Go Back   Horizons Unlimited - The HUBB > Technical, Bike forums > Yamaha Tech
Yamaha Tech Originally the Yamaha XT600 Tech Forum, due to demand it now includes all Yamaha's technical / mechanical / repair / preparation questions.
Photo by Daniel Rintz, Himba children, Namibia

The only impossible journey
is the one
you never begin

Photo by Daniel Rintz,
Himba children, Namibia



Like Tree1Likes
  • 1 Post By Walkabout

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 20 Feb 2012
Registered Users
Veteran HUBBer
 
Join Date: Dec 2009
Location: Birmingham, UK
Posts: 126
XT600E Cutting out under acceleration

Only seems to do it under acceleration, engine stops firing dead, usually about 5000 revs. Once you've lost 20 mph and a couple of thousand revs (if your lucky) it bursts very suddenly back into life.

No splutter cough or hesitation, it seems electrical, on/off like a switch.

Any ideas what it could be?

Thanks
Reply With Quote
  #2  
Old 21 Feb 2012
Contributing Member
Veteran HUBBer
 
Join Date: Aug 2008
Location: Germany
Posts: 141
Suspicious #1: Sidestand switch. Disconnect it from harness and connect the two wires from the main harness. Good luck.
Reply With Quote
  #3  
Old 21 Feb 2012
Registered Users
HUBB regular
 
Join Date: Sep 2011
Posts: 39
clean out the carb aswell.cheers
Reply With Quote
  #4  
Old 21 Feb 2012
*Touring Ted*'s Avatar
Contributing Member
Veteran HUBBer
 
Join Date: Jul 2005
Location: Wirral, England.
Posts: 5,654
This sounds EXACTLY like the problem I had with my 600E.

In the carb, under the float valve, there is a little fine fuel filter. This gets clogged up and stops the carb filling up with enough fuel to accelerate.

It should be checked/cleaned anyway so definitely check it out as it's an easy fix.
__________________
Did some trips.
Rode some bikes.
Fix them for a living.
Can't say anymore.
Reply With Quote
  #5  
Old 21 Feb 2012
Registered Users
Veteran HUBBer
 
Join Date: Mar 2007
Location: UK
Posts: 4,343
Quote:
Originally Posted by *Touring Ted* View Post
This sounds EXACTLY like the problem I had with my 600E.

In the carb, under the float valve, there is a little fine fuel filter. This gets clogged up and stops the carb filling up with enough fuel to accelerate.

It should be checked/cleaned anyway so definitely check it out as it's an easy fix.
It's the same on the TT600R - it is a tiny thing that doesn't have much surface area, hence the clogging.
Ditch it and fit an inline fuel filter upstream of the carb. is a good solution.
__________________
Dave
Reply With Quote
  #6  
Old 22 Feb 2012
Registered Users
Veteran HUBBer
 
Join Date: Dec 2009
Location: Birmingham, UK
Posts: 126
Thanks folks. I've posted on a couple of other forums too, and the carbs do seem to be a reoccurring theme, though over on the ABR forum people are pointing at the secondary carb not the filter.

I am reading about the YDIS carbs as I'm not really sure I understand exactly how they work and how the secondary carb is bought into operation (I assume it's intake vacuum pressure?). As I understand it it's basically a standard CV carb, with an SU carb (the only one of those I've ever stripped was an Austin Maestro!) bolted to the side?

I've plenty of time to learn, etc, because the bikes for me are toys and I have two cars. I'm soon to move house and my next few weekends will be taken up with packing and moving, then by the time I've got that over with, I'll be getting my Triumph Daytona out of hibernation for summer, so the XT is going to sit in the garage for a couple of months until I get time to look at it.
Reply With Quote
  #7  
Old 22 Feb 2012
*Touring Ted*'s Avatar
Contributing Member
Veteran HUBBer
 
Join Date: Jul 2005
Location: Wirral, England.
Posts: 5,654
Quote:
Originally Posted by -ralph- View Post
Thanks folks. I've posted on a couple of other forums too, and the carbs do seem to be a reoccurring theme, though over on the ABR forum people are pointing at the secondary carb not the filter.

I am reading about the YDIS carbs as I'm not really sure I understand exactly how they work and how the secondary carb is bought into operation (I assume it's intake vacuum pressure?). As I understand it it's basically a standard CV carb, with an SU carb (the only one of those I've ever stripped was an Austin Maestro!) bolted to the side?

I've plenty of time to learn, etc, because the bikes for me are toys and I have two cars. I'm soon to move house and my next few weekends will be taken up with packing and moving, then by the time I've got that over with, I'll be getting my Triumph Daytona out of hibernation for summer, so the XT is going to sit in the garage for a couple of months until I get time to look at it.
Yeah it could be the secondary. If I remember correctly the second carb opens under vacuum pressure. Check all the little rubber hoses don't have any holes in them.

Also, there is a rubber diaphragm in the carb which may be in poor shape.

