Go Back   Horizons Unlimited - The HUBB > Technical, Bike forums > Yamaha Tech
Yamaha Tech Originally the Yamaha XT600 Tech Forum, due to demand it now includes all Yamaha's technical / mechanical / repair / preparation questions.
Photo by Daniel Rintz, Himba children, Namibia

The only impossible journey
is the one
you never begin

Photo by Daniel Rintz,
Himba children, Namibia



Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 28 May 2007
Registered Users
New on the HUBB
 
Join Date: Apr 2007
Location: Ohio, USA
Posts: 6
Stripped oil filter bolt hole

Here's my problem: The ham fisted individual who owned the '90 XT before me decided it would be a great idea to tighten the bolts for the oil filter so tight he stripped the one in the 10 oclock position. I've owned it for about 3 weeks now and decided to change the oil today and discovered the bolt extremely loose. That would explain the ever so slight coating of oil on the left crankcase. Upon attempting to retighten it I found nary a thread to tighten it into. Any Suggestions out there in ultra smart XT land? How far are the threads into the case, can I just get the next longer bolt and get to the threads that aren't boogered up, ETC......... Any help will be a appreciated......
Reply With Quote
  #2  
Old 28 May 2007
Registered Users
HUBB regular
 
Join Date: Dec 2003
Posts: 43
Strip thread

There was a thread or two few weeks ago. Some very nice solutions. Do a search. Cheers.
Reply With Quote
  #3  
Old 28 May 2007
Registered Users
Veteran HUBBer
 
Join Date: Jan 2001
Location: Stockholm
Posts: 651
Two

Solutions:
1. Helicoil the damaged thread
2. Helicoil + install a thread end, so that you do not tighten the cover with the bolts but with a nut

Both involve removing the clutch cover.
Inserting a longer bolt is NOT a good idea; if you damage the inner engine casings you will be looking at major surgery to get your bike on the road again.

You say a slight film of oil on the LH side; assume that is looking from front to back? :-)

Auke
__________________
Auke
http://aukemarieke.blogspot.com
Reply With Quote
  #4  
Old 28 May 2007
Registered Users
Veteran HUBBer
 
Join Date: Aug 2001
Location: sunny England
Posts: 790
two good sugestions from aukboss, there should also be enough meat in the casing to drill out the hole and tap it out to 8mm, a much cheaper option if you dont have a helicoil kit already.
personally i would go with the helicoil and locktite a stud in there, then you will only ever disturb the nut and not the thread in the casing.
__________________
dave
Reply With Quote
  #5  
Old 28 May 2007
Registered Users
HUBB regular
 
Join Date: Dec 2006
Location: Brum
Posts: 44
As the guys say, a helicoil is the way to go - it's an easy and very quick job.
Reply With Quote
  #6  
Old 28 May 2007
Registered Users
New on the HUBB
 
Join Date: Apr 2007
Location: Ohio, USA
Posts: 6
Thanks for the ideas guys! You are the cat's meow! Sorry about the left side statement I I meand there was a film "Left" on the crankcase. I have no helicoil stuff available so I pulled the cover and found there was some threads left down there past the stripped ones. Will be heading to the store to find some studs to loctite into there. THanks, again, for the sugestions
Reply With Quote
  #7  
Old 28 May 2007
Registered Users
Veteran HUBBer
 
Join Date: Mar 2007
Location: UK
Posts: 4,343
Good reading

Here's another thread for the same issue (and there may be more) - worth a read before you go firm on your plan?


http://www.horizonsunlimited.com/hub...l-filter-22255


Cheers,

Dave
__________________
Dave
Reply With Quote
  #8  
Old 28 May 2007
Contributing Member
Veteran HUBBer
 
Join Date: Mar 2003
Location: London,England
Posts: 358
I think it is better to use a timesert better then a helicoil.
It would also be an idea to check the other 2 threads and get the fixed at the same time if needed.
Reply With Quote
  #9  
Old 29 May 2007
Registered Users
Veteran HUBBer
 
Join Date: Apr 2003
Location: Cape Town, South Africa
Posts: 303
Time Sert is definitely to prefer over Helicoil for one major advantage: Time Serts (properly fitted) can't dislodge and unscrew themselves. Helicoils sometimes do and the result might be a case for the well equipped enginering shop (TIGweld & mill) or Yamaha parts salesman.

Helicoil sets are dirt cheap. If you can't afford them then go to a workshop instead of messing with your bike using inappropriate tools.

