Go Back   Horizons Unlimited - The HUBB > Technical, Bike forums > Yamaha Tech
Yamaha Tech Originally the Yamaha XT600 Tech Forum, due to demand it now includes all Yamaha's technical / mechanical / repair / preparation questions.
Photo by Daniel Rintz, Himba children, Namibia

The only impossible journey
is the one
you never begin

Photo by Daniel Rintz,
Himba children, Namibia



Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 22 Mar 2004
Contributing Member
Veteran HUBBer
 
Join Date: Apr 2002
Location: Devon, UK
Posts: 148
Pulling a 3AJ alternator rotor

Anyone with experience pulling an alternator rotor off a 3AJ engine?

This is the electric start that has three hex-cap bolts going through the rotor and (presumably) into the alu spacer behind it.

Do you have to remove these three allen/hex bolts before pulling the rotor?

I have the nut off and have installed a suitable puller into the three M10 threaded holes, however it won't budge even with not-so-gentle taps on the main puller bolt that presses onto the end of the crank.

Help?



------------------
Barry
3AJ Tenere
__________________
Barry
XT600Z 3AJ Tenere (rebuild in progress)
SRX600
Reply With Quote
  #2  
Old 22 Mar 2004
Registered Users
Veteran HUBBer
 
Join Date: Jan 2001
Location: Stockholm
Posts: 651
No need to take out the 3 Allen bolts.
Just for insurance, put back the nut on the crank to protect a bit the threaded part.
Then, put tension on the rotor by screwing in the central puller bolt.
Then hit the central bolt HARD with fi a leaden hammer.
Repeat as required, there might be some damage to the thread on the crank but it is the only way .....

Auke
__________________
Auke
http://aukemarieke.blogspot.com
Reply With Quote
  #3  
Old 23 Mar 2004
Registered Users
Veteran HUBBer
 
Join Date: Aug 2002
Location: Hendrik Ido Ambacht, Holland
Posts: 360
I took the flywheel off my 660 last night. Just don't have mercy with the tools when tightening the central puller bolt. And make sure that you apply some Secret Agent WD-40 to the thread and the head mating surface. Then hit the thing!

------------------
Fred, XTZ660, Holland.
__________________
Fred, XTZ660, Holland.
Reply With Quote
  #4  
Old 14 Feb 2006
Registered Users
Veteran HUBBer
 
Join Date: Aug 2005
Location: Calgary AB
Posts: 1,032
Hi,

What size is the required flywheel puller for the 3AJ?

Taco
__________________
Tacos Tyring Travels.com
Reply With Quote
  #5  
Old 14 Feb 2006
Registered Users
Veteran HUBBer
 
Join Date: Jan 2001
Location: Stockholm
Posts: 651
It's a special tool. Can for instance be bought from kedo.com.

Auke
__________________
Auke
http://aukemarieke.blogspot.com
Reply With Quote
  #6  
Old 14 Feb 2006
Contributing Member
Veteran HUBBer
 
Join Date: Apr 2002
Location: Devon, UK
Posts: 148
You can use a standard puller too - just find one that fits.

I still haven't managed to get my flywheel off!



------------------
Barry
3AJ Tenere
__________________
Barry
XT600Z 3AJ Tenere (rebuild in progress)
SRX600
Reply With Quote
  #7  
Old 14 Feb 2006
big t's Avatar
Registered Users
HUBB regular
 
Join Date: Aug 2005
Location: northern ireland
Posts: 89



I still haven't managed to get my flywheel off!

Hit it one GOOD CLOUT! make sure your puller is dead square on the flywheel & good,n tight!

AKE SURE[/B][/QUOTE]

__________________
big T
Reply With Quote
  #8  
Old 9 Sep 2006
*Touring Ted*'s Avatar
Contributing Member
Veteran HUBBer
 
Join Date: Jul 2005
Location: Wirral, England.
Posts: 5,654
Im having the same problem... What kind of puller do i need ? Iv only got the ones which thread into the centre on conventional one.. it doesnt seem to work on this !!

<a href="http://imageshack.us"><img src="http://img400.imageshack.us/img400/8545/rotor010largekeygh2.jpg" border="0" alt="Image Hosted by ImageShack.us" /></a>
__________________
Did some trips.
Rode some bikes.
Fix them for a living.
Can't say anymore.

