Go Back   Horizons Unlimited - The HUBB > Technical, Bike forums > Yamaha Tech
Yamaha Tech Originally the Yamaha XT600 Tech Forum, due to demand it now includes all Yamaha's technical / mechanical / repair / preparation questions.
Photo by Daniel Rintz, Himba children, Namibia

The only impossible journey
is the one
you never begin

Photo by Daniel Rintz,
Himba children, Namibia



Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 1 Sep 2007
Registered Users
HUBB regular
 
Join Date: Aug 2007
Location: essex
Posts: 28
xt550 v xt600

hi
is the xxt 550 the same as an early xt 600 one if so has anybody got one as i really deperate
cheers
Dave
Reply With Quote
  #2  
Old 2 Sep 2007
Registered Users
HUBB regular
 
Join Date: Aug 2007
Location: France
Posts: 33
Ummmm - what piece exactly, Dave?

Still having electrical problems, I guess?
Reply With Quote
  #3  
Old 3 Sep 2007
Registered Users
HUBB regular
 
Join Date: Aug 2007
Location: essex
Posts: 28
xt550 v xt 600

hi,
yes i am,i guess i should have given more details. i believe the cdi unit is playing up as sometimes the bike starts and when it is it runs it runs pretty well. then it wont start at all,although i have a spark and petrol?
Dave
Reply With Quote
  #4  
Old 3 Sep 2007
Registered Users
HUBB regular
 
Join Date: Aug 2007
Location: France
Posts: 33
Quote:
Originally Posted by triumph View Post
hi,
yes i am,i guess i should have given more details. i believe the cdi unit is playing up as sometimes the bike starts and when it is it runs it runs pretty well. then it wont start at all,although i have a spark and petrol?
Dave
Intermittent issues are more likely to be a bad connection than the CDI playing up. CDIs and the like generally either don't work at all (due to burned out diodes or blown caps) or will work and then cut out after a while due to overheating.

If you're getting a spark but the bike won't start, I would strongly suspect a bad connection at the coil, probably on the HT lead or plug cap. how are you testing the spark? "plug out and held against the casing", or "cap off and spark from the HT lead itself"?

I'd check *all* connections from the coil, especially the earth connection and HT lead, a good idea would be to pull the cap from the plug and test connectivity / resistance between the plug terminal and earth whilst jiggling the lead about.

Another possible issue would be a weak spark, there's a few things that could cause this.

First off, are the ignitor coil resistances (as measured between the red and brown wires from the alternator) in spec? If this is low, you have a stator rewind in your future (probably a short in one of the coils, and your spark won't be as "hot" as it should be). Coil resistance should be of the order of 150-250 ohms or so (although your manual should have the exact figures)
While you're there, make sure there's no connectivity between either of these connections and earth, even when jiggling the wires.

Next up, are you getting a good connection from igniter coils to CDI? This one is kinda hard to test, as the wires are sealed at the CDI end and there's only one pair of connectors for the ignitor coil feed. Basically, if the wires to the CDI are fecked, you might only be getting an intermittent spark, or if the connectors are corroded to buggery you might not be getting the current you want (although the voltages might look fine). Like I said, it's a bitch to test. Check the CDI wires for obvious breaks, clean those terminals (red and brown again) as well as you can, plug and unplug a few times to get a decent connection. Do the same to all the other connections from alternator to CDI at the same time (the 3 pin plug with white-red/green/white-green), you *know* you want to.

You can test the output of the igniter coils with a multimeter set to AC volts, 2000V range or so IIRC by connecting your multimeter to the brown and red terminals *without disconnecting them* while the motor is running. Easiest way to do this is to make a pair of pigtails with "plugs", connect them to a "domino" terminal block and then gently fit the existing "plug" connections into the domino, that way you can take readings from the screws in the terminal block... If the manual gives amps rather than volts, you can connect a meter inline to see what the output is.

Resistance of the brown-red connection on the CDI should be roughly the same as that of the igniter coils. If that is out of spec per the manual, your igniter is definitely dead.

While we're on this side of the CDI, might as well check the pulser coils, generally you have 100-150 ohms or so between the center tap and each leg (so, green to white-green and green to white-red)

That's about all you can do this side easily and without an identical, known good, igniter and alternator.