Time Serts unfortunately require VERY expensive tools which makes them a No-NO for hobby mechanics and even small workshops. Find someone who fits them for you. I'll do it for you if you come to Cape Town

You can get an extra long Helicoil fitting tool kit for suitable for retapping the XT oil filter bolts threads without taking the clutch cover off.
Reply With Quote
  #10  
Old 29 May 2007
Registered Users
HUBB regular
 
Join Date: Apr 2007
Location: Sydney Australia
Posts: 28
Mine too

2 of my oil filter cover bolts were stripped when I bought my bike.
Take the right side case cover off, it only takes about 45 mins. (you'll need a new gasket) and helicoil all 3 of them. If they aren't strpped yet they will be soon enough, just do all 3 now. You can get longer helicoils if your concerned you won't get enough purchase.
All up it's about a 2 hour job in the garage or about an hour in a real workshop.
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 Registered Users and/or Members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
XT600E engine oil level bogweasel Yamaha Tech 10 14 Jan 2011 20:29
oil change thumper86 Yamaha Tech 5 18 May 2007 17:56
Stripped sump plug in Malawi -HELP! jim Yamaha Tech 19 3 May 2007 08:09
Help, thread gone on oil filter bolt Daves Yamaha Tech 6 18 Jul 2006 19:42
Fitting a foam air filter PaulJ Travellers' questions that don't fit anywhere else 2 10 Apr 2003 14:38

 
 

Announcements

Thinking about traveling? Not sure about the whole thing? Watch the HU Achievable Dream Video Trailers and then get ALL the information you need to get inspired and learn how to travel anywhere in the world!

Have YOU ever wondered who has ridden around the world? We did too - and now here's the list of Circumnavigators!
Check it out now
, and add your information if we didn't find you.

Next HU Eventscalendar

HU Event and other updates on the HUBB Forum "Traveller's Advisories" thread.
ALL Dates subject to change.

2024:

Add yourself to the Updates List for each event!

Questions about an event? Ask here

HUBBUK: info

See all event details

 
World's most listened to Adventure Motorbike Show!
Check the RAW segments; Grant, your HU host is on every month!
Episodes below to listen to while you, err, pretend to do something or other...

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

"Ultimate global guide for red-blooded bikers planning overseas exploration. Covers choice & preparation of best bike, shipping overseas, baggage design, riding techniques, travel health, visas, documentation, safety and useful addresses." Recommended. (Grant)



Ripcord Rescue Travel Insurance.

Ripcord Rescue Travel Insurance™ combines into a single integrated program the best evacuation and rescue with the premier travel insurance coverages designed for adventurers.

Led by special operations veterans, Stanford Medicine affiliated physicians, paramedics and other travel experts, Ripcord is perfect for adventure seekers, climbers, skiers, sports enthusiasts, hunters, international travelers, humanitarian efforts, expeditions and more.

Ripcord travel protection is now available for ALL nationalities, and travel is covered on motorcycles of all sizes!


 

What others say about HU...

"This site is the BIBLE for international bike travelers." Greg, Australia

"Thank you! The web site, The travels, The insight, The inspiration, Everything, just thanks." Colin, UK

"My friend and I are planning a trip from Singapore to England... We found (the HU) site invaluable as an aid to planning and have based a lot of our purchases (bikes, riding gear, etc.) on what we have learned from this site." Phil, Australia

"I for one always had an adventurous spirit, but you and Susan lit the fire for my trip and I'll be forever grateful for what you two do to inspire others to just do it." Brent, USA

"Your website is a mecca of valuable information and the (video) series is informative, entertaining, and inspiring!" Jennifer, Canada

"Your worldwide organisation and events are the Go To places to for all serious touring and aspiring touring bikers." Trevor, South Africa

"This is the answer to all my questions." Haydn, Australia

"Keep going the excellent work you are doing for Horizons Unlimited - I love it!" Thomas, Germany

Lots more comments here!



Five books by Graham Field!

Diaries of a compulsive traveller
by Graham Field
Book, eBook, Audiobook

"A compelling, honest, inspiring and entertaining writing style with a built-in feel-good factor" Get them NOW from the authors' website and Amazon.com, Amazon.ca, Amazon.co.uk.



Back Road Map Books and Backroad GPS Maps for all of Canada - a must have!

New to Horizons Unlimited?

New to motorcycle travelling? New to the HU site? Confused? Too many options? It's really very simple - just 4 easy steps!

Horizons Unlimited was founded in 1997 by Grant and Susan Johnson following their journey around the world on a BMW R80G/S.

Susan and Grant Johnson Read more about Grant & Susan's story

Membership - help keep us going!

Horizons Unlimited is not a big multi-national company, just two people who love motorcycle travel and have grown what started as a hobby in 1997 into a full time job (usually 8-10 hours per day and 7 days a week) and a labour of love. To keep it going and a roof over our heads, we run events all over the world with the help of volunteers; we sell inspirational and informative DVDs; we have a few selected advertisers; and we make a small amount from memberships.

You don't have to be a Member to come to an HU meeting, access the website, or ask questions on the HUBB. What you get for your membership contribution is our sincere gratitude, good karma and knowing that you're helping to keep the motorcycle travel dream alive. Contributing Members and Gold Members do get additional features on the HUBB. Here's a list of all the Member benefits on the HUBB.




All times are GMT +1. The time now is 15:40.