Last edited by *Touring Ted*; 9 Sep 2006 at 18:02.
Reply With Quote
  #9  
Old 14 Sep 2006
Registered Users
Veteran HUBBer
 
Join Date: Feb 2004
Location: Toulouse, France
Posts: 216
Rotor 3aj

Hello,

Sorry but.. avoid hitting the crank with a hammer, it's really not good for the
bearings, they are allready the 3AJ's weakpoint on the rotor side.
Undecompressed cylinder, heavy rotor and heavy torque from starter engine makes them spin in case or on crank, at 100 000 K's crank can be demetalised enough that a new bearing won't fit.
The solution is to glue them with permanent lochtite.
Bearing don't like side forces, rotor will go off but the bearing might be nasty hit.
Try finding an inerty extractor and fasten it in the three holes, it hits also, but in the right direction !
Or build one, shouldn't be to difficult, three screws,one axle and a big weight
moving around the axle, hitting its end like a hammer when pulled out.
Or use a solid extractor and screw it out with WD40 and patience.


Matt
Reply With Quote
  #10  
Old 14 Sep 2006
*Touring Ted*'s Avatar
Contributing Member
Veteran HUBBer
 
Join Date: Jul 2005
Location: Wirral, England.
Posts: 5,654
Quote:
Originally Posted by Matt595
Hello,

Sorry but.. avoid hitting the crank with a hammer, it's really not good for the
bearings, they are allready the 3AJ's weakpoint on the rotor side.
Undecompressed cylinder, heavy rotor and heavy torque from starter engine makes them spin in case or on crank, at 100 000 K's crank can be demetalised enough that a new bearing won't fit.
The solution is to glue them with permanent lochtite.
Bearing don't like side forces, rotor will go off but the bearing might be nasty hit.
Try finding an inerty extractor and fasten it in the three holes, it hits also, but in the right direction !
Or build one, shouldn't be to difficult, three screws,one axle and a big weight
moving around the axle, hitting its end like a hammer when pulled out.
Or use a solid extractor and screw it out with WD40 and patience.


Matt
I agree. I for one will not be hitting it with a hammer. Iv purchased a proper puller for the bike. Basically a 10mm disc with 3 cut outs for the pulling points and a centre thread which a large bolt goes through and forces teh disc back and with it , the rotor.

Once i have it delivered and im happy with it, im going to make some copies and sell them on ebay for £10. 1/3 price Iv paid for mine.
__________________
Did some trips.
Rode some bikes.
Fix them for a living.
Can't say anymore.
Reply With Quote
  #11  
Old 14 Sep 2006
Registered Users
Veteran HUBBer
 
Join Date: Feb 2004
Location: Toulouse, France
Posts: 216
Smile 3aj Rotor

Hello,

As you say its only a disc and four screws..
By the way.. I do have the drawings for the tool and could send them to you.
They are also available on the site of the french ténéré club, though you'll have to find the adress by yourself, cause I have forgotten it since, maybe with the help of a search engine, try yahoo.fr.


Matt
Reply With Quote
  #12  
Old 14 Sep 2006
Registered Users
Veteran HUBBer
 
Join Date: Jan 2001
Location: Stockholm
Posts: 651
I have that puller

But you still need the hammer to shock the flywheel sufficiently ..... I hope you ar lucky.

Auke
__________________
Auke
http://aukemarieke.blogspot.com
Reply With Quote
  #13  
Old 15 Sep 2006
Registered Users
Veteran HUBBer
 
Join Date: Feb 2004
Location: Toulouse, France
Posts: 216
Rotor

Maybe if you do like Fred says, you put WD40 everywhere, then you take the tool in the evening, screw it as tight as possible, so the thing is under tention.
Go to sleep and maybe in the morning it will go off if you continue screwing.
Miracles can happend.

Matt
Reply With Quote
  #14  
Old 15 Sep 2006
*Touring Ted*'s Avatar
Contributing Member
Veteran HUBBer
 
Join Date: Jul 2005
Location: Wirral, England.
Posts: 5,654
Quote:
Originally Posted by aukeboss
But you still need the hammer to shock the flywheel sufficiently ..... I hope you ar lucky.

Auke
Iv not needed one on any other bike... Hammers and rotors dont mix well usually

Ill let you know when the took arrives.
__________________
Did some trips.
Rode some bikes.
Fix them for a living.
Can't say anymore.
Reply With Quote
  #15  
Old 18 Sep 2006
chipompom's Avatar
Registered Users
New on the HUBB
 
Join Date: Sep 2006
Location: uk
Posts: 17
Hi folks,

Just bought a 91 XTZ660, afetr a week a rattling noise apeared, so after checking this forum (many thanks by the way) i checked the cam chain adjuster (removing the spring first) and found it has bee pushed out to its maximum!!!!!!!!

