Go Back   Horizons Unlimited - The HUBB > Technical, Bike forums > Yamaha Tech
Yamaha Tech Originally the Yamaha XT600 Tech Forum, due to demand it now includes all Yamaha's technical / mechanical / repair / preparation questions.
Photo by Daniel Rintz, Himba children, Namibia

The only impossible journey
is the one
you never begin

Photo by Daniel Rintz,
Himba children, Namibia



Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 2 Sep 2008
Registered Users
New on the HUBB
 
Join Date: Dec 2006
Location: Western Australia
Posts: 12
Question Help! XTZ660 3YF engine problems

Hi, I was hoping someone could offer some advice to get my bike running again. I've just changed the head gasket, and when i ran the bike for the first time, there was a fair amount of noise coming from the top end. I checked that oil was getting up there, so decided it must be the valve clearances. So i rechecked these, ensuring the engine was at TDC just after the intake valves had shut. I tried to set them on the tight side, by tightening them down onto a 0.1mm feeler gauge for the intakes, and 0.15mm on the exhaust side. There was a fair amount of drag on the gauges as i pulled them out. When i went to restart the engine, it wouldn't; instead it occasionally produced a sound like a gunshot. I'm now unsure what to do - i didn't alter the valve clearances that much, maybe half a turn each, and suddenly the bike won't run. Have i made a classic mistake somewhere here? I'm pretty sure i got the cam back in the right position, as i marked the cam sprocket and before i took it out, and it went back in the same position. And it did run and rev up ok when I initially tried it. Any suggestions woud be appreciated.
Reply With Quote
  #2  
Old 2 Sep 2008
Mr. Ron's Avatar
Registered Users
Veteran HUBBer
 
Join Date: Oct 2003
Location: Vancouver, BC, for now...
Posts: 792
Unhappy

Did you mach up the timing marks on the sprockets or just your own timing marks? Check your compression, i think you might have screwed up your timing and hit a valve. I hope i'm wrong... Having never worked on this motor, i'm not sure if you have a timing chain or gears, but the marks must match up in the right position at TDC, or something catastrophic may happen. Is this the new Tenere? Head gasket already?
Reply With Quote
  #3  
Old 2 Sep 2008
Registered Users
New on the HUBB
 
Join Date: Dec 2006
Location: Western Australia
Posts: 12
Cheers for the reply.

There's a plug in the crankcase that you take out and you can then see when the engine's at TDC as there's a mark that you line up with a notch. So i did that, then i marked the cam sprocket before i removed it so i'd be able to reloate it. It all looked fine once i'd reassembled it, and the cam chain was nice and tight. I cranked the engine a few times by hand to make sure it turned ok and the valves moved as expected. it did run ok when i first tried it, it just made a tapping sound like the top end was dry or the valve clearances were too wide. So thats when I adjusted the clearances, which appears to have been a backward step. I didn't adjust the clearances that much, so I'm surprised if they've gone from too loose to too tight. I'll try and get a compression meter....

It was a spare engine i got with the bike, I think its a 1992. I swapped the engines as the original (1991) one was burning a fair amount of oil. This engine ran fine for about 500 miles then the gasket started leaking.

Last edited by jontyboy1979; 2 Sep 2008 at 17:23. Reason: forgot something
Reply With Quote
  #4  
Old 3 Sep 2008
Mr. Ron's Avatar
Registered Users
Veteran HUBBer
 
Join Date: Oct 2003
Location: Vancouver, BC, for now...
Posts: 792
Okay, so it sounds like the timing is fine, but you need to confirm this by looking at the machined marks on the sprocket. Are you sure you adjusted the valves on TDC of the power stroke and not the exhaust stroke? Also, any chance you may of blocked off an oil passage by placing a gasket up-side down? It sounds like you may have to start tearing into the motor again and find your problem before you create more damage. Are you following a book, like clymer or Chiltons? They're sound investments and very handy.
Reply With Quote
  #5  
Old 3 Sep 2008
Registered Users
New on the HUBB
 
Join Date: Dec 2006
Location: Western Australia
Posts: 12
Hi again, yes I'll have to have another look. I'll compare the valve clearances / cam position at TDC etc with a spare engine i've got in the garage (the bike's original one which was using a bit of oil but was otherwise sound). Thanks for your help, i'll let you know what the problem is when i eventually find out.
Reply With Quote
  #6  
Old 8 Sep 2008
Registered Users
HUBB regular
 
Join Date: Aug 2002
Location: Larne, N.Ireland
Posts: 68
Question Just thinking

Hi - I was just reading your posts since I ride the same bike.

I have always been inclined to keep the valve clearances towards the upper limit (ie. wider)
If you make them too tight then you don't allow for thermal expansion.
There is the chance that when the engine gets hot, and the clearances get taken up, you might perhaps end up holding the valve open a little fraction.
This in turn would let hot gasses past the seat and valve face burning these and destroying the good seal.


