Go Back   Horizons Unlimited - The HUBB > Technical, Bike forums > Yamaha Tech
Yamaha Tech Originally the Yamaha XT600 Tech Forum, due to demand it now includes all Yamaha's technical / mechanical / repair / preparation questions.
Photo by Daniel Rintz, Himba children, Namibia

The only impossible journey
is the one
you never begin

Photo by Daniel Rintz,
Himba children, Namibia



Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 15 Apr 2007
jim jim is offline
Gold Member
Veteran HUBBer
 
Join Date: Aug 2003
Location: Cape Town South Africa
Posts: 222
Unhappy Stripped sump plug in Malawi -HELP!

I made a terrible mistake; I let someone else prepare my bike for the trip Im now on and the bastard stripped my sump plug which I only discovered during my first oil change on the SA Moz borber. I then had it "repaired" by a guy in Nelspruit who fitted an insert that i was not happy about. Well Ive just tried to screw out the sump plug to drain the oil only to find, though not to my surprise, that the whole insert came out and that the thread which was holding it in place is virtually non existant. So, now Im in Blantyre, Malawi with what i think is an M16 stripped thread in my casing.

The way i see it I have a few options (other than double homicide); I can have a helicoil fitted, but only I guess if there is enough meat left around the hole to take one? I could try a thread repair epoxy product which i have with me that claims to repair threads of all kinds, problem is that it seems to be designed for repairs to a hole where one can access the back of the hole to tape it up while the curing process happens. Of course i cant get to the back of the hole... Thirdly as a desperate fix i could have the hole welded closed and then only be able to change the oil in the oil tank, but it shold get me back to CT..

Any pearls of wisdom would be much appreciated... Condolences and moral support also accepted.

JIm
__________________
"If we don't find something good at least we will find something new." Voltaire
Reply With Quote
  #2  
Old 15 Apr 2007
Registered Users
Veteran HUBBer
 
Join Date: Nov 2004
Location: USA
Posts: 992
Another helicoil
One size up tap to SAE, not metric
Expandable rubber plug
Correct silicon with drain hole very clean, glue-in old plug/bolt
Reply With Quote
  #3  
Old 15 Apr 2007
*Touring Ted*'s Avatar
Contributing Member
Veteran HUBBer
 
Join Date: Jul 2005
Location: Wirral, England.
Posts: 5,654
Which Xt ?? Which hole ??

Your best drilling the old thread out and then tapping out the hole to fit a bigger bolt.

Just make sure you drill the hole to the correct size before tapping it.

Buy a copper washer for the new bolt too.
__________________
Did some trips.
Rode some bikes.
Fix them for a living.
Can't say anymore.
Reply With Quote
  #4  
Old 15 Apr 2007
Registered Users
Veteran HUBBer
 
Join Date: Apr 2006
Location: Staffordshire. uk
Posts: 766
I've put my bodging head on and thought that you may be able to make an oil tight seal with a bolt and washers if you could force a spring washer ( by squeezing it ) and the bolt head inside through the hole leaving the threaded part protruding and then tighten up with a copper washer ( or make one from some alu ) and a plain washer you may be able to seal it. Good luck. These things are sent to try us !
Reply With Quote
  #5  
Old 15 Apr 2007
Dodger's Avatar
Large Golden Member
Veteran HUBBer
 
Join Date: Aug 2005
Location: BC, Canada
Posts: 1,085
I don't know about XTs but I assume that the sump is aluminium .
To get any kind of a good weld it will have to be super clean .
Welding the hole closed and then retapping would be a viable option IF you have good workshop facilities to hand . Welding a patch over the area might be a good idea if oil contamination is a problem .[ you can clean the outside much easier ] Then you could leave the patch in place and retap at leisure .

Cleaning the area with a good solvent and then an epoxy repair might be a good short term solution .But even don't think about getting the bolt out again until you get home .
I've done temporary repairs by mixing aluminium filings with two part epoxy and filling holes that way .

I wouldn't worry too much about draining the sump even if you are a long way from home , oil changes at the oil tank will be fine .
__________________
Blessed are the cracked, for they let in the light. - Spike Milligan
"When you come to a fork in the road ,take it ! When you come to a spoon in the road ,take that also ."
Reply With Quote
  #6  
Old 15 Apr 2007
Contributing Member
Veteran HUBBer
 
Join Date: Oct 2002
Location: montana usa
Posts: 547
Two part metal epoxy

Clean clean clean then two part epoxy and do it in several layers. May seep slightly but I have had them hold for years. One thing that is available in the states is a 1/2 size larger metric drain plug that will self tap into a stripped hole.
Reply With Quote
  #7  
Old 16 Apr 2007
Registered Users
Veteran HUBBer
 
Join Date: Apr 2003
Location: Cape Town, South Africa
Posts: 303
I see this thread is a bit more elaborate than the related one on the sub saharan branch.

First tell me which idiot did the sump plug repair in CT. I will go and moer him with some heavy tools.

