Go Back   Horizons Unlimited - The HUBB > Technical, Bike forums > Yamaha Tech
Yamaha Tech Originally the Yamaha XT600 Tech Forum, due to demand it now includes all Yamaha's technical / mechanical / repair / preparation questions.
Photo by Daniel Rintz, Himba children, Namibia

The only impossible journey
is the one
you never begin

Photo by Daniel Rintz,
Himba children, Namibia



Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 19 Jan 2005
Registered Users
New on the HUBB
 
Join Date: Jan 2005
Location: london,england
Posts: 5
4pt into 3aj questions

hello
after months of reading this forum, i have bought a worn out 3aj (complete with touratechs, spares, extra tanks etc). then i managed to get a stolen recovered 4pt with 5000miles at a very reasonable price.
now my plan is to transfer as much as possible from the 4pt to the 3aj. ie. the complete motor and wiring loom

questions i have are:

-which has the better front end, in terms of suspension, brakes, rims- or what would br the best combination?

-which is the better rear shock?

-should i just keep the 3aj carbs and settings as airbox and exhaust will be the same?

-is there a downloadable 4pt wiring diagramme anywhere?

-are cables interchangeable? they appear the same

-are there any modifications i should make to the 4pt motor or loom?

-does anyone have any sage advice for a mechanically inept novice?


many thanks in advance
Reply With Quote
  #2  
Old 19 Jan 2005
Registered Users
New on the HUBB
 
Join Date: Jan 2005
Location: london,england
Posts: 5
sorry, didn't mean to post twice!
Reply With Quote
  #3  
Old 20 Jan 2005
Registered Users
Veteran HUBBer
 
Join Date: Feb 2004
Location: Toulouse, France
Posts: 216
Hi

4PT engine is good though gear demultiplication
less suitable for serious desert "offroad", but good and reliable.
Keep 3AJ airbox + carbs if you can
Rim on 3AJ is 1.60x21 front and 1.85x21 front on 4PT
I think 4PT rim is somewhat weaker than 3AJ rim
THOUGH 3AJ FRONT RIM IS NOT EXCELLLENT EITHER? ESPECIALLY THE SPOKES ON AN OLD ONE; best you can do is to respoke the 3AJ rim with 3.5mm steel spokes, don't drill to get 4.0 mm spokes, in that case go for excel rims diretly
1.85x21 if you want for easier mounting of a 90/90x21 tyre.
Keep the 3AJ kayaba forks, they're very good and the airspring is usefull.
Change your steering bearings! buy lower one original and upper from industrial supplier, buy "timken" one it's great.
4PT is TCI ignition, so you'll have to think over all the electrical modifications on the bike!

Good luck & post a picture when done cause I'll
be interested in seeing it

Matt
Reply With Quote
  #4  
Old 20 Jan 2005
Registered Users
HUBB regular
 
Join Date: Jan 2003
Location: Salzburg
Posts: 76
Hi, wiring diagrams for most models at:-

www.xt600.de/xt_werkstatt/+technische-referenz/-schaltplan/index.htm

More info on changing engines between models:-

www.xt600.de/xt_werkstatt/+technische-referenz/-motorwechsel/index.htm


Cheers Fish.
Reply With Quote
  #5  
Old 20 Jan 2005
KlausXT600's Avatar
Registered Users
Veteran HUBBer
 
Join Date: Sep 2000
Location: Hamburg, Germany
Posts: 295
i use a 4pt engine in one of my 1VJs since some years.
from the 4pt, you should use the engine, ignition, wiring and maybe some switches.
the 4pt front brake is better than the 3AJ one, but to use it, you have to combine lower part of 4pt front fork with upper part & springs from 3AJ (don't know the english name).
for the rest, stay with 3AJ parts.
there is more information in previous postings (rikard the swede).
if you have enough money, change fork springs to white power, and rear suspension to öhlins.

regards
klaus
xt600.de / tech. dep.
Reply With Quote
  #6  
Old 22 Jan 2005
Registered Users
New on the HUBB
 
Join Date: Jan 2005
Location: london,england
Posts: 5
thanks everyone,

i have just dismantled the 4pt completely and it seems that the best option (for me) is to swap the complete loom inc. all switches, relays, switchgear etc. electrics have always been a mystery to me. i'm not even sure what all the boxes on the loom do.
regards to front wheel: should i get the 3aj rim laced to the 4pt hub with better spokes and then combine the forks as suggested. i take it that the 3aj shock is best. cannot afford ohlins or whitepower

thanks again
mark
Reply With Quote
  #7  
Old 23 Jan 2005
Registered Users
Veteran HUBBer
 
Join Date: Feb 2004
Location: Toulouse, France
Posts: 216
Hi again,

Be sure to find a good wheel builder, many say they can do the job and many do a not perfect job.
When respoked, the wheel must be well equilibrated with spokes equally tightened and hub perfectly in the middle.
If you go to the bad person, you'll waste some money.

