Go Back   Horizons Unlimited - The HUBB > Technical, Bike forums > Yamaha Tech
Yamaha Tech Originally the Yamaha XT600 Tech Forum, due to demand it now includes all Yamaha's technical / mechanical / repair / preparation questions.
Photo by Daniel Rintz, Himba children, Namibia

The only impossible journey
is the one
you never begin

Photo by Daniel Rintz,
Himba children, Namibia



Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 12 Nov 2002
Contributing Member
Veteran HUBBer
 
Join Date: Aug 2002
Posts: 284
Noisy Tappits

I have an '88 3AJ and have set the tappits to .10mm inlet and .13mm outlet (as per the CLymer manual), but the tappits are still relatively noisy.

They are however not any noisier than my '83 Honda XL500, which has been going happily for years.

But then again my XL is not going to travel through the Sahara, so can anyone advise me as to wether I should be concerned about the noise or not? (Fred?)

Reply With Quote
  #2  
Old 13 Nov 2002
Registered Users
HUBB regular
 
Join Date: Jun 2002
Location: London, UK
Posts: 49
Hi Geoff,
Mine are pretty noisy most of the time too. Mine's a 1VJ though but I reckon they are just noisy tappits.

I wouldn't be too worried about it ! ... but it will be interesting to hear what others reckon,

cheers,

Simon
__________________
Simon
Reply With Quote
  #3  
Old 13 Nov 2002
POB/London's Avatar
Registered Users
Veteran HUBBer
 
Join Date: Jul 2002
Location: London / IOW
Posts: 486
So what do noisy tappets sound like? Slightly metallic, from the top end (a bit like a knocking, esp. at idle)? If so, my 3AJ has them too!
__________________
=-=-= ON THE EDGE! =-=-=
My XR650L Pan-Med Expedition Site!

Reply With Quote
  #4  
Old 13 Nov 2002
Contributing Member
Veteran HUBBer
 
Join Date: Aug 2002
Posts: 284
SOmething like that Lewis,
a bit like.... kluk,kluk,kluk,
especially on startup when the oil hasn't been pumped up to the top end yet.

I must admit though, if I'm not listening for the noise I don't hear it.

Geoff
Reply With Quote
  #5  
Old 13 Nov 2002
Registered Users
Veteran HUBBer
 
Join Date: Aug 2002
Location: Hendrik Ido Ambacht, Holland
Posts: 360
Don't worry too much about this, wait until the engine is warm, put on your helmet and start riding. If you still hear the noise, start worrying.
One thing to watch though are the valve stem tops. They have a hardened flat surface, but when this is gone, your valve adjusting bolts will round them. Then it's impossible to adjust the valves properly. In other words your feeler gauges won't give you correct info.

------------------
Fred, XTZ660, Holland.
__________________
Fred, XTZ660, Holland.
Reply With Quote
  #6  
Old 15 Nov 2002
Contributing Member
Veteran HUBBer
 
Join Date: Aug 2002
Posts: 284
Wooops,
time to start worrying then.

I drove my bike to work today and could hear the tappits clearly through my helmet.

The best way to describe the noise is as Lewis said, a metallic ticking, which, at about 4000 revs sounds almost like a metallic purr, except more pronounced.

So what are the causes Fred?
Worn valve stem tops as you said,
worn rockers, or do the valves need reseating?

What damage can this cause to the engine and how quickly?

Geoff
Reply With Quote
  #7  
Old 15 Nov 2002
Registered Users
Veteran HUBBer
 
Join Date: Aug 2002
Location: Hendrik Ido Ambacht, Holland
Posts: 360

I would check the timing chain tension first.
Remove the chain tensioner and look how many splines there are left to be used. Note : the last 5 or so will not be engaged automatically by the spring, if you only have a few left, try to push the tensioner forward 1 spline, then mount and start the engine.
Success,

------------------
Fred, XTZ660, Holland.
__________________
Fred, XTZ660, Holland.
Reply With Quote
  #8  
Old 16 Nov 2002
Registered Users
HUBB regular
 
Join Date: Jun 2002
Location: London, UK
Posts: 49
Hi Geoff,

I'm doing some work on my 1vj this Saturday. If you fancy riding your Tenere over and having a cup of T and chat you're welcome. It would be interesting to hear your engine.

Give us a call,
cheers


Simon
__________________
Simon
Reply With Quote
  #9  
Old 17 Nov 2002
Contributing Member
Veteran HUBBer
 
Join Date: Aug 2002
Posts: 284
Thanks for the advice Fred,

I took the tensioner off today, to find that,
instead of adjusting the tensioner manually as you suggested or replacing the cam chain, the previous owner had tack-welded a nut to the end of the tensioner shaft, giving it an extra 7mm in length.

So I guess this means replacing the cam chain tensioner and the chain.

I'm surprised at what seems like premature wear of the cam chain though.
The bike's odo says it has only done 18000km and the rest of the bike seems to echo this:
No play in the swing arm or other bearings, no scratches/dings on the bash plates/side covers, no oil leaks, no wear showing on the rockers/valve stem tops and the whole bike is relatively clean as well.