Don't realy fancy taking the engine out, so i've ordered a new chain (from Yamaha) and 2 new guides, and tonight i'm going in and try to figure out how to take the flywheel off without causing more damage

I'll take some pics and try to post them as its going on, just don't laugh at the bleeding nuckles
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 Registered Users and/or Members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


 
 

Announcements

Thinking about traveling? Not sure about the whole thing? Watch the HU Achievable Dream Video Trailers and then get ALL the information you need to get inspired and learn how to travel anywhere in the world!

Have YOU ever wondered who has ridden around the world? We did too - and now here's the list of Circumnavigators!
Check it out now
, and add your information if we didn't find you.

Next HU Eventscalendar

HU Event and other updates on the HUBB Forum "Traveller's Advisories" thread.
ALL Dates subject to change.

2024:

Add yourself to the Updates List for each event!

Questions about an event? Ask here

HUBBUK: info

See all event details

 
World's most listened to Adventure Motorbike Show!
Check the RAW segments; Grant, your HU host is on every month!
Episodes below to listen to while you, err, pretend to do something or other...

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

"Ultimate global guide for red-blooded bikers planning overseas exploration. Covers choice & preparation of best bike, shipping overseas, baggage design, riding techniques, travel health, visas, documentation, safety and useful addresses." Recommended. (Grant)



Ripcord Rescue Travel Insurance.

Ripcord Rescue Travel Insurance™ combines into a single integrated program the best evacuation and rescue with the premier travel insurance coverages designed for adventurers.

Led by special operations veterans, Stanford Medicine affiliated physicians, paramedics and other travel experts, Ripcord is perfect for adventure seekers, climbers, skiers, sports enthusiasts, hunters, international travelers, humanitarian efforts, expeditions and more.

Ripcord travel protection is now available for ALL nationalities, and travel is covered on motorcycles of all sizes!


 

What others say about HU...

"This site is the BIBLE for international bike travelers." Greg, Australia

"Thank you! The web site, The travels, The insight, The inspiration, Everything, just thanks." Colin, UK

"My friend and I are planning a trip from Singapore to England... We found (the HU) site invaluable as an aid to planning and have based a lot of our purchases (bikes, riding gear, etc.) on what we have learned from this site." Phil, Australia

"I for one always had an adventurous spirit, but you and Susan lit the fire for my trip and I'll be forever grateful for what you two do to inspire others to just do it." Brent, USA

"Your website is a mecca of valuable information and the (video) series is informative, entertaining, and inspiring!" Jennifer, Canada

"Your worldwide organisation and events are the Go To places to for all serious touring and aspiring touring bikers." Trevor, South Africa

"This is the answer to all my questions." Haydn, Australia

"Keep going the excellent work you are doing for Horizons Unlimited - I love it!" Thomas, Germany

Lots more comments here!



Five books by Graham Field!

Diaries of a compulsive traveller
by Graham Field
Book, eBook, Audiobook

"A compelling, honest, inspiring and entertaining writing style with a built-in feel-good factor" Get them NOW from the authors' website and Amazon.com, Amazon.ca, Amazon.co.uk.



Back Road Map Books and Backroad GPS Maps for all of Canada - a must have!

New to Horizons Unlimited?

New to motorcycle travelling? New to the HU site? Confused? Too many options? It's really very simple - just 4 easy steps!

Horizons Unlimited was founded in 1997 by Grant and Susan Johnson following their journey around the world on a BMW R80G/S.

Susan and Grant Johnson Read more about Grant & Susan's story

Membership - help keep us going!

Horizons Unlimited is not a big multi-national company, just two people who love motorcycle travel and have grown what started as a hobby in 1997 into a full time job (usually 8-10 hours per day and 7 days a week) and a labour of love. To keep it going and a roof over our heads, we run events all over the world with the help of volunteers; we sell inspirational and informative DVDs; we have a few selected advertisers; and we make a small amount from memberships.

You don't have to be a Member to come to an HU meeting, access the website, or ask questions on the HUBB. What you get for your membership contribution is our sincere gratitude, good karma and knowing that you're helping to keep the motorcycle travel dream alive. Contributing Members and Gold Members do get additional features on the HUBB. Here's a list of all the Member benefits on the HUBB.




All times are GMT +1. The time now is 06:49.