+1 size in idle jet
Raise both needles 1 notch (lower the clip)
+1 on both primary jets.
Adjust Co screw.....

this was taken from one of your 2010 posts. Im getting confused as to the various information between differing threads im afraid.

Thats years ago.... Kinda hard to tell that you were referring to that =)

I had to lower both needles again (to stock setting), after a dynorun that showed rich at midrange, same with the mainjets. The bike drove the same, but returned better mpg :)

Sorry bout the confusion,I couldnt 'link' to the original post you made in 2010. Soon as it stops raining i'LL GET THE CARBS OFF AND SEE WHAT SIZE IDLE JET I GOT AND THEN ORDER THE NEXT SIZE UP. aPPRECIATE YOUR PATIENCE AND HELP.

Straight through can and don't do the clamp up too tight ;-)

taken the carb off and apart today. Mainjet is 150 and idle jet is 50. Any guidence on what size(s) to go for would be appreciated.