Geoff
Reply With Quote
  #10  
Old 17 Nov 2002
KlausXT600's Avatar
Registered Users
Veteran HUBBer
 
Join Date: Sep 2000
Location: Hamburg, Germany
Posts: 295
had something similar some month ago.
somebody asked me to replace the cam chain on a 2KF because tensioner was at it's end.
when i opened the engine i found that a previous 'expert-mechanic' had mounted the front chain guide in a wrong position.
the chain length was o.k. ...

have fun
klaus
Reply With Quote
  #11  
Old 18 Nov 2002
Registered Users
Veteran HUBBer
 
Join Date: Aug 2002
Location: Hendrik Ido Ambacht, Holland
Posts: 360
Miracles always happen. I bought my 660 showing 11.000 km. and looking as new. Always used a lot of engine oil, no smoke, running perfectly. No consumption when all day wide open throttle [like on the beach] and 1 litre every few hundred km when touring around the countryside. Finally at 58.000 km opened the engine, turned out that 1 inlet valve stem seal was the cause of the oil consumption. The valve stem still showed marks of a lathe clamp. The machine shop man told me that the cylinder had been honed before, however there was no oversize piston.

------------------
Fred, XTZ660, Holland.
__________________
Fred, XTZ660, Holland.
Reply With Quote
  #12  
Old 10 Dec 2002
Registered Users
HUBB regular
 
Join Date: Oct 2001
Location: ENGLAND
Posts: 30
Geoff,
This might sound silly but if it's such an old model check where the exhaust joins the bit that goes into the cylinder head.
My original pipes broke there and when sitting on the bike it sounds very similar to noisy tappets!

Griff.
__________________
Do\'nt dream it, do it!
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 Registered Users and/or Members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


 
 

Announcements

Thinking about traveling? Not sure about the whole thing? Watch the HU Achievable Dream Video Trailers and then get ALL the information you need to get inspired and learn how to travel anywhere in the world!

Have YOU ever wondered who has ridden around the world? We did too - and now here's the list of Circumnavigators!
Check it out now
, and add your information if we didn't find you.

Next HU Eventscalendar

HU Event and other updates on the HUBB Forum "Traveller's Advisories" thread.
ALL Dates subject to change.

2024:

Add yourself to the Updates List for each event!

Questions about an event? Ask here

HUBBUK: info

See all event details

 
World's most listened to Adventure Motorbike Show!
Check the RAW segments; Grant, your HU host is on every month!
Episodes below to listen to while you, err, pretend to do something or other...

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

"Ultimate global guide for red-blooded bikers planning overseas exploration. Covers choice & preparation of best bike, shipping overseas, baggage design, riding techniques, travel health, visas, documentation, safety and useful addresses." Recommended. (Grant)



Ripcord Rescue Travel Insurance.

Ripcord Rescue Travel Insurance™ combines into a single integrated program the best evacuation and rescue with the premier travel insurance coverages designed for adventurers.

Led by special operations veterans, Stanford Medicine affiliated physicians, paramedics and other travel experts, Ripcord is perfect for adventure seekers, climbers, skiers, sports enthusiasts, hunters, international travelers, humanitarian efforts, expeditions and more.

Ripcord travel protection is now available for ALL nationalities, and travel is covered on motorcycles of all sizes!


 

What others say about HU...

"This site is the BIBLE for international bike travelers." Greg, Australia

"Thank you! The web site, The travels, The insight, The inspiration, Everything, just thanks." Colin, UK

"My friend and I are planning a trip from Singapore to England... We found (the HU) site invaluable as an aid to planning and have based a lot of our purchases (bikes, riding gear, etc.) on what we have learned from this site." Phil, Australia

"I for one always had an adventurous spirit, but you and Susan lit the fire for my trip and I'll be forever grateful for what you two do to inspire others to just do it." Brent, USA

"Your website is a mecca of valuable information and the (video) series is informative, entertaining, and inspiring!" Jennifer, Canada

"Your worldwide organisation and events are the Go To places to for all serious touring and aspiring touring bikers." Trevor, South Africa

"This is the answer to all my questions." Haydn, Australia

"Keep going the excellent work you are doing for Horizons Unlimited - I love it!" Thomas, Germany

Lots more comments here!



Five books by Graham Field!

Diaries of a compulsive traveller
by Graham Field
Book, eBook, Audiobook

"A compelling, honest, inspiring and entertaining writing style with a built-in feel-good factor" Get them NOW from the authors' website and Amazon.com, Amazon.ca, Amazon.co.uk.



Back Road Map Books and Backroad GPS Maps for all of Canada - a must have!

New to Horizons Unlimited?

New to motorcycle travelling? New to the HU site? Confused? Too many options? It's really very simple - just 4 easy steps!

Horizons Unlimited was founded in 1997 by Grant and Susan Johnson following their journey around the world on a BMW R80G/S.

Susan and Grant Johnson Read more about Grant & Susan's story

Membership - help keep us going!

Horizons Unlimited is not a big multi-national company, just two people who love motorcycle travel and have grown what started as a hobby in 1997 into a full time job (usually 8-10 hours per day and 7 days a week) and a labour of love. To keep it going and a roof over our heads, we run events all over the world with the help of volunteers; we sell inspirational and informative DVDs; we have a few selected advertisers; and we make a small amount from memberships.

You don't have to be a Member to come to an HU meeting, access the website, or ask questions on the HUBB. What you get for your membership contribution is our sincere gratitude, good karma and knowing that you're helping to keep the motorcycle travel dream alive. Contributing Members and Gold Members do get additional features on the HUBB. Here's a list of all the Member benefits on the HUBB.




All times are GMT +1. The time now is 14:00.