Go Back   Horizons Unlimited - The HUBB > Technical, Bike forums > Yamaha Tech
XT 600 e Kick Start XT 600 e Kick Start
Register FAQ Calendar Today's Posts
Yamaha Tech Originally the Yamaha XT600 Tech Forum, due to demand it now includes all Yamaha's technical / mechanical / repair / preparation questions.
Photo by George Guille, It's going to be a long 300km... Bolivian Amazon

I haven't been everywhere...
but it's on my list!


Photo by George Guille
It's going to be a long 300km...
Bolivian Amazon



Reply
Page 1 of 2 1 2
 
LinkBack Thread Tools Display Modes
  #1  
Old 22 Oct 2007
stuxtttr's Avatar
Registered Users
Veteran HUBBer
  
Join Date: Sep 2007
Location: Lutterworth,Midlands, UK
Posts: 576
Wink XT 600 e Kick Start
Hi anyone got any info on fitting a Kick start to the XT, 1998 model. Cheers
Is it a good idea or an unessasary expense.
Reply With Quote
  #2  
Old 24 Oct 2007
Registered Users
HUBB regular
  
Join Date: Dec 2001
Location: Scotland
Posts: 35
kickstart
Hi,

My tuppenceworth,

I got a kickstart fitted to a 2001 XT600e by Dave Lambeth. Very expensive and never had to use it in anger on my trip.

Save your cash for traveling, buy a new battery and take a set of improvised jump leads.

Hope this helps.
Reply With Quote
  #3  
Old 1 Nov 2007
stuxtttr's Avatar
Registered Users
Veteran HUBBer
  
Join Date: Sep 2007
Location: Lutterworth,Midlands, UK
Posts: 576
Thumbs up Cheers
Thanks for that, this site is great for info like yours that could take years to get by word of mouth. I shall save me coppers and go for the new battery and jump lead option.

Stu
Reply With Quote
  #4  
Old 18 Apr 2008
bacardi23's Avatar
Registered Users
Veteran HUBBer
  
Join Date: Sep 2007
Location: XXX<-Portugal->Azores->Santa Maria (island)
Posts: 1,544
It's easy to fit the kickstart on the XT600E and it was the first engine work I'd done on my 1990 XT600E.

Check this 1989 XT600 microfiche that I guided myself on...

here are the parts I fitted on mine:

http://www.powerpartsplus.com/pages/...600W_-_1989%29
Here on the "Crankcase cover" page you need to get part 28

http://www.powerpartsplus.com/pages/...600W_-_1989%29
Here on the "Starter" page you need to get all those parts except the for the parts form 27 to 34.....

A good thing you can do is search for a kickstart shaft on eBay and get just these parts from the "Starter" page:

9,10,11,12,13,14,15,16,17,18,19 AND get a complete kickstart+boss kick crank....(I think I got my kickstart+boss kick crack from a XJ 650)

That setup doesn't include decompressor! but if ya want decompressor, just ask...


Vando
Last edited by bacardi23; 11 Oct 2012 at 03:51. Reason: added link
Reply With Quote
  #5  
Old 21 Apr 2008
Registered Users
HUBB regular
  
Join Date: Dec 2003
Posts: 43
Decompressor
Hi Vando, Would appreciate if you can post the information on installing the decompressor. Thanks. Cheers, Tom.
Reply With Quote
  #6  
Old 21 Apr 2008
bacardi23's Avatar
Registered Users
Veteran HUBBer
  
Join Date: Sep 2007
Location: XXX<-Portugal->Azores->Santa Maria (island)
Posts: 1,544
Hi Tom... I prefer the manual decompresser because it is the most simple, easiest and cheapest to put and looks good in my opinion...

so...Question is, manual or automatic?

Vando
Reply With Quote
  #7  
Old 21 Apr 2008
Registered Users
HUBB regular
  
Join Date: Dec 2003
Posts: 43
Manual Decompressor
Hi Vando, I would prefer the manual decompressor. I'm kinda old fashion still! Thanks. Cheers, Tom.
Reply With Quote
  #8  
Old 22 Apr 2008
bacardi23's Avatar
Registered Users
Veteran HUBBer
  
Join Date: Sep 2007
Location: XXX<-Portugal->Azores->Santa Maria (island)
Posts: 1,544
Hi tom.....

http://www.powerpartsplus.com/pages/...600W_-_1989%29
Here on the page of the Cylinder head you have to get the parts 28,29,30,31 and 32.

On the page "Camshaft Chain" you need to get the part number 12 or you can make your own cable bracket(holder)...

Besides that, you'll have to get a small bicycle-type of lever (the left lever with the bracket) that will fit securely on your handlebar, a cable with those things to put on the end to "close" the cable at the length you want AND one of those bicycle outer cable guides ( which the cable goes in )....

