Go Back   Horizons Unlimited - The HUBB > Technical, Bike forums > Yamaha Tech
Yamaha Tech Originally the Yamaha XT600 Tech Forum, due to demand it now includes all Yamaha's technical / mechanical / repair / preparation questions.
Photo by Daniel Rintz, Himba children, Namibia

The only impossible journey
is the one
you never begin

Photo by Daniel Rintz,
Himba children, Namibia



Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 19 Oct 2008
Contributing Member
HUBB regular
 
Join Date: Mar 2008
Location: Bathgate, Scotland
Posts: 44
Indicators on a 1990 Tenere 3AJ

Hi,

I've been lurking on the HUBB for a while trying to decide which bike to buy and i've finally bought myself a 1990 XT 600 Tenere 3AJ. The idea is to get it mot'd, use it through winter, then a rebuild in the spring, and possibly a rtw trip after that. It was bought off ebay and I had to travel down from Scotland to Birmingham to get it, which took about 12 hours on Friday. Typically on the first corner the bike fell over, but after some readjustment was fine for the rest of the trip, and no damage was done.

I got home at almost 2am so left the bike in the van overnight, as i had been pndering how i was going to get it out when i have no ramp, or handy plank like the guy i bought it from. Fortunately where i live in Bathgate is still under construction so i chose the highest kerb i could find which meant parking the van diagonally across a junction, then sitting a pallet at the rear doors to make an easier step down. Luckily the road is very quiet. At this point i realised that i couldn't undo the ratchet straps so i had to run home, get a pair of scissors as a last resort, and a socket set. I managed to undo the bolts holding the eyes in the floor of the van so it saved me cutting the straps. After that the bike came out easy, i was surprised to find it so much easier and lighter to move than my CBF1000, despite the extra height.

I've read through all 85 pages of the Yamaha section and managed to find an owners manual to download, but i've not been able to find a working link for a workshop manual. Could anyone point me in the direction of one please? I'll try a Yamaha dealer tomorrow in the hope they have one but i'm doubtful.

The bike is complete, but looks a little rough, most of the fairing bolts seem to be missing but that should be an easy fix. More pressing problmes are the indicators do not work, neither does the speedo, nor the tacho, and all the dash lights except for the high beam indicator.

I've found and replaced the fuse, and taken apart the switch box on the handlebar to check for loose connections, but nothing so far. I've ordered a flasher unit in case it's that, and it'll let me test out how one of the online parts places are. If it's not that does anyone have any idea's what it may be?

I'll try to add a pic when i've cleaned the bike up, the colour is a deep blue so not like the normal pale blue and yellow these bikes mostly seem to be.

Safe riding.

Euan
Reply With Quote
  #2  
Old 19 Oct 2008
Tenere Tom's Avatar
Registered Users
Veteran HUBBer
 
Join Date: Aug 2007
Location: Leeds UK
Posts: 449
Welcome to the madhouse!!!
__________________
Tom
I'm a country member...
Reply With Quote
  #3  
Old 20 Oct 2008
Registered Users
HUBB regular
 
Join Date: Jun 2008
Location: Norfolk, UK
Posts: 44
theres a couple of bits in here that might be relevant for you.

Owners Manual

Pete
Reply With Quote
  #4  
Old 20 Oct 2008
Registered Users
Veteran HUBBer
 
Join Date: Sep 2006
Location: Edinburgh
Posts: 106
Hi, I live in Edinburgh and have a 1989 3AJ, if there's bits you want to swap off etc to check that yours work then let me know. On mine the neutral light has never worked, I assume it has something to do with a previous owner disabling the "won't-start-in-gear" switch that lurks in the gearbox somewhere and is prone to failure.

My dash lights go off sometimes because the connector plug gets pulled apart from time to time when turning that bars. There are a lot of connectors down there and the tacho and speedo can be working without the dash' lights connector.

Dodgy connections is the most likely cause of not working indicators, maybe a duff earth or connection on the flasher? If only one indicator is working it will turn on and then never flash, so you must have something that is affecting both.

The speedo is cable driven so if the cable is connected ok then perhaps there's something up inside the speedo/tacho casing?

This is me sort of thinking out loud to you, apologies if it's all stuff you've tried already. It sounds like the kind of thing you'll have to go through with a test lamp/multimeter though:-(
Reply With Quote
  #5  
Old 20 Oct 2008
Contributing Member
HUBB regular
 
Join Date: Mar 2008
Location: Bathgate, Scotland
Posts: 44
Thanks for the replies so far guys, i've checked out various things but not found a fault yet. I'm tempted to think it's the flasher unit as none of the indicators will flash at all, but all the other lights are fine. The flasher unit may arrive tomorrow and i'll retest once thats been fitted.

I called a dealer today and they said they had a service/maintenance/workshop manual for my bike so i bought it and i should get it in the next few days. I'm tending to look at this as i get to play with my cake then i get to eat it, so it's a healthy fun experience troubleshooting like this.

Alex, once my bike is up and running with a new mot i'll be taking it in to the city centre most days, so it would be good to meet up and have a look at yours. Or having read your post, if you still need a garage to do the work on your choke cable you're welcome to come out and use mine in Bathgate.

Euan
Reply With Quote
  #6  
Old 28 Oct 2008
Contributing Member
HUBB regular
 
Join Date: Mar 2008
Location: Bathgate, Scotland
Posts: 44
Fixed

I managed to solve the problem with my indicators tonight. It turned out it was the switch that was faulty, so i'd taken it all off the bike for a better look.

