stainless downpipes
 

hi still looking for stainless downpipes for my xt60043f 1985 .do,s anybody know if tt600re 2004 pipes fit my xt and will line up with a standard rear yamaha silencer . ive been told some tt600,s fit if cut down . has anybody fitted tt600re pipes to a standard 43f . many thanks for reading this and any replies ,this is a great site with lots of useful info.:thumbup1: take care zigzag

Hi,
I fitted the Motad offering to my '88 Tenere, and their site shows them still available:
Motad
They are silver, rather than my original's black coating.
I ordered them from a small local motorcycle shop (MoT/Servicing/Secondhand bike sales), so guess you can order them locally also (and save P&P)....
Hope this helps?
Geoff

Hej,
you can use the downpipe of the TT600S (Belgarda) models, but you will have to cut it.
I use this pipe on my XT600Z 3AJ. The diameter will fit to the original exhaust.
I can´t give any advise regarding the TT600R downpipes.

Keep the XT alive!

stainless downpipes
 

hi thanks for the repleys ,i was looking at some 2004 tt600re downpipes on e,bay but thay sold for a little more than i hoped ,with out been sure thay would line up with my silenser i did not wont to risk it . somebody seid tt -ttr pipes fit if shortened 5-6 cm ,but on the e,bay photo this looked close to the bend .all the manifold ends seem the same , just the conection to the silenser, ie lining up sq on . i,ll check out the belgardo pipe if i can thanks again. zig zag

This company might be able to sort something

stainless steel car and motorcycle exhausts - YAMAHA XT600 (3TB1-7) ALL SINGLE HANGER SILENCER MODELS 1990-4 STAINLESS STEEL FRONT PIPEWORK ONLY