Go Back   Horizons Unlimited - The HUBB > Technical, Bike forums > Yamaha Tech
Yamaha Tech Originally the Yamaha XT600 Tech Forum, due to demand it now includes all Yamaha's technical / mechanical / repair / preparation questions.
Photo by Daniel Rintz, Himba children, Namibia

The only impossible journey
is the one
you never begin

Photo by Daniel Rintz,
Himba children, Namibia



Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 7 Mar 2012
Registered Users
New on the HUBB
 
Join Date: Nov 2011
Location: Washington, USA
Posts: 6
XT600 Engine Rebuild

Hello everyone...been lurking around here for a while and I figure it was about time I posted an intro and ask a few questions.

After researching the XT600 I decided I needed to get one. I ended up picking up a 1990 XT600 with 6,000 miles for $800.

Here it is when I bought it...


Enjoyed it...road around town, climbed some local hills but not wanting to take it too far out of town until I get a couple issues resolved.


As it sits today...plastidip painted it/protaper bars and grips/mirrors that are the worst I have ever had. Need the stock ones back, broke one while offroading.


The main reason I am posting is to gather some information on potential engine rebuild ahead of me. After putting about 1,000 miles on it so far I have been noticing a pretty persistent clank,clank,clank coming from what appears to be either the cylinder head or the main bore itself and also occasional white smoke out of the tailpipe. I have done a compression check and got readings between 100-110 psi, leading me to believe maybe the rings could be worn. So I will be pulling the head off pretty soon to check how the bore is looking and also the condition of the head/valves. I also pulled the bolt off of the oil filter cover and had plenty of oil coming out so I am assuming it is getting plenty of oil.

1) When building the XT600 engine have the aftermarket gasket kits been of good quality or is OEM the best route?

2) How difficult is it to check and replace the cam chain if necessary? Is a special tool needed?

3) Should the crank woodruff keys be replaced? And is there one on each side of the crank? Any special tools?

Any other tips for rebuilding the XT engine would be appreciated!
Reply With Quote
  #2  
Old 8 Mar 2012
G600's Avatar
Registered Users
Veteran HUBBer
 
Join Date: May 2009
Posts: 235
Nice bike...


The engine is noisy by nature, and 6000 miles is not much. Are you sure you have a problem?


Is the bike burning oil?


I have heard about a loose nut on the balance shaft making some noise. Maybe you should take off the right hand engine cover and check all nuts (the one on the balance shaft and the others) first..
__________________
----------
Yamaha XT600E '01, Honda XR400 '03, Yamaha XT550 '83
Reply With Quote
  #3  
Old 8 Mar 2012
Registered Users
New on the HUBB
 
Join Date: Nov 2011
Location: Washington, USA
Posts: 6
Thanks for your response!

No the bike doesn't appear to be using any oil. The only real thing leading me to believing there is an issue within the engine itself is the low compression and noise. I have heard that these engine definitely make their own distinct noise but I just get the impression it is more than that. I'll most definitely take a look at the balancer shaft nut and the various other ones.

I am going to try and not cause myself as much pain as possible, such as starting an engine rebuild when not neccessary. So any other info for diagnostics before tearing it apart would be appreciated.
Reply With Quote
  #4  
Old 8 Mar 2012
Registered Users
Veteran HUBBer
 
Join Date: Dec 2008
Location: Denmark
Posts: 1,417
Check the valves and other "easy"parts before you dig into the engine
Reply With Quote
  #5  
Old 15 Mar 2012
Registered Users
New on the HUBB
 
Join Date: Nov 2011
Location: Washington, USA
Posts: 6
Do the basics first!!!

Quote:
Originally Posted by Jens Eskildsen View Post
Check the valves and other "easy"parts before you dig into the engine
Thanks for the advice Jens...I am a chronic over thinker...so its good to be reminded of the basics. Went ahead an checked the valves yesterday and one intake valve seemed extremely tight. Both exhaust valves being a little tight as well.

This time it paid off too, previous readings were near 100psi and now are...


Pulled the plug in the process and regapped. Not a pro at reading plugs but it seemed to look good.