To put in the part number 28 on the cylinder head you can CAREFULLY punch a hole in that small black cap... I MEAN CAREFULLY so nothing falls into the cylinder and just pull the cap off...

You can lean the bike to it's side to help avoid anything falling into the cylinder....


DON'T FORGET to clean the hole without the cap or any small particle that fall into the cylinder will almost certainly damage the cylinder sleeve!

Vando
Last edited by bacardi23; 11 Oct 2012 at 03:54.
Reply With Quote
  #9  
Old 22 Apr 2008
bacardi23's Avatar
Registered Users
Veteran HUBBer
  
Join Date: Sep 2007
Location: XXX<-Portugal->Azores->Santa Maria (island)
Posts: 1,544
To put the part number 17 of the Starter page you will have to take the clutch out.....

After you take the clutch springs and that plate out you will see a weird shape nut. Try not to mess around with it...
When you take that weird shape nut, you can see the axle is "hallow"(don't know how if it is written like that) and there is a small metal ball in the axle, DO NOT LOSE IT..

Take the clutch plates out but don't loose the order of the because two of them are different and only fit in that specific order!


To take the clutch boss out you will need one of those air guns so you can take the lock nut from the inside.... but take a look before taking that nut out because it has a special spacer that helps hold the nut so it won't vibrate loose... it's easy! also, check the workshop manual for the XT600E so you know how tight you'll have to lock the nut back in on reassembling...

As for the clutch springs, be careful when you tighten them back on because if you over tighten it, the boss hub might brake ( it happened to me because I didn't have the workshop manual back then).....

Vando
Reply With Quote
  #10  
Old 22 Apr 2008
Registered Users
HUBB regular
  
Join Date: Dec 2003
Posts: 43
Thanks
Hi Vando, thanks for the information. Looks like a pretty big job. May not fit the decompressor if I can kick start it. I am trying to source out the parts now. Thanks. Cheers. Tom.
Reply With Quote
  #11  
Old 22 Apr 2008
bacardi23's Avatar
Registered Users
Veteran HUBBer
  
Join Date: Sep 2007
Location: XXX<-Portugal->Azores->Santa Maria (island)
Posts: 1,544
Hi tom... The decompresser looks good on the bike and is quite simple to do in my opinion... I don't need the decompresser because I can kick it with no hassle so it would be just something to do in the future because now I'm doing some things on the bike....

Vando
Reply With Quote
  #12  
Old 23 Apr 2008
Registered Users
HUBB regular
  
Join Date: Dec 2003
Posts: 43
Decompressor
Thanks Vando. I may as well get the parts and if it is not too big a job, I will go ahead with the decompressor when I am at the kickstart installation. Cheers, Tom.
Reply With Quote
  #13  
Old 26 Jan 2010
Registered Users
New on the HUBB
  
Join Date: Sep 2009
Location: Charleston SC
Posts: 2
Im going to bring this one back from the dead.

Ive just acquired an 84 XT600 for parts and i would like to add the kick starter to my 90 XT600E. The engine from the 84 is dead, sat outside for years without a sparkplug. Im going to be pulling my 90's engine apart soon to do the clutch and want to add the kick starter.
Reply With Quote
  #14  
Old 26 Jan 2010
bacardi23's Avatar
Registered Users
Veteran HUBBer
  
Join Date: Sep 2007
Location: XXX<-Portugal->Azores->Santa Maria (island)
Posts: 1,544
Info for you... The 2001-2005 Yamaha Raptor 660 ATV clutch kit is the same as for the 1990 XT600E.

I actually bought a Tusk clutch kit shipped for my '90 XT600E yesterday for 49.85USD on fleabay!


Vando
Reply With Quote
  #15  
Old 26 Jan 2010
Registered Users
HUBB regular
  
Join Date: May 2006
Location: Cambs. UK
Posts: 29
If the bike is 1998 the clutch arm is probably on the top of the clutch cover, that makes it a much harder job, I've just done my 1999/2000, on the older models you can fit an earlier clutch cover with the shaft hole already machined out behind a rubber plug but the earlier cover won't have the clutch operating arm fitted, you will need to machine the hole out yourself, the boss is cast into the inside and fairly accurate to centre up on a mill, once a small hole is drilled through you can turn the whole casting over and re-center from the outside and finish the shaft bore and oil seal recess.
I have a spare kickshaft and idler gear but no return spring, also a couple of shims are required as well as the guide and stopper plate but they are surprisingly cheap to buy new.
I think a manual decompressor would be easy to do on the head with a well shaped piece of 12mm bar and return spring, I'll tell you when I've finished mine.
Reply With Quote
Reply
Page 1 of 2 1 2

« Previous Thread | Next Thread »

