Go Back   Horizons Unlimited - The HUBB > Technical, Bike forums > Yamaha Tech
Yamaha Tech Originally the Yamaha XT600 Tech Forum, due to demand it now includes all Yamaha's technical / mechanical / repair / preparation questions.
Photo by Daniel Rintz, Himba children, Namibia

The only impossible journey
is the one
you never begin

Photo by Daniel Rintz,
Himba children, Namibia



Like Tree1Likes
  • 1 Post By oldblokeonabike

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 11 Dec 2011
Registered Users
HUBB regular
 
Join Date: Feb 2010
Posts: 64
Thingy at the end of transmission mainshaft?

Can anyone tell me which way the little thing goes into the transmission mainshaft? It's the little thing sticking into the end of the shaft, it's bowl shaped sorta - convex on one side concave on the other. Which side faces out? It's a 34L Tenere. thanks



Last edited by luadraman; 11 Dec 2011 at 02:53.
Reply With Quote
  #2  
Old 11 Dec 2011
Registered Users
HUBB regular
 
Join Date: Feb 2010
Posts: 64
Apologies for huge picture! Don't know yet how to make it smaller!
edit: fixed the pic!

Last edited by luadraman; 11 Dec 2011 at 02:47.
Reply With Quote
  #3  
Old 11 Dec 2011
Registered Users
Veteran HUBBer
 
Join Date: Mar 2011
Location: London
Posts: 105
Have looked in the Clymer 1983 –1989 manual and the “thingy” is most definitely depicted as concave, that is as you have it in the photograph.


My question, did the “thingy” fall out easily or not? Was it loose and drop out? Is there a circlip holding it in place? There is no mention of this “thingy” in the manual that I have read as yet, so far other than in the photographs. So can it be assumed that the end of that shaft which holds the kick-start idle gear ends up in the outer casing?

Hope this helps
Socks
Reply With Quote
  #4  
Old 11 Dec 2011
oothef's Avatar
Registered Users
Veteran HUBBer
 
Join Date: Feb 2010
Location: york
Posts: 265
Looks like a plug to ensure oil feed through the shaft
__________________
Anything can happen in the next half hour
Reply With Quote
  #5  
Old 11 Dec 2011
Registered Users
Veteran HUBBer
 
Join Date: Mar 2011
Location: London
Posts: 105
Quote:
Originally Posted by oothef View Post
Looks like a plug to ensure oil feed through the shaft
I agree with you on this oothef.
I recall reading a rebuild thread somewhere, that in these shafts a build up of dense sludge was discovered, so I’m wondering if Luardaman removed this plug to clean out the shaft. There is a hole in the shaft around where the kick-start idel gear sits so I wonder if that hole is to aid the lubricating of that gear.
Reply With Quote
  #6  
Old 11 Dec 2011
kentfallen's Avatar
Registered Users
Veteran HUBBer
 
Join Date: Jan 2008
Location: Bexhill, East Sussex, England, UK
Posts: 673
Thingy?????:confused1: lol

You should be able to properly identify what this part is called (and it's part number) by downloading a parts manual on this sub-forum above (second sticky down).

Good luck.
__________________
Triumph Bonneville 800 (2004), Yamaha XT600E (1999), Honda XBR500 (1986).

Reply With Quote
  #7  
Old 11 Dec 2011
Registered Users
HUBB regular
 
Join Date: Feb 2010
Posts: 64
Ha ha, thingy is a technical term ya know! I used parts sites that show the exploded views but they don't show the part in question, it's probably not supposed to come out at all. Anyway, when I got the casing off it was at 90 degrees to the way it's supposed to be (ie. not facing in or out) hadn't moved it myself but was pretty sure that wasn't how it fit! Thanks for the help.
Reply With Quote
  #8  
Old 11 Dec 2011
Registered Users
Veteran HUBBer
 
Join Date: Mar 2011
Location: London
Posts: 105
Quote:
Originally Posted by luadraman View Post
Ha ha, thingy is a technical term ya know! I used parts sites that show the exploded views but they don't show the part in question, it's probably not supposed to come out at all. Anyway, when I got the casing off it was at 90 degrees to the way it's supposed to be (ie. not facing in or out) hadn't moved it myself but was pretty sure that wasn't how it fit! Thanks for the help.
?
could this mean that the original "thingy" is pushing up against and beyond what it should on the inside of the thingy that is made of magnisum that is to say the thingy that the original thingy is pressed into is possibly not sitting in the correct alignment within the OK bearing thingy. How? dont know! Missing spacers/washers/circlips/wrong size bearings/has it been rebuilt before?