Now off to the "hot" side.

There's bugger all you can do to static test the hot side of the CDI, so check the orange, black and black-white connections are good, then it's off to the coil.

Coil primary resistance (orange to black) should be under an ohm, probably 0.5 ohms or so. check your manual for the exact figure

Coil secondary resistance (HT lead connection to black) should be in the 5000-10000 ohm range. again, use your manual.

Testing the coil output is potentially lethal, I'd avoid it if possible. You're dealing with tens of kilovolts when the motor is running (usually between 10 and 30Kv or so, depending on motor regime)

Other stuff to check is all the gubbins that hangs off the black-white lead from the CDI. Kill switch, main switch, etc. With everything turned to "run" check continuity from earth to where the CDI plugs into the loom. The kill switches and the like all work by *earthing*, so there should be zero continuity here with everything set to run. Also check the black/white lead of the CDI for continuity to earth.

If you're seeing continuity in the loom, there's a short somewhere. Isolate by slowly unplugging switchgear and testing (kill switches are notorious for dying), if you have the kill and ignition switches disconnected and you still have continuity, you have a short in the loom itself (and good luck with that)

Simon
Reply With Quote
  #5  
Old 3 Sep 2007
Registered Users
HUBB regular
 
Join Date: Aug 2007
Location: France
Posts: 33
Oh, and in reply to the original question...

XT400/550 CDI is Nippon Denso 5Y3-85540-50
XT600 34L CDI is Nippon Denso 07000-1080

XT400/550 coil is Nippon Denso 5Y1-82310-50
XT600 34L coil is Nippon Denso 129700-089

It's highly probable that the 34L CDI and coil will work more or less fine with the 550, although the advance curves are different and you may have problems at higher regimes (the 34L advances to 36° at 4500RPM, 550 to 35° at 6500 RPM), but I'd check out all the connections before considering transplanting CDIs from anything other than a 400 or 550.

And a new plug probably wouldn't hurt if you haven't already.
Reply With Quote
  #6  
Old 3 Sep 2007
Registered Users
Veteran HUBBer
 
Join Date: Aug 2007
Location: Sax, Spain
Posts: 901
second tuftys last bit of advice

i will second tuftys last bit of advice..

try a NEW PLUG... but DO IT FIRST, you would be amazed at how many times the plug has been the problem on bikes i have worked on, also a worn plug takes a much higher voltage to produce a nice fat spark than a new one.

may i wish you a fast fault find as electrical problems are the worst type of problems, or at least they seem to bring out the worst in us, in terms of frustration, tears and banging head against shed wall!
Reply With Quote
  #7  
Old 3 Sep 2007
Registered Users
HUBB regular
 
Join Date: Aug 2007
Location: essex
Posts: 28
hi,
thanks for the very informative reply(s). the plug is new. i have just been thinking of the things that i have done and when i got the bike running well all of the wires from the alternator were loose as i had taken a lot of the tape of to check for breaks in the wires. then i turned off taped them up and it would'nt start again,could be a coincidence but i will follow your checks. i have disconnected the kill switch try the ignition switch and test the oldd and new alternators. have just purchased a new coil.
thanks once again and will let you know the progress !
Dave
Reply With Quote
  #8  
Old 3 Sep 2007
Registered Users
Veteran HUBBer
 
Join Date: Mar 2007
Location: UK
Posts: 4,343
Quote:
Originally Posted by triumph View Post
hi,
thanks for the very informative reply(s). the plug is new. i have just been thinking of the things that i have done and when i got the bike running well all of the wires from the alternator were loose as i had taken a lot of the tape of to check for breaks in the wires. then i turned off taped them up and it would'nt start again,could be a coincidence but i will follow your checks. i have disconnected the kill switch try the ignition switch and test the oldd and new alternators. have just purchased a new coil.
thanks once again and will let you know the progress !
Dave
triumph,
I don't believe in coincidences when it comes to electrics on bikes! If you can convince yourself that the last thing you adjusted/changed/fiddled with/cocked up is the cause of your current problem then, IMO, go for that first.