Fired it up and sounded way better. Took it for a spin around the block and most of the "clanking" has gone away. Bike seems to even have more power then before.
Reply With Quote
  #6  
Old 18 Mar 2012
Registered Users
Veteran HUBBer
 
Join Date: Feb 2007
Location: Manchester
Posts: 150
Thats a very nice straight looking bike when I bought my TTR600RE it was only just over 2 year old and I thought it was noisy at the top end until my more experienced brother in law told me they're all like that, they are air cooled when all said and done. I wouldnt worry you seem to have a nice machine there.
__________________
Yamaha TT600RE 2004
Yamaha YZ250 2 stroke 99
Reply With Quote
  #7  
Old 18 Mar 2012
Registered Users
Veteran HUBBer
 
Join Date: Mar 2007
Location: UK
Posts: 4,343
I bet you are glad you stayed with getting the basics sorted out before leaping into stripping the engine!
Now the valves are in tolerance it may be that the spark plug colour improves - in your pic it looks too black/sooty at present.
I suggest that you check it again in a few 100 miles and see how it looks, or even invest in a new one and see how that goes on.
__________________
Dave
Reply With Quote
  #8  
Old 21 Mar 2012
Registered Users
New on the HUBB
 
Join Date: Nov 2011
Location: Washington, USA
Posts: 6
Thanks for the help...I will most definitely check the plug again and just go ahead and put a new one in too! I am most definitely glad I did the basics first, it was a good lesson learned.

I have also since heard from other guys with big singles and you guys now confirm that these engines do naturally tend to make a bit of noise anyway. Looking forward to putting many road and dirt miles on the XT this spring/summer! Cheers
Reply With Quote
  #9  
Old 30 Sep 2012
Registered Users
New on the HUBB
 
Join Date: Sep 2012
Posts: 5
tt600

Hi, you have probably finished the job, but for info only I think the xt and tt are very close motor wise. The one that I own had a knock at idle and just above, this turned out to be the key in drive gear on the crank for the balancer shaft and it sounds pretty bad first up, stick your ear or ? on the motor to determine the source of the problem.
Reply With Quote
  #10  
Old 30 Dec 2012
Registered Users
New on the HUBB
 
Join Date: Dec 2012
Location: Sweden
Posts: 2
I bought an old TT600 from 1987 a couple of years ago. It sounded real bad and it was the nut on the primary gear that was loose! It had sheared the key almost completely off! I bought a new key and new washers and used locktite as well. After assembly it was OK! I checked the ignition and pulled the flywheel; the timing was one tooth off and one slipper blade was dislocated. Before taking a trip around the world I would check up such things on a TT or XT. My TT used a bit of oil and it was the rings that where worn. I have fitted new rings and valve seals now. The cylinder bore and piston was very good so no rebore was nessesary.
Reply With Quote
  #11  
Old 19 Jun 2013
Registered Users
HUBB regular
 
Join Date: Sep 2008
Location: Canada
Posts: 84
If you decide to rebuild your engine this is some of the stuff I ran into when rebuilding my 99, hope it helps.

Motorsports Forum - Top end rebuild
Reply With Quote
  #12  
Old 19 Jun 2013
Registered Users
Veteran HUBBer
 
Join Date: May 2013
Location: Wisconsin, USA
Posts: 827
That's a real good and well explained tutorial on upper end engine work Pursang .

Most of the work and way to do it is good for other brands as well, I saw quite a few parts that appear identical to my Honda XL and a newer Suzuki quad. It would be a good article to tag or bookmark !!! Thanks
Reply With Quote
  #13  
Old 24 Jun 2013
G600's Avatar
Registered Users
Veteran HUBBer
 
Join Date: May 2009
Posts: 235
Quote:
Originally Posted by pursang View Post
If you decide to rebuild your engine this is some of the stuff I ran into when rebuilding my 99, hope it helps.

Motorsports Forum - Top end rebuild
That is ONE GREAT WRITEUP. Wow...
__________________
----------
Yamaha XT600E '01, Honda XR400 '03, Yamaha XT550 '83
Reply With Quote
  #14  
Old 24 Jun 2013
otr002's Avatar
Contributing Member
HUBB regular
 
Join Date: Jun 2011
Location: Brisbane Australia
Posts: 69
Have a read of this........
The Ténéré Forum • View topic - Balance shaft gorn west i think

And this......
The Ténéré Forum • View topic - Engine rattle whilst cold
__________________
I once ruled the world, till mum told me it was only the garden!
Reply With Quote
  #15  
Old 1 Feb 2015
Registered Users
New on the HUBB
 
