Horizons Unlimited - The HUBB

Horizons Unlimited - The HUBB (https://www.horizonsunlimited.com/hubb/)
-   Yamaha Tech (https://www.horizonsunlimited.com/hubb/yamaha-tech/)
-   -   noise on head (https://www.horizonsunlimited.com/hubb/yamaha-tech/noise-on-head-39554)

zisis 17 Dec 2008 21:07

noise on head
 
Hello everybody.
I am new here but old rider on my xts.
On the last time i have noise on my TTS head and i want to asked all people who write here if knows something about this.

:thumbup1:

zisis 18 Dec 2008 14:51

Any idea ?:helpsmilie:

yhprum 18 Dec 2008 15:50

Xts can be noisy. You can do a check to see if there is a coonecting rod or piston problem by putting the bike in 1stgear and with the brakes on, slowly let the clutch out. If the noise increases, that bad. If it stays the same, concentrate on other areas such as cam chain tension, vavle adjustment ect.
Also if the noise is greater when cold, this could indicate piston slap.
Good Luck, Steve

zisis 18 Dec 2008 20:17

Thank you for your time

zisis 18 Dec 2008 20:19

I wiil do it tommorow and i will write my answer

zisis 18 Dec 2008 20:24

I am afraid for the worse.:(:(:(:(:(

xtorange 19 Dec 2008 13:38

hi, i recently had a worrying noise from the top end of my 54K km 4PT. Took camshaft out and noticed one of the 2 oil holes in the camshaft inlet was blocked. Blew it clear and reinstalled..... no noise now.

zisis 20 Dec 2008 15:42

Hallo
Today i have tried to see if my tt has problem with conecting rod or piston and confirm it have not noise .

zisis 20 Dec 2008 15:43

I am afraid for the worse.:(:(:(:(:(


All times are GMT +1. The time now is 16:21.


vB.Sponsors