Beyond that, you sure have a great post from Tufty - very detailed Tufty!
__________________
Dave
Reply With Quote
  #9  
Old 3 Sep 2007
Registered Users
HUBB regular
 
Join Date: Aug 2007
Location: essex
Posts: 28
Dave
no i am prob hoping on that one. electrics are never that straight forward.
yes it is a very good post.i know this problem has been going on for a while as the last owner couldn't get it going,but i will in the end i want to ride
Dave
Reply With Quote
  #10  
Old 3 Sep 2007
Registered Users
Veteran HUBBer
 
Join Date: Mar 2007
Location: UK
Posts: 4,343
Even so, "something simple" has changed is the implication of the sudden change you have experienced; but only you really know all of the symptoms and the history of what has been going on when you have worked on the bike; it is very, very difficult to get across in writing what is going on! (been there, tried that and done it!!).

Tufty's fault finding post is definitely very valuable to you, next to a multi-meter!

Good luck
__________________
Dave
Reply With Quote
  #11  
Old 7 Sep 2007
Registered Users
HUBB regular
 
Join Date: Aug 2007
Location: essex
Posts: 28
xt cdi

hi,
i have just checked my cdi wiring and have discovered that a blue/yellow trace wire has been used for an earth ? shouldn't that wire be for a sidestand cut out switch if it were fitted to this bike?
my next question then would be how do i eart the cdi unit, i cannot see any black wires coming out that are not already connected.
Dave
Reply With Quote
  #12  
Old 7 Sep 2007
Registered Users
HUBB regular
 
Join Date: Aug 2007
Location: France
Posts: 33
I don't see a black/yellow on my wiring diagram, I'll pop out and have a shufty at my CDI in a bit. There's a black/white, which is the main cutoff, and most definitely shouldn't be earthed (should be connected to the loom's black/white). Don't worry about not being able to earth the unit itself, just make sure the black wire is connected to a reliable earth (i.e. check the black loom connection for good earth).

Do you have a wiring diagram showing the mysterious black/yellow wire? Could be that the '83 has additional stuff my '82 doesn't.

Simon
Reply With Quote
  #13  
Old 8 Sep 2007
Registered Users
HUBB regular
 
Join Date: Aug 2007
Location: France
Posts: 33
Checked my CDI - no black/yellow.

Brown, red, green, red/white and green/white for the genny, black, orange, black/white and 2 whites for the loom. That's it.

Simon

Last edited by tufty; 10 Sep 2007 at 07:44. Reason: edited for brainfartness
Reply With Quote
  #14  
Old 9 Sep 2007
Registered Users
HUBB regular
 
Join Date: Aug 2007
Location: essex
Posts: 28
hi simon,
sorry its a blue and yellow
Dave
Reply With Quote
  #15  
Old 11 Sep 2007
Registered Users
HUBB regular
 
Join Date: Aug 2007
Location: France
Posts: 33
At a guess, then, you have the following connections on your CDI:

- Brown and red flyleads to alternator (spark juice)
- A 3 pin plug to alternator (green, green/white and something else, pulser coil connections)
- Orange (LT feed to coil)
- Black (earth)
- Black/white (killswitch etc)
- Blue
- Blue / yellow

This is me guessing it's an XT600 1VJ or 3AJ part, rather than the original. My XT550 part number is be 5Y1-85540-52-00 (marked 5Y1-52), but it seems there are more than one, even for the 550 (5Y1-50, 5Y1-51, 5Y1-52, 5Y2, 5Y3), so it could be that other 550 CDIs are different to mine. That's a helluva lot of different ignitors for a bike only made over a 2 year span, I think some of those part numbers might be remarkings for different markets, but who knows - I sure don't.

Back to the 600 CDIs. The way these are normally wired, far as I can tell, is that the black/white runs only to the ignition switch, and the blue and blue-yellow run to all the other switchgear (sidestand switch, killswitch, etc), but I'm not sure what polarity they are supposed to have. I'd guess that, if you haven't lifted the CDI itself, the connections are good, so leave them as they are.

I still think you have a stripped or earthing wire between CDI and alternator - after all, that's what you said you'd untaped and retaped.