Whoops just couldent help it honest guv
Reply With Quote
  #9  
Old 12 Dec 2011
Registered Users
HUBB regular
 
Join Date: Dec 2011
Posts: 31
Thingy at the end of transmission mainshaft

Yes, Oohef is correct, it's a welch plug to stop oil running out the shaft & directing through the lubrication holes. Select a socket that slips inside the shaft. Remove plug, (your picture shows it going the correct way) & tap another socket into the plug while it's out of the shaft to swell its diameter slightly. Refit the plug using the selected socket (the one that slips inside the shaft) to tap plug in, keeping it to just below the bevel inside the shaft, approx 2mm. The shaft looks extremely worn & I'd be checking the bearing surfaces.

Cheers, Ron
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 Registered Users and/or Members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Tidying the back end up of XT600E Guest121 Yamaha Tech 4 27 Nov 2011 22:54
Opie Oils - End of Season Reductions oilman The HUBB PUB 0 18 Nov 2011 15:30

 
 

Announcements

Thinking about traveling? Not sure about the whole thing? Watch the HU Achievable Dream Video Trailers and then get ALL the information you need to get inspired and learn how to travel anywhere in the world!

Have YOU ever wondered who has ridden around the world? We did too - and now here's the list of Circumnavigators!
Check it out now
, and add your information if we didn't find you.

Next HU Eventscalendar

HU Event and other updates on the HUBB Forum "Traveller's Advisories" thread.
ALL Dates subject to change.

2024:

Add yourself to the Updates List for each event!

Questions about an event? Ask here

HUBBUK: info

See all event details

 
World's most listened to Adventure Motorbike Show!
Check the RAW segments; Grant, your HU host is on every month!
Episodes below to listen to while you, err, pretend to do something or other...

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

"Ultimate global guide for red-blooded bikers planning overseas exploration. Covers choice & preparation of best bike, shipping overseas, baggage design, riding techniques, travel health, visas, documentation, safety and useful addresses." Recommended. (Grant)



Ripcord Rescue Travel Insurance.

Ripcord Rescue Travel Insurance™ combines into a single integrated program the best evacuation and rescue with the premier travel insurance coverages designed for adventurers.

Led by special operations veterans, Stanford Medicine affiliated physicians, paramedics and other travel experts, Ripcord is perfect for adventure seekers, climbers, skiers, sports enthusiasts, hunters, international travelers, humanitarian efforts, expeditions and more.

Ripcord travel protection is now available for ALL nationalities, and travel is covered on motorcycles of all sizes!


 

What others say about HU...

"This site is the BIBLE for international bike travelers." Greg, Australia

"Thank you! The web site, The travels, The insight, The inspiration, Everything, just thanks." Colin, UK

"My friend and I are planning a trip from Singapore to England... We found (the HU) site invaluable as an aid to planning and have based a lot of our purchases (bikes, riding gear, etc.) on what we have learned from this site." Phil, Australia

"I for one always had an adventurous spirit, but you and Susan lit the fire for my trip and I'll be forever grateful for what you two do to inspire others to just do it." Brent, USA

"Your website is a mecca of valuable information and the (video) series is informative, entertaining, and inspiring!" Jennifer, Canada

"Your worldwide organisation and events are the Go To places to for all serious touring and aspiring touring bikers." Trevor, South Africa

"This is the answer to all my questions." Haydn, Australia

"Keep going the excellent work you are doing for Horizons Unlimited - I love it!" Thomas, Germany

Lots more comments here!



Five books by Graham Field!

Diaries of a compulsive traveller
by Graham Field
Book, eBook, Audiobook

"A compelling, honest, inspiring and entertaining writing style with a built-in feel-good factor" Get them NOW from the authors' website and Amazon.com, Amazon.ca, Amazon.co.uk.



Back Road Map Books and Backroad GPS Maps for all of Canada - a must have!

New to Horizons Unlimited?

New to motorcycle travelling? New to the HU site? Confused? Too many options? It's really very simple - just 4 easy steps!

Horizons Unlimited was founded in 1997 by Grant and Susan Johnson following their journey around the world on a BMW R80G/S.

Susan and Grant Johnson Read more about Grant & Susan's story

Membership - help keep us going!

Horizons Unlimited is not a big multi-national company, just two people who love motorcycle travel and have grown what started as a hobby in 1997 into a full time job (usually 8-10 hours per day and 7 days a week) and a labour of love. To keep it going and a roof over our heads, we run events all over the world with the help of volunteers; we sell inspirational and informative DVDs; we have a few selected advertisers; and we make a small amount from memberships.

You don't have to be a Member to come to an HU meeting, access the website, or ask questions on the HUBB. What you get for your membership contribution is our sincere gratitude, good karma and knowing that you're helping to keep the motorcycle travel dream alive. Contributing Members and Gold Members do get additional features on the HUBB. Here's a list of all the Member benefits on the HUBB.




All times are GMT +1. The time now is 16:21.