Horizons Unlimited - The HUBB

Horizons Unlimited - The HUBB (https://www.horizonsunlimited.com/hubb/)

- Yamaha Tech (https://www.horizonsunlimited.com/hubb/yamaha-tech/)

- - Torque setting (https://www.horizonsunlimited.com/hubb/yamaha-tech/torque-setting-30486)

pottsy

8 Nov 2007 19:20

Torque setting

Anyone got the torque setting for an xt600e gearbox sprocket nut... cheers!:mchappy:

Martynbiker

8 Nov 2007 19:41

torque settings

110nm or 80ft Lbs! otherwise known as VERY TIGHT!

make sure the drive chain is on and that some one steps on the rear brake to stop the sprocket moving,put the gearbox in 1st and dont forget to knock over the tab washer and use some blue locktite too......those babies have a habit of falling off!

pottsy

8 Nov 2007 21:28

Cheers for that, FT it is!Now to see if my Torque Wrench actually goes up that far...he, he.

All times are GMT +1. The time now is 15:19.

vB.Sponsors