|
Screen for XT 600 E
Hi all
Here is my new windscreen : http://imagizer.imageshack.us/v2/640...0/835/7ll1.jpg http://imagizer.imageshack.us/v2/640x480q90/28/r7ov.jpg http://imagizer.imageshack.us/v2/640x480q90/17/byu9.jpg it's a screen for a BMW 650 Dakar (Single cilinder model 2000-03) http://imagizer.imageshack.us/v2/640...0/690/zwmv.jpg http://imagizer.imageshack.us/v2/640...0/163/6rxv.jpg http://imagizer.imageshack.us/v2/640...0/853/vx0v.jpg Just drilled the headlight cowl and hold it with 3 5mm bolt's and some rubber washers and bolts http://imagizer.imageshack.us/v2/640x480q90/19/nmhz.jpg http://imagizer.imageshack.us/v2/640...0/853/vx0v.jpg Still need to relocate the blinkers as they foul the screen in the original positon what you think ??? |
Looks good... Lucky fit.
I wonder if one will fit my Dominator and XR650L bier |
|
75.. Ouch. I'll be scouring the second hand market ;)
Sent from my XT1032 using Tapatalk |
One of the best mods for windscreen that i have seen!
Bravooo! |
Pretty fly. Might just copy it if you don't mind :)
when I get past my issues with the starter relay that is :) cheers |
update
It works !!!
Here is the final look with turn signals mounted http://imagizer.imageshack.us/v2/640x480q90/42/x1hw.jpg These are the brackets that I made to hold the screen and to reposition the turn signals, the curved bit is for clearing the front brake pipe : http://imagizer.imageshack.us/v2/640...0/836/wz59.jpg http://imagizer.imageshack.us/v2/640...0/580/53z1.jpg http://imagizer.imageshack.us/v2/640...0/194/g2fp.jpg http://imagizer.imageshack.us/v2/640x480q90/36/vztu.jpg http://imagizer.imageshack.us/v2/640...0/811/nrq9.jpg http://imagizer.imageshack.us/v2/640...0/844/ogdt.jpg http://imagizer.imageshack.us/v2/640x480q90/46/sxib.jpg http://imagizer.imageshack.us/v2/640x480q90/36/n695.jpg Still need to paint them black and paint the screw heads black also As for performance, this weekend we had 15ºC and a sunny day and so I went for a spin , and while it's no Goldwing,it does work, you feel much less wind pressure on the chest area, and the stream flow of air is just a bit to high for me (i'm about 180 cm tall) so I think I will lower it and/or tilt it back a bit As for now i'm happy with it, and looking at the bike without the screen now, seams strange . Nuno |
Screen from OZ
Found this in Australia, about $130.00
http://www.screensforbikes.com/shop/...t-600-e-96-03/ 15 minute install. Thoughts? |
| All times are GMT +1. The time now is 20:21. |