Mine are set at 0.15mm for the inlets and 0.2mm for the exhausts. And no rattly noise.
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 Registered Users and/or Members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
problems with honda dominator( engine stall) alcasi Honda Tech 3 1 Jun 2007 18:17
XTZ660 starting problems snoop Yamaha Tech 2 8 Apr 2007 10:17
New engine teething problems? prolificbrown SOUTH AMERICA 2 30 Aug 2004 03:00
XTZ660 -91 Engine in a TT600 -83 frame? ledning Yamaha Tech 1 18 Feb 2004 20:28
bmw r80 gs: engine problems esteban BMW Tech 6 8 Oct 2002 05:02

 
 

Announcements

Thinking about traveling? Not sure about the whole thing? Watch the HU Achievable Dream Video Trailers and then get ALL the information you need to get inspired and learn how to travel anywhere in the world!

Have YOU ever wondered who has ridden around the world? We did too - and now here's the list of Circumnavigators!
Check it out now
, and add your information if we didn't find you.

Next HU Eventscalendar

HU Event and other updates on the HUBB Forum "Traveller's Advisories" thread.
ALL Dates subject to change.

2024:

Add yourself to the Updates List for each event!

Questions about an event? Ask here

HUBBUK: info

See all event details

 
World's most listened to Adventure Motorbike Show!
Check the RAW segments; Grant, your HU host is on every month!
Episodes below to listen to while you, err, pretend to do something or other...

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

"Ultimate global guide for red-blooded bikers planning overseas exploration. Covers choice & preparation of best bike, shipping overseas, baggage design, riding techniques, travel health, visas, documentation, safety and useful addresses." Recommended. (Grant)



Ripcord Rescue Travel Insurance.

Ripcord Rescue Travel Insurance™ combines into a single integrated program the best evacuation and rescue with the premier travel insurance coverages designed for adventurers.

Led by special operations veterans, Stanford Medicine affiliated physicians, paramedics and other travel experts, Ripcord is perfect for adventure seekers, climbers, skiers, sports enthusiasts, hunters, international travelers, humanitarian efforts, expeditions and more.

Ripcord travel protection is now available for ALL nationalities, and travel is covered on motorcycles of all sizes!


 

What others say about HU...

"This site is the BIBLE for international bike travelers." Greg, Australia

"Thank you! The web site, The travels, The insight, The inspiration, Everything, just thanks." Colin, UK

"My friend and I are planning a trip from Singapore to England... We found (the HU) site invaluable as an aid to planning and have based a lot of our purchases (bikes, riding gear, etc.) on what we have learned from this site." Phil, Australia

"I for one always had an adventurous spirit, but you and Susan lit the fire for my trip and I'll be forever grateful for what you two do to inspire others to just do it." Brent, USA

"Your website is a mecca of valuable information and the (video) series is informative, entertaining, and inspiring!" Jennifer, Canada

"Your worldwide organisation and events are the Go To places to for all serious touring and aspiring touring bikers." Trevor, South Africa

"This is the answer to all my questions." Haydn, Australia

"Keep going the excellent work you are doing for Horizons Unlimited - I love it!" Thomas, Germany

Lots more comments here!



Five books by Graham Field!

Diaries of a compulsive traveller
by Graham Field
Book, eBook, Audiobook

"A compelling, honest, inspiring and entertaining writing style with a built-in feel-good factor" Get them NOW from the authors' website and Amazon.com, Amazon.ca, Amazon.co.uk.



Back Road Map Books and Backroad GPS Maps for all of Canada - a must have!

New to Horizons Unlimited?

New to motorcycle travelling? New to the HU site? Confused? Too many options? It's really very simple - just 4 easy steps!

Horizons Unlimited was founded in 1997 by Grant and Susan Johnson following their journey around the world on a BMW R80G/S.

Susan and Grant Johnson Read more about Grant & Susan's story

Membership - help keep us going!

Horizons Unlimited is not a big multi-national company, just two people who love motorcycle travel and have grown what started as a hobby in 1997 into a full time job (usually 8-10 hours per day and 7 days a week) and a labour of love. To keep it going and a roof over our heads, we run events all over the world with the help of volunteers; we sell inspirational and informative DVDs; we have a few selected advertisers; and we make a small amount from memberships.

You don't have to be a Member to come to an HU meeting, access the website, or ask questions on the HUBB. What you get for your membership contribution is our sincere gratitude, good karma and knowing that you're helping to keep the motorcycle travel dream alive. Contributing Members and Gold Members do get additional features on the HUBB. Here's a list of all the Member benefits on the HUBB.




All times are GMT +1. The time now is 13:00.