I'd mail you my CDI to test with, but I'm not actually sure that's good, either

Simon
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 Registered Users and/or Members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
1986 XT600 Suspension Mods MotoMedic Yamaha Tech 2 16 May 2009 22:02
Standard XT600 vs. Tenere bruce_a_wallace Yamaha Tech 13 6 Sep 2006 10:52
Buying XT600 in New Zealand? tsipi_r Travellers' questions that don't fit anywhere else 4 14 Nov 2001 15:43
Starting Problems xt600 arne Yamaha Tech 2 3 Jan 2001 18:30

 
 

Announcements

Thinking about traveling? Not sure about the whole thing? Watch the HU Achievable Dream Video Trailers and then get ALL the information you need to get inspired and learn how to travel anywhere in the world!

Have YOU ever wondered who has ridden around the world? We did too - and now here's the list of Circumnavigators!
Check it out now
, and add your information if we didn't find you.

Next HU Eventscalendar

HU Event and other updates on the HUBB Forum "Traveller's Advisories" thread.
ALL Dates subject to change.

2024:

Add yourself to the Updates List for each event!

Questions about an event? Ask here

HUBBUK: info

See all event details

 
World's most listened to Adventure Motorbike Show!
Check the RAW segments; Grant, your HU host is on every month!
Episodes below to listen to while you, err, pretend to do something or other...

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

"Ultimate global guide for red-blooded bikers planning overseas exploration. Covers choice & preparation of best bike, shipping overseas, baggage design, riding techniques, travel health, visas, documentation, safety and useful addresses." Recommended. (Grant)



Ripcord Rescue Travel Insurance.

Ripcord Rescue Travel Insurance™ combines into a single integrated program the best evacuation and rescue with the premier travel insurance coverages designed for adventurers.

Led by special operations veterans, Stanford Medicine affiliated physicians, paramedics and other travel experts, Ripcord is perfect for adventure seekers, climbers, skiers, sports enthusiasts, hunters, international travelers, humanitarian efforts, expeditions and more.

Ripcord travel protection is now available for ALL nationalities, and travel is covered on motorcycles of all sizes!


 

What others say about HU...

"This site is the BIBLE for international bike travelers." Greg, Australia

"Thank you! The web site, The travels, The insight, The inspiration, Everything, just thanks." Colin, UK

"My friend and I are planning a trip from Singapore to England... We found (the HU) site invaluable as an aid to planning and have based a lot of our purchases (bikes, riding gear, etc.) on what we have learned from this site." Phil, Australia

"I for one always had an adventurous spirit, but you and Susan lit the fire for my trip and I'll be forever grateful for what you two do to inspire others to just do it." Brent, USA

"Your website is a mecca of valuable information and the (video) series is informative, entertaining, and inspiring!" Jennifer, Canada

"Your worldwide organisation and events are the Go To places to for all serious touring and aspiring touring bikers." Trevor, South Africa

"This is the answer to all my questions." Haydn, Australia

"Keep going the excellent work you are doing for Horizons Unlimited - I love it!" Thomas, Germany

Lots more comments here!



Five books by Graham Field!

Diaries of a compulsive traveller
by Graham Field
Book, eBook, Audiobook

"A compelling, honest, inspiring and entertaining writing style with a built-in feel-good factor" Get them NOW from the authors' website and Amazon.com, Amazon.ca, Amazon.co.uk.



Back Road Map Books and Backroad GPS Maps for all of Canada - a must have!

New to Horizons Unlimited?

New to motorcycle travelling? New to the HU site? Confused? Too many options? It's really very simple - just 4 easy steps!

Horizons Unlimited was founded in 1997 by Grant and Susan Johnson following their journey around the world on a BMW R80G/S.

Susan and Grant Johnson Read more about Grant & Susan's story

Membership - help keep us going!

Horizons Unlimited is not a big multi-national company, just two people who love motorcycle travel and have grown what started as a hobby in 1997 into a full time job (usually 8-10 hours per day and 7 days a week) and a labour of love. To keep it going and a roof over our heads, we run events all over the world with the help of volunteers; we sell inspirational and informative DVDs; we have a few selected advertisers; and we make a small amount from memberships.

You don't have to be a Member to come to an HU meeting, access the website, or ask questions on the HUBB. What you get for your membership contribution is our sincere gratitude, good karma and knowing that you're helping to keep the motorcycle travel dream alive. Contributing Members and Gold Members do get additional features on the HUBB. Here's a list of all the Member benefits on the HUBB.




All times are GMT +1. The time now is 18:04.