Secondly if this ever happens again go to someone who knows how to repair a sump plug thread professionally. (With a Time-sert)

And now take your pratley steel or whatever epoxi rubbish you have.
Throw your bike onto the side that allows easiest access to the sump hole.
Might be a good idea to take the tank off as well as the battery to avoid fluid spills.
Clean your desaster area as good as you can with tissues & petrol. Hole and surrounds
Glue your plug into the hole.
Have a couple of s to allow epoxi to set before topping up oil and trying.
Change oil more often.
Not sure about the best long term solution without seeing the engine myself.
Reply With Quote
  #8  
Old 16 Apr 2007
mustaphapint's Avatar
Gold Member
Veteran HUBBer
 
Join Date: Oct 2005
Location: Brittany, France
Posts: 401
Can you not try find an engineers merchants who should be able to supply a tapered steel threaded plug. Often used in builders or heavy plant machinery as sump or drain plugs. The steel should be able to rethread itself into the softer alloy. It's worth a try, even if you go for one of the other suggested repairs and decide to carry this as a backup.
__________________
If you think you are too small to make a difference you have never spent the night with a mosquito.
Reply With Quote
  #9  
Old 17 Apr 2007
jim jim is offline
Gold Member
Veteran HUBBer
 
Join Date: Aug 2003
Location: Cape Town South Africa
Posts: 222
Thanks for all the response....
I was supposed to go and collect a guy today who was going to fit a helicoil for me, but it seems from what people are saying that is a bad idea? So Ill try the and epoxy technique and hope for the best...
Thanks again
Jim
__________________
"If we don't find something good at least we will find something new." Voltaire
Reply With Quote
  #10  
Old 17 Apr 2007
Registered Users
Veteran HUBBer
 
Join Date: Apr 2003
Location: Cape Town, South Africa
Posts: 303
You have to be very careful with a tapered plug especially if you don't cut the thread but try to use the plug as cutting tool. Cast Aluminium is quite hard and might crack if you force the plug in without having cut a proper thread as suggested by Harleyrider.
Steel tapered plugs are also problematic in aluminium alloy as they tend to come loose and fall out caused by different thermal expansion.
A cylindrical thread and copper or aluminium washer are to prefer.
Reply With Quote
  #11  
Old 17 Apr 2007
*Touring Ted*'s Avatar
Contributing Member
Veteran HUBBer
 
Join Date: Jul 2005
Location: Wirral, England.
Posts: 5,654
Jeeez..

You said your last helicoil was a disaster so why are you doing it again ????:confused1: Helicoils are crap, especially in alloy.

Expoxy is a bodge and is more than likely going to fail with constant oil contamination and heat (be lucky a blob doesnt fall off and get stuck in an oil jet)

The only real solution is to tap out a larger thread and install an oversize bolt.

It can be any bolt as long as its the correct thread and you use a copper washer.
__________________
Did some trips.
Rode some bikes.
Fix them for a living.
Can't say anymore.
Reply With Quote
  #12  
Old 17 Apr 2007
jim jim is offline
Gold Member
Veteran HUBBer
 
Join Date: Aug 2003
Location: Cape Town South Africa
Posts: 222
Talking

Ok, so heres what ive done:

I have this thread repair 2 part stuff that promises to rebuild stripped threads to the point that they can be torqued again...ja right. But, what ive done is reinserted the insert (because its longer than the original sump plug and so has more thread making contact). I found to my delight that that there is still a little good thread in the casing so ive covered the insert with my superman thread fix (as though it were Loctite) and screwedthe sucker in as tight as i dare. Then I took Pattex steel repair epoxy and covered the whole mess up real good. If we all think positive thoughts it will hold forever.

Le Cap and everyone else, thanks a million. Grant you and your website rock!

Jim

PS Le Cap, you proably know the "mechanic" who did my engine... I heard he came off his bike just afterwards and he dont look so pretty no more.
__________________
"If we don't find something good at least we will find something new." Voltaire
Reply With Quote
  #13  
Old 17 Apr 2007
*Touring Ted*'s Avatar
Contributing Member
Veteran HUBBer
 
Join Date: Jul 2005
Location: Wirral, England.
Posts: 5,654
Its no surprise he came off his bike if he does his own repairs !!


I think you may really regret using that epoxy. How are you going to change the oil ??

The top drain bolt only empties whats in the frame.
__________________
Did some trips.
Rode some bikes.
Fix them for a living.
Can't say anymore.
Reply With Quote
  #14  
Old 18 Apr 2007
Registered Users
Veteran HUBBer
 
Join Date: Dec 2006
Location: In Ireland and loving it !
Posts: 191
Hey Jim

Keep it rockin man
__________________
Life is for Living - so Live
Reply With Quote
  #15  
Old 18 Apr 2007
jim jim is offline
Gold Member
Veteran HUBBer
 
