Go Back   Horizons Unlimited - The HUBB > Technical, Bike forums > Yamaha Tech
Surprise when taking off the cylinder Surprise when taking off the cylinder
Register FAQ Calendar Today's Posts
Yamaha Tech Originally the Yamaha XT600 Tech Forum, due to demand it now includes all Yamaha's technical / mechanical / repair / preparation questions.
Photo by Ellen Delis, Lagunas Ojos del Campo, Antofalla, Catamarca

I haven't been everywhere...
but it's on my list!


Photo by Ellen Delis,
Lagunas Ojos del Campo,
Antofalla, Catamarca



Like Tree1Likes
  • 1 Post By Grant Johnson

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 14 Apr 2014
Registered Users
HUBB regular
  
Join Date: Jul 2013
Location: Pleasant Hill, CA
Posts: 32
Surprise when taking off the cylinder
I pulled apart my engine because the cam end plug started leaking pretty badly and I knew it needed rings because it burns oil. Other then that the bike was great, a little down on power but would run all day. No horrible noises and once it was warmed up it purred.

I pulled off the head and the piston was sitting halfway and the bore looked better then expected (40k miles). I pulled off the jug anyway and saw this... Wtf is going on here???


Large Version Here

Slight shiny area from piston slap


The piston didn't have any abnormal wear and the rings weren't broken or mangled. The oil ring was a little stuck but that was it, the rest of the engine looks almost brand new internally and the oil is always clean (no glitter). The gunk/water spots are from degreasing it last night.

Is it just really crappy machining from the factory or something worse? There isn't any rod knock and just some minor tapping from the top end when cold which goes away after a few mins.
Reply With Quote
  #2  
Old 14 Apr 2014
Registered Users
HUBB regular
  
Join Date: Jul 2013
Location: Pleasant Hill, CA
Posts: 32
Haha no, I'm just one of the possibly many owners. I put about 18,000 miles on it since I bought it last summer.

I had someone say they look like factory tooling chatter marks, I'd think so too because if the piston did that it would look pretty mangled (plus it's horizontal scoring only). I definitely think someone did a hone and new rings sometime in the past, the top end looked like it had been opened and they managed to strip one of the valve cover bolts in the process.

Either way it's going to get a +1 bore and a new piston. I just hope that I can find a shop to measure it for me, or my digital calipers are accurate enough to see if it's a stock piston or larger. I don't wanna buy a new one that's too small...
Reply With Quote
  #3  
Old 14 Apr 2014
xtrock's Avatar
Registered Users
Veteran HUBBer
  
Join Date: May 2013
Location: Norway
Posts: 1,325
I wonder, cant you buy the inside sleeve and replace you dont have to bore?
Reply With Quote
  #4  
Old 15 Apr 2014
Registered Users
Veteran HUBBer
  
Join Date: Dec 2008
Location: Denmark
Posts: 1,417
Perhaps the piston was siezed at some point? Perhaps the bike was left outside, and the piston/cylinder slightly corroded together..?

Just a guess.
Reply With Quote
  #5  
Old 15 Apr 2014
*Touring Ted*'s Avatar
Contributing Member
Veteran HUBBer
  
Join Date: Jul 2005
Location: Wirral, England.
Posts: 5,656
A re-bore is a lot cheaper than you think....

I don't think you can buy the sleeves for an XT600. I don't know anyone who makes/sells them. Please tell me if you know differently...

I've take the barrel to an engine place and get a re-bore.

Just think of the power increase 0.3HP maybe !!
__________________
Did some trips.
Rode some bikes.
Fix them for a living.
Can't say anymore.
Reply With Quote
  #6  
Old 15 Apr 2014
*Touring Ted*'s Avatar
Contributing Member
Veteran HUBBer
  
Join Date: Jul 2005
Location: Wirral, England.
Posts: 5,656
This website has been going FOREVER it seems. Taught me a lot when I was starting out.

Dan's Motorcycle "Pistons, Cylinders & Rings"
__________________
Did some trips.
Rode some bikes.
Fix them for a living.
Can't say anymore.
Reply With Quote
  #7  
Old 15 Apr 2014
xtrock's Avatar
Registered Users
Veteran HUBBer
  
Join Date: May 2013
Location: Norway
Posts: 1,325
Yamaha Tenere 600 95 98mm Wiseco Cylinder Sleeve 84 96 | eBay

http://www.ebay.com/itm/Wiseco-Cylin...cadbdf&vxp=mtr
Reply With Quote
  #8  
Old 15 Apr 2014
*Touring Ted*'s Avatar
Contributing Member
Veteran HUBBer
  
Join Date: Jul 2005
Location: Wirral, England.
Posts: 5,656
Great news..... Cheap too.