If you have some extra pennies, take the excel rim front with 4,0 mm spokes, keep rear original, you'll be on the safe side if heavy loaded when riding.

Rear schock from 3AJ is good if not worn out, otherwise prefer the younger 4PT one if it suits, or combine strongest spring with freshest schock.

Matt

[This message has been edited by Matt595 (edited 23 January 2005).]
Reply With Quote
  #8  
Old 27 Jan 2005
Registered Users
New on the HUBB
 
Join Date: Jan 2005
Location: london,england
Posts: 5
thanks matt
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 Registered Users and/or Members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


 
 

Announcements

Thinking about traveling? Not sure about the whole thing? Watch the HU Achievable Dream Video Trailers and then get ALL the information you need to get inspired and learn how to travel anywhere in the world!

Have YOU ever wondered who has ridden around the world? We did too - and now here's the list of Circumnavigators!
Check it out now
, and add your information if we didn't find you.

Next HU Eventscalendar

HU Event and other updates on the HUBB Forum "Traveller's Advisories" thread.
ALL Dates subject to change.

2024:

Add yourself to the Updates List for each event!

Questions about an event? Ask here

HUBBUK: info

See all event details

 
World's most listened to Adventure Motorbike Show!
Check the RAW segments; Grant, your HU host is on every month!
Episodes below to listen to while you, err, pretend to do something or other...

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

"Ultimate global guide for red-blooded bikers planning overseas exploration. Covers choice & preparation of best bike, shipping overseas, baggage design, riding techniques, travel health, visas, documentation, safety and useful addresses." Recommended. (Grant)



Ripcord Rescue Travel Insurance.

Ripcord Rescue Travel Insurance™ combines into a single integrated program the best evacuation and rescue with the premier travel insurance coverages designed for adventurers.

Led by special operations veterans, Stanford Medicine affiliated physicians, paramedics and other travel experts, Ripcord is perfect for adventure seekers, climbers, skiers, sports enthusiasts, hunters, international travelers, humanitarian efforts, expeditions and more.

Ripcord travel protection is now available for ALL nationalities, and travel is covered on motorcycles of all sizes!


 

What others say about HU...

"This site is the BIBLE for international bike travelers." Greg, Australia

"Thank you! The web site, The travels, The insight, The inspiration, Everything, just thanks." Colin, UK

"My friend and I are planning a trip from Singapore to England... We found (the HU) site invaluable as an aid to planning and have based a lot of our purchases (bikes, riding gear, etc.) on what we have learned from this site." Phil, Australia

"I for one always had an adventurous spirit, but you and Susan lit the fire for my trip and I'll be forever grateful for what you two do to inspire others to just do it." Brent, USA

"Your website is a mecca of valuable information and the (video) series is informative, entertaining, and inspiring!" Jennifer, Canada

"Your worldwide organisation and events are the Go To places to for all serious touring and aspiring touring bikers." Trevor, South Africa

"This is the answer to all my questions." Haydn, Australia

"Keep going the excellent work you are doing for Horizons Unlimited - I love it!" Thomas, Germany

Lots more comments here!



Five books by Graham Field!

Diaries of a compulsive traveller
by Graham Field
Book, eBook, Audiobook

"A compelling, honest, inspiring and entertaining writing style with a built-in feel-good factor" Get them NOW from the authors' website and Amazon.com, Amazon.ca, Amazon.co.uk.



Back Road Map Books and Backroad GPS Maps for all of Canada - a must have!

New to Horizons Unlimited?

New to motorcycle travelling? New to the HU site? Confused? Too many options? It's really very simple - just 4 easy steps!

Horizons Unlimited was founded in 1997 by Grant and Susan Johnson following their journey around the world on a BMW R80G/S.

Susan and Grant Johnson Read more about Grant & Susan's story

Membership - help keep us going!

Horizons Unlimited is not a big multi-national company, just two people who love motorcycle travel and have grown what started as a hobby in 1997 into a full time job (usually 8-10 hours per day and 7 days a week) and a labour of love. To keep it going and a roof over our heads, we run events all over the world with the help of volunteers; we sell inspirational and informative DVDs; we have a few selected advertisers; and we make a small amount from memberships.

You don't have to be a Member to come to an HU meeting, access the website, or ask questions on the HUBB. What you get for your membership contribution is our sincere gratitude, good karma and knowing that you're helping to keep the motorcycle travel dream alive. Contributing Members and Gold Members do get additional features on the HUBB. Here's a list of all the Member benefits on the HUBB.




All times are GMT +1. The time now is 17:48.