Go Back   Horizons Unlimited - The HUBB > Technical, Bike forums > Yamaha Tech
Yamaha Tech Originally the Yamaha XT600 Tech Forum, due to demand it now includes all Yamaha's technical / mechanical / repair / preparation questions.
Photo by Daniel Rintz, Himba children, Namibia

The only impossible journey
is the one
you never begin

Photo by Daniel Rintz,
Himba children, Namibia



Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 9 Oct 2004
Registered Users
HUBB regular
 
Join Date: Jun 2004
Location: Mafinga, Tanzania
Posts: 36
no neutral with engine running?

Ok, so I've got this model '89 xt600 that does not want to shift into neutral when the engine is running and the bike is at a standstill. In fact, it takes a major effort to get the bike into second gear at a standstill. When the engine is off, shifting into neutral (and through all of the gears) is as easy as it should be.

This is more of an annoyance than anything else. Whenever I pull over to the side of the road to get something out of my bag I have to kill the engine; I can't just let it run in neutral. Plus I'm trying to prep the bike for the big sahara trip, so I want to make sure that the bike is in good working order. I wonder if this problem is a sign of worse things to come? If I was at home, I would get down to business opening up the bike to see what's wrong but my access to gaskets, etc. right now is limited.

Suggestions? Similar experiences?

Brian
Reply With Quote
  #2  
Old 9 Oct 2004
Laromonster's Avatar
Registered Users
Veteran HUBBer
 
Join Date: Dec 2003
Location: Stavanger,Norway
Posts: 112
hi again Brian, have you tried adjusting the clutch wire? shouldnt be more than a 3mm gap at the handle
__________________
Laromo \ '02 KTM 300 EXC "Jake"
'05 KTM 640 ADV "Fatman"
Reply With Quote
  #3  
Old 10 Oct 2004
Registered Users
New on the HUBB
 
Join Date: Jul 2002
Location: Denmark
Posts: 8
When at standstill with engine running, have you tried revving the engine while trying to shift (pull clutch lever, turn throttle a bit, shift)?
Works for me...
__________________
/Jonas
Reply With Quote
  #4  
Old 10 Oct 2004
Registered Users
HUBB regular
 
Join Date: Jun 2004
Location: Mafinga, Tanzania
Posts: 36
I will try adjusting the clutch cable, but if there was too much slack in the line wouldn't I be experiencing problems with all of my shifting? If that doesn't work, I'll try the clutch-rev-shift thing. Will let you know how it goes.

Brian
Reply With Quote
  #5  
Old 25 Oct 2004
Registered Users
HUBB regular
 
Join Date: Jan 2004
Posts: 42
I have an 86 Tenere and had exactly the same problem which I solved very easily. I don't want to insult your intelligence because you've probably tried this but when I stop my bike, to get it into neutral I go down to 1st, then lift the gear peg up, and then a light tap down will put in into neutral every time and that is the only way I can manage it.
Reply With Quote
  #6  
Old 25 Oct 2004
Registered Users
HUBB regular
 
Join Date: Jun 2004
Location: Mafinga, Tanzania
Posts: 36
Well, I've adjusted the clutch cable, but it made no difference. There was only an extra mm of slack.

The clutch-rev-shift works for getting the bike out of first gear and into second, but it is still an effort, and neutral just isn't happening.

As for being unfamiliar with shifting into neutral, this is my 4th bike in 6 years. I know how to finesse the transmission into neutral from 1st or second. In fact my first bike was an '83 Yamaha that was a little difficult to get into neutral, but with a little patience I always got it. This particular xt I'm working on now is just being plain stubborn.

If anyone else reads this and wants more clues, I can easily shift into neutral from 2nd gear while going 20+ kph.

Any other leads would be helpful.
Reply With Quote
  #7  
Old 27 Oct 2004
Registered Users
Veteran HUBBer
 
Join Date: Feb 2002
Posts: 212
Hi

It sounds like your clutch isn't properly disengaging, also known as dragging.

Older bikes such as my XS650, Z650 etc have a second method of clutch adjustment.
This is for the free play of the mechanism that the engine end of the clutch cable goes to, and the procedure is typically:
Put as much slack in clutch cable as possible.
Remove small cover from left side engine case.
Slacken loc nut and screw the screw in until it just touches mechanism behind it.
Back screw off half a turn and loc the loc nut.
Reset cable slack and refit cover.

Now the XT600 doesn't have such an adjuster accessable fron left side engine case, but loking in my Clymer manual they appear to have a screw and loc nut at the other end of the clutch push rod,in the clutch basket pressure plate, accessable by removing the right side engine case (which holds oil)

I havent seen a procedure for setting this on the XT, but it might be worth checking it's setting and trying half a turn out if it isn't already.
And while the case is off, I would take the plates out of the clutch basket and check how grooved the slots in the basket are. Ideally they should be no more than polished.
I would also chech the push rod and any ball bearings.
You don't need to remove the clutch basket to do this, but you will need to use a new gasket when you refit the cover, and possibly drain the oil from the engine too.

