ttr600re carb intake manifolds..
 

hi guys..just built myself another ttr600 supermoto from a standard ttr600re..
my carb inlet manifolds have split... I can find plenty of aftermarket manifolds for xt600 etc but none for the ttr..... does anyone know if the xt600e for example manifolds will fit the ttr600 5ch models..... ive been told the carbs on both the xt and ttr models are the same!!
thanks
sean

Kedo lists the same partnumber for theese bikes:

TT600'85-'92,TT600E+S,XT600-'89,XT600Z'85-,XT600E/K'90-'95,XT600E'99...

yes other do also..but not for the ttr600 5ch model..but ive been told carb and engine from the xt600e is the same so have ordered a pair for the xt600e so fingers crossed they will be the same

Let us know if they fit!

they were identical.... being new rubbers were a bit harder to fit the carbs onto but a great seal.... so all is ok

I see Kedo has both a "unrestricted" intake manifold left & right set for xt600e AND one that says "OEM unrestricted".
Do you think the power would be different / better on the unrestricted "not oem" one ?

As long as theyre unrestricted they should give the same power, OEM or not.