Last sleeve I had changed only cost me £100. And you can just use stock piston/rings too.
__________________
Did some trips.
Rode some bikes.
Fix them for a living.
Can't say anymore.
Reply With Quote
  #9  
Old 15 Apr 2014
xtrock's Avatar
Registered Users
Veteran HUBBer
  
Join Date: May 2013
Location: Norway
Posts: 1,325
Yes i think its a good deal, specally for people that dont have anyone near that can rebore.
Reply With Quote
  #10  
Old 15 Apr 2014
*Touring Ted*'s Avatar
Contributing Member
Veteran HUBBer
  
Join Date: Jul 2005
Location: Wirral, England.
Posts: 5,656
Quote:
Originally Posted by xtrock View Post
Yes i think its a good deal, specally for people that dont have anyone near that can rebore.
Changing a sleeve is no easy task without a good puller and a BIG press though either.

I've not ever bothered myself..

I've known people to chisel out the old sleeve...
__________________
Did some trips.
Rode some bikes.
Fix them for a living.
Can't say anymore.
Reply With Quote
  #11  
Old 15 Apr 2014
Registered Users
Veteran HUBBer
  
Join Date: Dec 2008
Location: Denmark
Posts: 1,417
KEDO - Performance Products has sleeves aswell. They have the up to 98mm sleeve, and a bigbore aswell
Reply With Quote
  #12  
Old 15 Apr 2014
Registered Users
HUBB regular
  
Join Date: Jul 2013
Location: Pleasant Hill, CA
Posts: 32
Boring it is going to be the more cost effective route for me, I was getting quotes for ~$60 including honing. A ProX piston is about $100 and then I'll be replacing the rear spring for a hyperpro, a bunch of leaky o-rings, gaskets and regular maintenance stuff.

I was thinking about the JE piston but 11.5:1 seems too high, I'd rather have the bike be reliable. Plus it would need cams, better carbs, etc and I'd rather just use that for putting towards my 1190 Adventure dream bike
Reply With Quote
  #13  
Old 15 Apr 2014
Grant Johnson's Avatar
HU Founder
Veteran HUBBer
  
Join Date: Dec 1997
Location: BC Canada
Posts: 7,226
A friend of mine who has done a million or so bore jobs says:

"Marks look like cutter chatter from a previous bore job, maybe in a back yard in India? 0.2 on 1-10 scale."

So the bad news is it may already be on the first oversize. Check the top of the piston, usually will have a size stamp if oversize.
__________________
Grant Johnson
Seek, and ye shall find.
------------------------
Inspiring, Informing and Connecting travellers since 1997!
www.HorizonsUnlimited.com
Reply With Quote
  #14  
Old 15 Apr 2014
*Touring Ted*'s Avatar
Contributing Member
Veteran HUBBer
  
Join Date: Jul 2005
Location: Wirral, England.
Posts: 5,656
You could also hone that smooth then measure it... Then check a manual for the piston clearance.. You might be okay with standard piston and oversized rings... New sleeve is the best long term solution and as your already doing a rebuild I think its worth the extra hundred ...
__________________
Did some trips.
Rode some bikes.
Fix them for a living.
Can't say anymore.
Reply With Quote
  #15  
Old 17 Apr 2014
Registered Users
HUBB regular
  
Join Date: Jul 2013
Location: Pleasant Hill, CA
Posts: 32
I got the cylinder measured and it's at 95.6mm. It's an odd size to be at but the machinist said at least it's straight. I'll be getting a 96mm ProX piston and getting it bored and honed next week.
Reply With Quote
Reply

« Previous Thread | Next Thread »

Currently Active Users Viewing This Thread: 1 (0 Registered Users and/or Members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Clutch cylinder fun! nomadic Light Overland Vehicle Tech 1 12 Oct 2013 15:45
XT600E 120psi cylinder compression -ralph- Yamaha Tech 7 21 Sep 2013 02:37
XT 600E Glazed Cylinder Sleeve RCerrie Yamaha Tech 7 21 May 2013 17:12
R1200GS Cylinder Head Stud Ekke BMW Tech 2 4 Sep 2012 13:10
Cylinder Corrosion on a BMW1150GSA Peckham BMW Tech 2 14 Feb 2012 01:57

 
 

Announcements

Thinking about traveling? Not sure about the whole thing? Watch the HU Achievable Dream Video Trailers and then get ALL the information you need to get inspired and learn how to travel anywhere in the world!