Good luck

Mark
Reply With Quote
  #8  
Old 28 Oct 2004
Registered Users
New on the HUBB
 
Join Date: Apr 2003
Location: scotland
Posts: 6
I would say you have warped clutch plates, had that same trouble on a GSXR1100 I once owned.
Reply With Quote
  #9  
Old 31 Oct 2004
Registered Users
HUBB regular
 
Join Date: Jun 2004
Location: Mafinga, Tanzania
Posts: 36
Hmmm, I may very well open up the side of the engine and look at the clutch plates. However, I would like to have a little more confirmation before breaking things open. Are there other symptoms of a dragging clutch (besdies difficulty shifting into neutral)? Also, I seem to recall there being two different types of plates in the clutch assembly. One type is actually referred to as clutch plates. The other is kind of a spacer (I think). My friend told me that it is the spacer that gets worn, not the actually clutch plates. What are your thoughts on that? I would just open it up and look at what's worn, but I gettting close to the departure date and time is somewhat of an issue.

Thanks for the advice.

Brian
Reply With Quote
  #10  
Old 2 Nov 2004
Registered Users
New on the HUBB
 
Join Date: Apr 2003
Location: scotland
Posts: 6

Dont muck about thinking of whether to open the engine up to look at the plates just do it, and dont just look at then take them out and give them a visual, then measure them on a glass plate with feeler guages checking for trueness, or just buy new plates anyway they are not exactly dear.

P.S. my gixer had some cork pads missing, new plates sorted that and the draging and trouble getting into 1st gear.
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 Registered Users and/or Members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


 
 

Announcements

Thinking about traveling? Not sure about the whole thing? Watch the HU Achievable Dream Video Trailers and then get ALL the information you need to get inspired and learn how to travel anywhere in the world!

Have YOU ever wondered who has ridden around the world? We did too - and now here's the list of Circumnavigators!
Check it out now
, and add your information if we didn't find you.

Next HU Eventscalendar

HU Event and other updates on the HUBB Forum "Traveller's Advisories" thread.
ALL Dates subject to change.

2024:

Add yourself to the Updates List for each event!

Questions about an event? Ask here

HUBBUK: info

See all event details

 
World's most listened to Adventure Motorbike Show!
Check the RAW segments; Grant, your HU host is on every month!
Episodes below to listen to while you, err, pretend to do something or other...

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

"Ultimate global guide for red-blooded bikers planning overseas exploration. Covers choice & preparation of best bike, shipping overseas, baggage design, riding techniques, travel health, visas, documentation, safety and useful addresses." Recommended. (Grant)



Ripcord Rescue Travel Insurance.

Ripcord Rescue Travel Insurance™ combines into a single integrated program the best evacuation and rescue with the premier travel insurance coverages designed for adventurers.

Led by special operations veterans, Stanford Medicine affiliated physicians, paramedics and other travel experts, Ripcord is perfect for adventure seekers, climbers, skiers, sports enthusiasts, hunters, international travelers, humanitarian efforts, expeditions and more.

Ripcord travel protection is now available for ALL nationalities, and travel is covered on motorcycles of all sizes!


 

What others say about HU...

"This site is the BIBLE for international bike travelers." Greg, Australia

"Thank you! The web site, The travels, The insight, The inspiration, Everything, just thanks." Colin, UK

"My friend and I are planning a trip from Singapore to England... We found (the HU) site invaluable as an aid to planning and have based a lot of our purchases (bikes, riding gear, etc.) on what we have learned from this site." Phil, Australia

"I for one always had an adventurous spirit, but you and Susan lit the fire for my trip and I'll be forever grateful for what you two do to inspire others to just do it." Brent, USA

"Your website is a mecca of valuable information and the (video) series is informative, entertaining, and inspiring!" Jennifer, Canada

"Your worldwide organisation and events are the Go To places to for all serious touring and aspiring touring bikers." Trevor, South Africa

"This is the answer to all my questions." Haydn, Australia

"Keep going the excellent work you are doing for Horizons Unlimited - I love it!" Thomas, Germany

Lots more comments here!



Five books by Graham Field!

Diaries of a compulsive traveller
by Graham Field
Book, eBook, Audiobook

"A compelling, honest, inspiring and entertaining writing style with a built-in feel-good factor" Get them NOW from the authors' website and Amazon.com, Amazon.ca, Amazon.co.uk.



Back Road Map Books and Backroad GPS Maps for all of Canada - a must have!

New to Horizons Unlimited?

New to motorcycle travelling? New to the HU site? Confused? Too many options? It's really very simple - just 4 easy steps!

Horizons Unlimited was founded in 1997 by Grant and Susan Johnson following their journey around the world on a BMW R80G/S.

Susan and Grant Johnson Read more about Grant & Susan's story

Membership - help keep us going!

Horizons Unlimited is not a big multi-national company, just two people who love motorcycle travel and have grown what started as a hobby in 1997 into a full time job (usually 8-10 hours per day and 7 days a week) and a labour of love. To keep it going and a roof over our heads, we run events all over the world with the help of volunteers; we sell inspirational and informative DVDs; we have a few selected advertisers; and we make a small amount from memberships.

You don't have to be a Member to come to an HU meeting, access the website, or ask questions on the HUBB. What you get for your membership contribution is our sincere gratitude, good karma and knowing that you're helping to keep the motorcycle travel dream alive. Contributing Members and Gold Members do get additional features on the HUBB. Here's a list of all the Member benefits on the HUBB.




All times are GMT +1. The time now is 06:42.