Yamaha Tech Originally the Yamaha XT600 Tech Forum, due to demand it now includes all Yamaha's technical / mechanical / repair / preparation questions.
Photo by Daniel Rintz, Himba children, Namibia

The only impossible journey
is the one
you never begin

Photo by Daniel Rintz,
Himba children, Namibia



Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 9 Dec 2010
banditderek's Avatar
Registered Users
Veteran HUBBer
 
Join Date: Dec 2009
Location: Brisbane, Australia
Posts: 133
XT600e issue?

My wife and I are getting our XT600e's made up for some serious traveling. Her bike is stock standard and low milage, whereas mine has been used to commute, travel, green lane etc. Mine had an aftermarket silencer on it, but my wifes didnt. My swingarm shaft and bearings showed wear to the right hand side, hers did not. All my bearings are changed now and all linkages greaced. I have a Marvin pipe on it now. Here's the thing though, when my suspension in compressed it kinda goes downwards slightliy diagonally, in a way which could wear the bearings out on the right hand side. My wifes bike doesnt, hers goes straight down and up. :confused1: Why? Both bikes have new suspension and all bearings, so why the difference? Is the exhaust on the 4PT part of the subframe bracing? Even a little? I know in older models it was an integral part of it.
__________________
Reply With Quote
  #2  
Old 9 Dec 2010
Registered Users
Veteran HUBBer
 
Join Date: Nov 2009
Location: christchurch newzealand
Posts: 384
Are there any spacers or washers that mihjt have been put in the wrong place?
Reply With Quote
  #3  
Old 10 Dec 2010
Registered Users
Veteran HUBBer
 
Join Date: Dec 2008
Location: Denmark
Posts: 1,417
The xt600 from around mid95 and atleast from 96 and up, has a slightly other frame than the others. It has a rod going from the right passenger fottpeg, going backwards and up, stiffening the rear frame. So the exhaust doenst carry the load anymore.

I dont think I ever heard about a xt600 with a broken subframe, but better safe than sorry I guess
Reply With Quote
  #4  
Old 10 Dec 2010
Registered Users
Veteran HUBBer
 
Join Date: Aug 2001
Location: sunny England
Posts: 790
the stock XT exhaust couldnt support a polo mint, in fact even the weight of too much paint seems to warp it thats probably why yamaha only put a micron thickness on it.

sounds like the bearings were not the only thing worn, was the shaft changed too?
__________________
dave
Reply With Quote
  #5  
Old 10 Dec 2010
banditderek's Avatar
Registered Users
Veteran HUBBer
 
Join Date: Dec 2009
Location: Brisbane, Australia
Posts: 133
The rear axel was bent, but I put a new one in. Dunno about the spacer/bearings, I'm gonna go see the mechanic tomorrow. I'll keep you posted. I have a hepco and beker luggage rack frame on too. Surely that will stiffen the back up somewhat?
__________________
Reply With Quote
  #6  
Old 11 Dec 2010
Registered Users
Veteran HUBBer
 
Join Date: Nov 2009
Location: christchurch newzealand
Posts: 384
Have a look at the parts manual and see if all the spacers and bits are there and in the right place.....
Reply With Quote
  #7  
Old 11 Dec 2010
Registered Users
New on the HUBB
 
Join Date: Dec 2010
Location: Slovenia
Posts: 17
.....
Reply With Quote
  #8  
Old 17 Dec 2010
banditderek's Avatar
Registered Users
Veteran HUBBer
 
Join Date: Dec 2009
Location: Brisbane, Australia
Posts: 133
The mechanic braced the rear subframe with some machined spacers and a pretty sturdy bracket. It cant be seen much when the side covers are on but has done the job, as the suspension now goes up, and straight down. I will put full pics on here as soon as I get it back. Its ready for the onslaught...
__________________
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 Registered Users and/or Members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Electrical Issue preppypyro Yamaha Tech 5 14 Apr 2010 16:57
Carnet issue airamerica Trip Paperwork 1 25 Mar 2009 08:19
2006(!) XT600E speedo readout issue AndrewS Yamaha Tech 8 9 Jul 2008 21:03
security issue krzysiek North Africa 2 26 Nov 2004 15:59

 
 

Announcements

Thinking about traveling? Not sure about the whole thing? Watch the HU Achievable Dream Video Trailers and then get ALL the information you need to get inspired and learn how to travel anywhere in the world!