Have YOU ever wondered who has ridden around the world? We did too - and now here's the list of Circumnavigators!
Check it out now, and add your information if we didn't find you.

Next HU Eventscalendar

HU Event and other updates on the HUBB Forum "Traveller's Advisories" thread.
ALL Dates subject to change.

2024:

Add yourself to the Updates List for each event!

Questions about an event? Ask here

HUBBUK: info

See all event details

 
World's most listened to Adventure Motorbike Show!
Check the RAW segments; Grant, your HU host is on every month!
Episodes below to listen to while you, err, pretend to do something or other...

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

"Ultimate global guide for red-blooded bikers planning overseas exploration. Covers choice & preparation of best bike, shipping overseas, baggage design, riding techniques, travel health, visas, documentation, safety and useful addresses." Recommended. (Grant)



Ripcord Rescue Travel Insurance.

Ripcord Rescue Travel Insurance™ combines into a single integrated program the best evacuation and rescue with the premier travel insurance coverages designed for adventurers.

Led by special operations veterans, Stanford Medicine affiliated physicians, paramedics and other travel experts, Ripcord is perfect for adventure seekers, climbers, skiers, sports enthusiasts, hunters, international travelers, humanitarian efforts, expeditions and more.

Ripcord travel protection is now available for ALL nationalities, and travel is covered on motorcycles of all sizes!


 

What others say about HU...

"This site is the BIBLE for international bike travelers." Greg, Australia

"Thank you! The web site, The travels, The insight, The inspiration, Everything, just thanks." Colin, UK

"My friend and I are planning a trip from Singapore to England... We found (the HU) site invaluable as an aid to planning and have based a lot of our purchases (bikes, riding gear, etc.) on what we have learned from this site." Phil, Australia

"I for one always had an adventurous spirit, but you and Susan lit the fire for my trip and I'll be forever grateful for what you two do to inspire others to just do it." Brent, USA

"Your website is a mecca of valuable information and the (video) series is informative, entertaining, and inspiring!" Jennifer, Canada

"Your worldwide organisation and events are the Go To places to for all serious touring and aspiring touring bikers." Trevor, South Africa

"This is the answer to all my questions." Haydn, Australia

"Keep going the excellent work you are doing for Horizons Unlimited - I love it!" Thomas, Germany

Lots more comments here!



Five books by Graham Field!

Diaries of a compulsive traveller
by Graham Field
Book, eBook, Audiobook

"A compelling, honest, inspiring and entertaining writing style with a built-in feel-good factor" Get them NOW from the authors' website and Amazon.com, Amazon.ca, Amazon.co.uk.



Back Road Map Books and Backroad GPS Maps for all of Canada - a must have!

Your ad could be here, on EVERY page of the HUBB, or the whole website, or as many as you like!

New to Horizons Unlimited?

New to motorcycle travelling? New to the HU site? Confused? Too many options? It's really very simple - just 4 easy steps!

Horizons Unlimited was founded in 1997 by Grant and Susan Johnson following their journey around the world on a BMW R80G/S.

Susan and Grant Johnson Read more about Grant & Susan's story

Membership - help keep us going!

Horizons Unlimited is not a big multi-national company, just two people who love motorcycle travel and have grown what started as a hobby in 1997 into a full time job (usually 8-10 hours per day and 7 days a week) and a labour of love. To keep it going and a roof over our heads, we run events all over the world with the help of volunteers; we sell inspirational and informative DVDs; we have a few selected advertisers; and we make a small amount from memberships.

You don't have to be a Member to come to an HU meeting, access the website, or ask questions on the HUBB. What you get for your membership contribution is our sincere gratitude, good karma and knowing that you're helping to keep the motorcycle travel dream alive. Contributing Members and Gold Members do get additional features on the HUBB. Here's a list of all the Member benefits on the HUBB.



All times are GMT +1. The time now is 08:56.

Contact Us - Horizons Unlimited Motorcycle Travellers Website - Archive - Privacy Statement - Top