Join Date: Aug 2003
Location: Cape Town South Africa
Posts: 222
Change the oil? Well, you see i have a cunning plan; Ill drain the oil tank, that giives around 1L, then i replace drain bolt, run her for a minute and drain whats in the tank then, which gives another half litre or so. So i can drain about 1.8 litres (Ive tried it already and it works) and replace that every 2000km and I figure its better than nothing. So you going to say now Im mad to run the engine a second time after draining a litre, but running 1 minute minus 1L surely wont do any damage.?
You see I couldnt re tap that thread because the genius who stripped the thread the second time already re tapped to 16mm which doesnt leave me with much meat to tap again...
Just tell me it will be ok.
JIm

5 Eyes, where the hell are you man, your s getting warm, er well actually I drank it already, but theres another one i think.
__________________
"If we don't find something good at least we will find something new." Voltaire
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 Registered Users and/or Members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Malawi Heath Advisory Rene Cormier sub-Saharan Africa 11 3 May 2007 15:48
removing the spark plug!!! HELP! narkotik666 Yamaha Tech 9 26 Apr 2007 22:01
Garmin/DIN plug? Col Campbell Equipping the Overland Vehicle 10 19 Dec 2004 04:57
gunk around spark plug dougM Yamaha Tech 4 16 Oct 2001 00:10
Spark plug fouling on DR 250 Roger Hogg Suzuki Tech 8 29 May 2001 05:59

 
 

Announcements

Thinking about traveling? Not sure about the whole thing? Watch the HU Achievable Dream Video Trailers and then get ALL the information you need to get inspired and learn how to travel anywhere in the world!

Have YOU ever wondered who has ridden around the world? We did too - and now here's the list of Circumnavigators!
Check it out now
, and add your information if we didn't find you.

Next HU Eventscalendar

HU Event and other updates on the HUBB Forum "Traveller's Advisories" thread.
ALL Dates subject to change.

2024:

Add yourself to the Updates List for each event!

Questions about an event? Ask here

HUBBUK: info

See all event details

 
World's most listened to Adventure Motorbike Show!
Check the RAW segments; Grant, your HU host is on every month!
Episodes below to listen to while you, err, pretend to do something or other...

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

"Ultimate global guide for red-blooded bikers planning overseas exploration. Covers choice & preparation of best bike, shipping overseas, baggage design, riding techniques, travel health, visas, documentation, safety and useful addresses." Recommended. (Grant)



Ripcord Rescue Travel Insurance.

Ripcord Rescue Travel Insurance™ combines into a single integrated program the best evacuation and rescue with the premier travel insurance coverages designed for adventurers.

Led by special operations veterans, Stanford Medicine affiliated physicians, paramedics and other travel experts, Ripcord is perfect for adventure seekers, climbers, skiers, sports enthusiasts, hunters, international travelers, humanitarian efforts, expeditions and more.

Ripcord travel protection is now available for ALL nationalities, and travel is covered on motorcycles of all sizes!


 

What others say about HU...

"This site is the BIBLE for international bike travelers." Greg, Australia

"Thank you! The web site, The travels, The insight, The inspiration, Everything, just thanks." Colin, UK

"My friend and I are planning a trip from Singapore to England... We found (the HU) site invaluable as an aid to planning and have based a lot of our purchases (bikes, riding gear, etc.) on what we have learned from this site." Phil, Australia

"I for one always had an adventurous spirit, but you and Susan lit the fire for my trip and I'll be forever grateful for what you two do to inspire others to just do it." Brent, USA

"Your website is a mecca of valuable information and the (video) series is informative, entertaining, and inspiring!" Jennifer, Canada

"Your worldwide organisation and events are the Go To places to for all serious touring and aspiring touring bikers." Trevor, South Africa

"This is the answer to all my questions." Haydn, Australia

"Keep going the excellent work you are doing for Horizons Unlimited - I love it!" Thomas, Germany

Lots more comments here!



Five books by Graham Field!

Diaries of a compulsive traveller
by Graham Field
Book, eBook, Audiobook

"A compelling, honest, inspiring and entertaining writing style with a built-in feel-good factor" Get them NOW from the authors' website and Amazon.com, Amazon.ca, Amazon.co.uk.



Back Road Map Books and Backroad GPS Maps for all of Canada - a must have!

New to Horizons Unlimited?

New to motorcycle travelling? New to the HU site? Confused? Too many options? It's really very simple - just 4 easy steps!

Horizons Unlimited was founded in 1997 by Grant and Susan Johnson following their journey around the world on a BMW R80G/S.

Susan and Grant Johnson Read more about Grant & Susan's story

Membership - help keep us going!

Horizons Unlimited is not a big multi-national company, just two people who love motorcycle travel and have grown what started as a hobby in 1997 into a full time job (usually 8-10 hours per day and 7 days a week) and a labour of love. To keep it going and a roof over our heads, we run events all over the world with the help of volunteers; we sell inspirational and informative DVDs; we have a few selected advertisers; and we make a small amount from memberships.

You don't have to be a Member to come to an HU meeting, access the website, or ask questions on the HUBB. What you get for your membership contribution is our sincere gratitude, good karma and knowing that you're helping to keep the motorcycle travel dream alive. Contributing Members and Gold Members do get additional features on the HUBB. Here's a list of all the Member benefits on the HUBB.




All times are GMT +1. The time now is 16:15.