A dealer quoted me £75 for a new one, and there was one on ebay for around £30 secondhand, but i wanted to try to fix it myself. The actual problem turned out to be the centre contact on the sliding part of the switch itself. The middle contact was worn and was therefore not being touched and not creating the circuit. I tried to cut a bit of copper to shape but it was too thick, so i resorted to adding a piece of solder to make the circuit.

It's all back on the bike now and still working, so roll on the MOT at the weekend.

Euan
Reply With Quote
  #7  
Old 29 Oct 2008
Registered Users
Veteran HUBBer
 
Join Date: Sep 2006
Location: Edinburgh
Posts: 106
The solder blob trick!

I just came up with the same solder blob bodge on mine a few weeks ago too. I had a slightly different failure mode so I didn't think of it as the problem you had.

I managed without a garage the other weekend, and now the choke seems to be working again.

Some of us Edinburgh (ish) types are meeting at Cafe Royale tomorrow night if you wanted to meet up. Otherwise, join the Edinburgh HUBB community mailing list to fid out the date of the next pub meet.
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 Registered Users and/or Members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Bigger screen for 1990 tenere Honybadger Yamaha Tech 3 16 May 2008 22:51
Indicators Bonfireboy Yamaha Tech 5 30 Dec 2007 13:53
1990 Tenere Owner's Manual? TahoeTenere Yamaha Tech 1 12 Feb 2006 09:42

 
 

Announcements

Thinking about traveling? Not sure about the whole thing? Watch the HU Achievable Dream Video Trailers and then get ALL the information you need to get inspired and learn how to travel anywhere in the world!

Have YOU ever wondered who has ridden around the world? We did too - and now here's the list of Circumnavigators!
Check it out now
, and add your information if we didn't find you.

Next HU Eventscalendar

HU Event and other updates on the HUBB Forum "Traveller's Advisories" thread.
ALL Dates subject to change.

2024:

Add yourself to the Updates List for each event!

Questions about an event? Ask here

HUBBUK: info

See all event details

 
World's most listened to Adventure Motorbike Show!
Check the RAW segments; Grant, your HU host is on every month!
Episodes below to listen to while you, err, pretend to do something or other...

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

"Ultimate global guide for red-blooded bikers planning overseas exploration. Covers choice & preparation of best bike, shipping overseas, baggage design, riding techniques, travel health, visas, documentation, safety and useful addresses." Recommended. (Grant)



Ripcord Rescue Travel Insurance.

Ripcord Rescue Travel Insurance™ combines into a single integrated program the best evacuation and rescue with the premier travel insurance coverages designed for adventurers.

Led by special operations veterans, Stanford Medicine affiliated physicians, paramedics and other travel experts, Ripcord is perfect for adventure seekers, climbers, skiers, sports enthusiasts, hunters, international travelers, humanitarian efforts, expeditions and more.

Ripcord travel protection is now available for ALL nationalities, and travel is covered on motorcycles of all sizes!


 

What others say about HU...

"This site is the BIBLE for international bike travelers." Greg, Australia

"Thank you! The web site, The travels, The insight, The inspiration, Everything, just thanks." Colin, UK

"My friend and I are planning a trip from Singapore to England... We found (the HU) site invaluable as an aid to planning and have based a lot of our purchases (bikes, riding gear, etc.) on what we have learned from this site." Phil, Australia

"I for one always had an adventurous spirit, but you and Susan lit the fire for my trip and I'll be forever grateful for what you two do to inspire others to just do it." Brent, USA

"Your website is a mecca of valuable information and the (video) series is informative, entertaining, and inspiring!" Jennifer, Canada

"Your worldwide organisation and events are the Go To places to for all serious touring and aspiring touring bikers." Trevor, South Africa

"This is the answer to all my questions." Haydn, Australia

"Keep going the excellent work you are doing for Horizons Unlimited - I love it!" Thomas, Germany

Lots more comments here!



Five books by Graham Field!

Diaries of a compulsive traveller
by Graham Field
Book, eBook, Audiobook

"A compelling, honest, inspiring and entertaining writing style with a built-in feel-good factor" Get them NOW from the authors' website and Amazon.com, Amazon.ca, Amazon.co.uk.



Back Road Map Books and Backroad GPS Maps for all of Canada - a must have!

New to Horizons Unlimited?

New to motorcycle travelling? New to the HU site? Confused? Too many options? It's really very simple - just 4 easy steps!

Horizons Unlimited was founded in 1997 by Grant and Susan Johnson following their journey around the world on a BMW R80G/S.

Susan and Grant Johnson Read more about Grant & Susan's story

Membership - help keep us going!

Horizons Unlimited is not a big multi-national company, just two people who love motorcycle travel and have grown what started as a hobby in 1997 into a full time job (usually 8-10 hours per day and 7 days a week) and a labour of love. To keep it going and a roof over our heads, we run events all over the world with the help of volunteers; we sell inspirational and informative DVDs; we have a few selected advertisers; and we make a small amount from memberships.

You don't have to be a Member to come to an HU meeting, access the website, or ask questions on the HUBB. What you get for your membership contribution is our sincere gratitude, good karma and knowing that you're helping to keep the motorcycle travel dream alive. Contributing Members and Gold Members do get additional features on the HUBB. Here's a list of all the Member benefits on the HUBB.




All times are GMT +1. The time now is 06:59.