Currently Active Users Viewing This Thread: 1 (0 Registered Users and/or Members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
XTZ 660 Tenere '94 cold start problem Ivchxtz660 Yamaha Tech 17 2 Oct 2017 10:35
Kick starting gone bad, need some part sources cavehamster Yamaha Tech 0 26 Jun 2006 18:22
3aj kick start Zimbo Yamaha Tech 1 17 Aug 2005 17:39
640 Adventure - doesn't want to start Matt Roach KTM Tech 12 5 May 2005 04:25
Oil level and kick starter Joseph Yamaha Tech 5 11 Jun 2001 13:44

 
 

Announcements

Thinking about traveling? Not sure about the whole thing? Watch the HU Achievable Dream Video Trailers and then get ALL the information you need to get inspired and learn how to travel anywhere in the world!

Have YOU ever wondered who has ridden around the world? We did too - and now here's the list of Circumnavigators!
Check it out now, and add your information if we didn't find you.

Next HU Eventscalendar

HU Event and other updates on the HUBB Forum "Traveller's Advisories" thread.
ALL Dates subject to change.

2024:

Add yourself to the Updates List for each event!

Questions about an event? Ask here

HUBBUK: info

See all event details

 
World's most listened to Adventure Motorbike Show!
Check the RAW segments; Grant, your HU host is on every month!
Episodes below to listen to while you, err, pretend to do something or other...

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

"Ultimate global guide for red-blooded bikers planning overseas exploration. Covers choice & preparation of best bike, shipping overseas, baggage design, riding techniques, travel health, visas, documentation, safety and useful addresses." Recommended. (Grant)



Ripcord Rescue Travel Insurance.

Ripcord Rescue Travel Insurance™ combines into a single integrated program the best evacuation and rescue with the premier travel insurance coverages designed for adventurers.

Led by special operations veterans, Stanford Medicine affiliated physicians, paramedics and other travel experts, Ripcord is perfect for adventure seekers, climbers, skiers, sports enthusiasts, hunters, international travelers, humanitarian efforts, expeditions and more.

Ripcord travel protection is now available for ALL nationalities, and travel is covered on motorcycles of all sizes!


 

What others say about HU...

"This site is the BIBLE for international bike travelers." Greg, Australia

"Thank you! The web site, The travels, The insight, The inspiration, Everything, just thanks." Colin, UK

"My friend and I are planning a trip from Singapore to England... We found (the HU) site invaluable as an aid to planning and have based a lot of our purchases (bikes, riding gear, etc.) on what we have learned from this site." Phil, Australia

"I for one always had an adventurous spirit, but you and Susan lit the fire for my trip and I'll be forever grateful for what you two do to inspire others to just do it." Brent, USA

"Your website is a mecca of valuable information and the (video) series is informative, entertaining, and inspiring!" Jennifer, Canada

"Your worldwide organisation and events are the Go To places to for all serious touring and aspiring touring bikers." Trevor, South Africa

"This is the answer to all my questions." Haydn, Australia

"Keep going the excellent work you are doing for Horizons Unlimited - I love it!" Thomas, Germany

Lots more comments here!



Five books by Graham Field!

Diaries of a compulsive traveller
by Graham Field
Book, eBook, Audiobook

"A compelling, honest, inspiring and entertaining writing style with a built-in feel-good factor" Get them NOW from the authors' website and Amazon.com, Amazon.ca, Amazon.co.uk.



Back Road Map Books and Backroad GPS Maps for all of Canada - a must have!

Your ad could be here, on EVERY page of the HUBB, or the whole website, or as many as you like!

New to Horizons Unlimited?

New to motorcycle travelling? New to the HU site? Confused? Too many options? It's really very simple - just 4 easy steps!

Horizons Unlimited was founded in 1997 by Grant and Susan Johnson following their journey around the world on a BMW R80G/S.

Susan and Grant Johnson Read more about Grant & Susan's story

Membership - help keep us going!

Horizons Unlimited is not a big multi-national company, just two people who love motorcycle travel and have grown what started as a hobby in 1997 into a full time job (usually 8-10 hours per day and 7 days a week) and a labour of love. To keep it going and a roof over our heads, we run events all over the world with the help of volunteers; we sell inspirational and informative DVDs; we have a few selected advertisers; and we make a small amount from memberships.

You don't have to be a Member to come to an HU meeting, access the website, or ask questions on the HUBB. What you get for your membership contribution is our sincere gratitude, good karma and knowing that you're helping to keep the motorcycle travel dream alive. Contributing Members and Gold Members do get additional features on the HUBB. Here's a list of all the Member benefits on the HUBB.



All times are GMT +1. The time now is 15:18.

Contact Us - Horizons Unlimited Motorcycle Travellers Website - Archive - Privacy Statement - Top