Have YOU ever wondered who has ridden around the world? We did too - and now here's the list of Circumnavigators!
Check it out now
, and add your information if we didn't find you.

Next HU Eventscalendar

HU Event and other updates on the HUBB Forum "Traveller's Advisories" thread.
ALL Dates subject to change.

2024:

Add yourself to the Updates List for each event!

Questions about an event? Ask here

HUBBUK: info

See all event details

 
World's most listened to Adventure Motorbike Show!
Check the RAW segments; Grant, your HU host is on every month!
Episodes below to listen to while you, err, pretend to do something or other...

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

"Ultimate global guide for red-blooded bikers planning overseas exploration. Covers choice & preparation of best bike, shipping overseas, baggage design, riding techniques, travel health, visas, documentation, safety and useful addresses." Recommended. (Grant)



Ripcord Rescue Travel Insurance.

Ripcord Rescue Travel Insurance™ combines into a single integrated program the best evacuation and rescue with the premier travel insurance coverages designed for adventurers.

Led by special operations veterans, Stanford Medicine affiliated physicians, paramedics and other travel experts, Ripcord is perfect for adventure seekers, climbers, skiers, sports enthusiasts, hunters, international travelers, humanitarian efforts, expeditions and more.

Ripcord travel protection is now available for ALL nationalities, and travel is covered on motorcycles of all sizes!


 

What others say about HU...

"This site is the BIBLE for international bike travelers." Greg, Australia

"Thank you! The web site, The travels, The insight, The inspiration, Everything, just thanks." Colin, UK

"My friend and I are planning a trip from Singapore to England... We found (the HU) site invaluable as an aid to planning and have based a lot of our purchases (bikes, riding gear, etc.) on what we have learned from this site." Phil, Australia

"I for one always had an adventurous spirit, but you and Susan lit the fire for my trip and I'll be forever grateful for what you two do to inspire others to just do it." Brent, USA

"Your website is a mecca of valuable information and the (video) series is informative, entertaining, and inspiring!" Jennifer, Canada

"Your worldwide organisation and events are the Go To places to for all serious touring and aspiring touring bikers." Trevor, South Africa

"This is the answer to all my questions." Haydn, Australia

"Keep going the excellent work you are doing for Horizons Unlimited - I love it!" Thomas, Germany

Lots more comments here!



Five books by Graham Field!

Diaries of a compulsive traveller
by Graham Field
Book, eBook, Audiobook

"A compelling, honest, inspiring and entertaining writing style with a built-in feel-good factor" Get them NOW from the authors' website and Amazon.com, Amazon.ca, Amazon.co.uk.



Back Road Map Books and Backroad GPS Maps for all of Canada - a must have!

New to Horizons Unlimited?

New to motorcycle travelling? New to the HU site? Confused? Too many options? It's really very simple - just 4 easy steps!

Horizons Unlimited was founded in 1997 by Grant and Susan Johnson following their journey around the world on a BMW R80G/S.

Susan and Grant Johnson Read more about Grant & Susan's story

Membership - help keep us going!

Horizons Unlimited is not a big multi-national company, just two people who love motorcycle travel and have grown what started as a hobby in 1997 into a full time job (usually 8-10 hours per day and 7 days a week) and a labour of love. To keep it going and a roof over our heads, we run events all over the world with the help of volunteers; we sell inspirational and informative DVDs; we have a few selected advertisers; and we make a small amount from memberships.

You don't have to be a Member to come to an HU meeting, access the website, or ask questions on the HUBB. What you get for your membership contribution is our sincere gratitude, good karma and knowing that you're helping to keep the motorcycle travel dream alive. Contributing Members and Gold Members do get additional features on the HUBB. Here's a list of all the Member benefits on the HUBB.




All times are GMT +1. The time now is 14:37.