You should be able to lift the carb plungers up with your finger and they should fall back to their resting position smoothly..
__________________
Did some trips.
Rode some bikes.
Fix them for a living.
Can't say anymore.
Reply With Quote
  #8  
Old 26 Feb 2012
Registered Users
New on the HUBB
 
Join Date: Apr 2003
Location: UK
Posts: 9
Cutting out

It may also be worth checking the carb inlet manifold as the rubber sleave tends to part company with the aluminium base, this allows air to be drawn in through the split rarther than the carbs (worse at high revs), take a close look it is often not obvious.
Reply With Quote
  #9  
Old 26 Feb 2012
Registered Users
Veteran HUBBer
 
Join Date: Mar 2007
Location: UK
Posts: 4,343
Quote:
Originally Posted by -ralph- View Post
so the XT is going to sit in the garage for a couple of months until I get time to look at it.
You have time on your side so I suggest you download the manual for this bike which is available in a sticky at the top of this forum.

I used a similar manual for the TT600R when I owned one of them and it is amazing how much I have forgotten!
The workshop manual is a great read &
__________________
Dave
Reply With Quote
  #10  
Old 26 Feb 2012
Registered Users
Veteran HUBBer
 
Join Date: Dec 2009
Location: Birmingham, UK
Posts: 126
Yep, already got it thanks mate.

What I'm not sure I have is an up to date wiring diagram. The one I downloaded when I got the bike shows shows a CDI unit, mine will have a TCI unit.
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 Registered Users and/or Members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
XT600e Valve Stem Seals??? RCerrie Yamaha Tech 7 23 Jan 2012 23:41
XT600E - low top speed question?? boduzafa Yamaha Tech 1 10 Nov 2011 21:47

 
 

Announcements

Thinking about traveling? Not sure about the whole thing? Watch the HU Achievable Dream Video Trailers and then get ALL the information you need to get inspired and learn how to travel anywhere in the world!

Have YOU ever wondered who has ridden around the world? We did too - and now here's the list of Circumnavigators!
Check it out now
, and add your information if we didn't find you.

Next HU Eventscalendar

HU Event and other updates on the HUBB Forum "Traveller's Advisories" thread.
ALL Dates subject to change.

2024:

Add yourself to the Updates List for each event!

Questions about an event? Ask here

HUBBUK: info

See all event details

 
World's most listened to Adventure Motorbike Show!
Check the RAW segments; Grant, your HU host is on every month!
Episodes below to listen to while you, err, pretend to do something or other...

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

"Ultimate global guide for red-blooded bikers planning overseas exploration. Covers choice & preparation of best bike, shipping overseas, baggage design, riding techniques, travel health, visas, documentation, safety and useful addresses." Recommended. (Grant)



Ripcord Rescue Travel Insurance.

Ripcord Rescue Travel Insurance™ combines into a single integrated program the best evacuation and rescue with the premier travel insurance coverages designed for adventurers.

Led by special operations veterans, Stanford Medicine affiliated physicians, paramedics and other travel experts, Ripcord is perfect for adventure seekers, climbers, skiers, sports enthusiasts, hunters, international travelers, humanitarian efforts, expeditions and more.

Ripcord travel protection is now available for ALL nationalities, and travel is covered on motorcycles of all sizes!


 

What others say about HU...

"This site is the BIBLE for international bike travelers." Greg, Australia

"Thank you! The web site, The travels, The insight, The inspiration, Everything, just thanks." Colin, UK

"My friend and I are planning a trip from Singapore to England... We found (the HU) site invaluable as an aid to planning and have based a lot of our purchases (bikes, riding gear, etc.) on what we have learned from this site." Phil, Australia

"I for one always had an adventurous spirit, but you and Susan lit the fire for my trip and I'll be forever grateful for what you two do to inspire others to just do it." Brent, USA

"Your website is a mecca of valuable information and the (video) series is informative, entertaining, and inspiring!" Jennifer, Canada

"Your worldwide organisation and events are the Go To places to for all serious touring and aspiring touring bikers." Trevor, South Africa

"This is the answer to all my questions." Haydn, Australia

"Keep going the excellent work you are doing for Horizons Unlimited - I love it!" Thomas, Germany

Lots more comments here!



Five books by Graham Field!

Diaries of a compulsive traveller
by Graham Field
Book, eBook, Audiobook

"A compelling, honest, inspiring and entertaining writing style with a built-in feel-good factor" Get them NOW from the authors' website and Amazon.com, Amazon.ca, Amazon.co.uk.



Back Road Map Books and Backroad GPS Maps for all of Canada - a must have!

New to Horizons Unlimited?

New to motorcycle travelling? New to the HU site? Confused? Too many options? It's really very simple - just 4 easy steps!

Horizons Unlimited was founded in 1997 by Grant and Susan Johnson following their journey around the world on a BMW R80G/S.

Susan and Grant Johnson Read more about Grant & Susan's story

Membership - help keep us going!

Horizons Unlimited is not a big multi-national company, just two people who love motorcycle travel and have grown what started as a hobby in 1997 into a full time job (usually 8-10 hours per day and 7 days a week) and a labour of love. To keep it going and a roof over our heads, we run events all over the world with the help of volunteers; we sell inspirational and informative DVDs; we have a few selected advertisers; and we make a small amount from memberships.

You don't have to be a Member to come to an HU meeting, access the website, or ask questions on the HUBB. What you get for your membership contribution is our sincere gratitude, good karma and knowing that you're helping to keep the motorcycle travel dream alive. Contributing Members and Gold Members do get additional features on the HUBB. Here's a list of all the Member benefits on the HUBB.




All times are GMT +1. The time now is 22:51.