Join Date: Feb 2015
Posts: 2
small world

LAST april 19 2014, I bought a Yamaha xt600 from a fella that stated he was a retired Washington Trooper. Havent put a ton of miles on it as its my play bike. As it sat the winter I was noticing a bit of oile seeping from the left front fork, so I jumped on the internet for help As I got onto Horizons site I saw my XT600, prior to me purchasing it. Not too many that are black dipped with ProTaper bars and lousy mirrors. I live in Vancouver BC, my question to you is do you still have the tank plastics? Its still the same color, I have replaced the front wheel, too wobbly at speed, and was unsafe Paul
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 Registered Users and/or Members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
TT600RE the same engine as XT600? geordie_e Yamaha Tech 4 7 Jan 2012 19:54
Engine Gaskets Question preppypyro Yamaha Tech 8 6 Jan 2012 09:42
XT600 engine parts needed binfer Yamaha Tech 3 30 Nov 2011 21:20
XT600E 2002 Engine Oil Trichelia Yamaha Tech 17 17 Nov 2011 14:25
XT600 engine for sale (UK) Tenere Tom Yamaha Tech 2 13 Nov 2011 20:12

 
 

Announcements

Thinking about traveling? Not sure about the whole thing? Watch the HU Achievable Dream Video Trailers and then get ALL the information you need to get inspired and learn how to travel anywhere in the world!

Have YOU ever wondered who has ridden around the world? We did too - and now here's the list of Circumnavigators!
Check it out now
, and add your information if we didn't find you.

Next HU Eventscalendar

HU Event and other updates on the HUBB Forum "Traveller's Advisories" thread.
ALL Dates subject to change.

2024:

Add yourself to the Updates List for each event!

Questions about an event? Ask here

HUBBUK: info

See all event details

 
World's most listened to Adventure Motorbike Show!
Check the RAW segments; Grant, your HU host is on every month!
Episodes below to listen to while you, err, pretend to do something or other...

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

"Ultimate global guide for red-blooded bikers planning overseas exploration. Covers choice & preparation of best bike, shipping overseas, baggage design, riding techniques, travel health, visas, documentation, safety and useful addresses." Recommended. (Grant)



Ripcord Rescue Travel Insurance.

Ripcord Rescue Travel Insurance™ combines into a single integrated program the best evacuation and rescue with the premier travel insurance coverages designed for adventurers.

Led by special operations veterans, Stanford Medicine affiliated physicians, paramedics and other travel experts, Ripcord is perfect for adventure seekers, climbers, skiers, sports enthusiasts, hunters, international travelers, humanitarian efforts, expeditions and more.

Ripcord travel protection is now available for ALL nationalities, and travel is covered on motorcycles of all sizes!


 

What others say about HU...

"This site is the BIBLE for international bike travelers." Greg, Australia

"Thank you! The web site, The travels, The insight, The inspiration, Everything, just thanks." Colin, UK

"My friend and I are planning a trip from Singapore to England... We found (the HU) site invaluable as an aid to planning and have based a lot of our purchases (bikes, riding gear, etc.) on what we have learned from this site." Phil, Australia

"I for one always had an adventurous spirit, but you and Susan lit the fire for my trip and I'll be forever grateful for what you two do to inspire others to just do it." Brent, USA

"Your website is a mecca of valuable information and the (video) series is informative, entertaining, and inspiring!" Jennifer, Canada

"Your worldwide organisation and events are the Go To places to for all serious touring and aspiring touring bikers." Trevor, South Africa

"This is the answer to all my questions." Haydn, Australia

"Keep going the excellent work you are doing for Horizons Unlimited - I love it!" Thomas, Germany

Lots more comments here!



Five books by Graham Field!

Diaries of a compulsive traveller
by Graham Field
Book, eBook, Audiobook

"A compelling, honest, inspiring and entertaining writing style with a built-in feel-good factor" Get them NOW from the authors' website and Amazon.com, Amazon.ca, Amazon.co.uk.



Back Road Map Books and Backroad GPS Maps for all of Canada - a must have!

New to Horizons Unlimited?

New to motorcycle travelling? New to the HU site? Confused? Too many options? It's really very simple - just 4 easy steps!

Horizons Unlimited was founded in 1997 by Grant and Susan Johnson following their journey around the world on a BMW R80G/S.

Susan and Grant Johnson Read more about Grant & Susan's story

Membership - help keep us going!

Horizons Unlimited is not a big multi-national company, just two people who love motorcycle travel and have grown what started as a hobby in 1997 into a full time job (usually 8-10 hours per day and 7 days a week) and a labour of love. To keep it going and a roof over our heads, we run events all over the world with the help of volunteers; we sell inspirational and informative DVDs; we have a few selected advertisers; and we make a small amount from memberships.

You don't have to be a Member to come to an HU meeting, access the website, or ask questions on the HUBB. What you get for your membership contribution is our sincere gratitude, good karma and knowing that you're helping to keep the motorcycle travel dream alive. Contributing Members and Gold Members do get additional features on the HUBB. Here's a list of all the Member benefits on the HUBB.




All times are GMT +1. The time now is 16:52.