Go Back   Horizons Unlimited - The HUBB > Technical, Bike forums > Yamaha Tech
Yamaha Tech Originally the Yamaha XT600 Tech Forum, due to demand it now includes all Yamaha's technical / mechanical / repair / preparation questions.
Photo by Daniel Rintz, Himba children, Namibia

The only impossible journey
is the one
you never begin

Photo by Daniel Rintz,
Himba children, Namibia



Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 28 Nov 2007
Registered Users
New on the HUBB
 
Join Date: Oct 2006
Location: Denton TX USA
Posts: 11
help with carb synching

I have an 1984 xt600 US model. It has the two barrel carb. The one with the CV secondary.

The Clymer manual says to

1. open the primary .20inches
2. adjust the synch screw so that it just makes contact with the secondary linkage
3. when the primary is fully open the secondary air valve should be horizontal.

Problem is that when I set the synch screw to where it just touches the linkage, the secondary air valve is way past horizontal at WFO.

If I set the synch screw so that the secondary air valve is horizontal at WFO on the primary, then the linkage does not make contact until 1/2 throttle according to the primary slide.

The secondary shaft is fixed and the linkage has no adjustment. Nothing is missing and not worn out. Bike has 5500 miles on it.

If I set the synch so that the air valve is horizontal at WFO(and secondary not moving until 1/2 throttle on the primary), Im assuming Im going to get a big bog.

What is more important? The timing of WHEN the secondary air valve moves or its FINAL POSITION at WFO?

Thanks in advance.
Reply With Quote
  #2  
Old 28 Nov 2007
Registered Users
Veteran HUBBer
 
Join Date: Aug 2007
Location: Sax, Spain
Posts: 901
there is more info here

http://www.horizonsunlimited.com/hub...ut-65mph-23582

hope this helps

Martyn
Reply With Quote
  #3  
Old 28 Nov 2007
Registered Users
New on the HUBB
 
Join Date: Oct 2006
Location: Denton TX USA
Posts: 11
Goofy thing is that the bike runs fine. I just took the carb off to replace the bowl gasket. I noticed that there was a synchronization section in the manual. I decided to see if mine needed adjustment. Thats when I noticed how far off the air valve was at WFO. Im just wondering if I am losing some full throttle performance by having the air valve significantly past horizontal.
Reply With Quote
  #4  
Old 28 Nov 2007
Registered Users
Veteran HUBBer
 
Join Date: Aug 2007
Location: Sax, Spain
Posts: 901
if it aint broke............

Quote:
Originally Posted by tx246 View Post
Goofy thing is that the bike runs fine.
if you were happy with it, and it zips along nice, leave it alone!
the old saying "If it ain't broke, Don't fix it" still holds true ya know. I for one should heed my own advice here, cos' im a "fiddler", i love taking my bikes to bits to see how things work or just to check stuff. sometimes I make things better! sometimes I makes things worse.............



Martyn
Reply With Quote
  #5  
Old 28 Nov 2007
Registered Users
New on the HUBB
 
Join Date: Oct 2006
Location: Denton TX USA
Posts: 11
Im assuming it runs ok as this bike has never been synched since Ive owned it. Its just that I cant adjust it in a manner that the manual calls for....not even close. At WFO the secondry air valve blocks at least 25% of the available surface area which doesnt make sense. Im going to synch it like it says in Auke's post and go from there. I think I can get at it without taking everything apart if it doesnt work out.
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 Registered Users and/or Members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Newby 1988 XT600 carb prob. TANTHONY Yamaha Tech 2 4 Mar 2007 17:50
Xt225 Serrow Carb Prob Oz Yamaha Tech 3 14 Dec 2006 03:33
KLE500 Carb balancing/set-up marlin.45 Kawasaki Tech 1 15 Nov 2006 13:35
LC4 Carb ash_d KTM Tech 13 6 Oct 2005 12:00
carb adjustment ShaunC Yamaha Tech 3 29 Apr 2004 17:11

 
 

Announcements

Thinking about traveling? Not sure about the whole thing? Watch the HU Achievable Dream Video Trailers and then get ALL the information you need to get inspired and learn how to travel anywhere in the world!

Have YOU ever wondered who has ridden around the world? We did too - and now here's the list of Circumnavigators!
Check it out now
, and add your information if we didn't find you.

Next HU Eventscalendar

HU Event and other updates on the HUBB Forum "Traveller's Advisories" thread.
ALL Dates subject to change.

2024:

Add yourself to the Updates List for each event!

Questions about an event? Ask here

HUBBUK: info

See all event details

 
World's most listened to Adventure Motorbike Show!
Check the RAW segments; Grant, your HU host is on every month!
Episodes below to listen to while you, err, pretend to do something or other...

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

"Ultimate global guide for red-blooded bikers planning overseas exploration. Covers choice & preparation of best bike, shipping overseas, baggage design, riding techniques, travel health, visas, documentation, safety and useful addresses." Recommended. (Grant)



Ripcord Rescue Travel Insurance.

Ripcord Rescue Travel Insurance™ combines into a single integrated program the best evacuation and rescue with the premier travel insurance coverages designed for adventurers.

Led by special operations veterans, Stanford Medicine affiliated physicians, paramedics and other travel experts, Ripcord is perfect for adventure seekers, climbers, skiers, sports enthusiasts, hunters, international travelers, humanitarian efforts, expeditions and more.

Ripcord travel protection is now available for ALL nationalities, and travel is covered on motorcycles of all sizes!


 

What others say about HU...

"This site is the BIBLE for international bike travelers." Greg, Australia

"Thank you! The web site, The travels, The insight, The inspiration, Everything, just thanks." Colin, UK

"My friend and I are planning a trip from Singapore to England... We found (the HU) site invaluable as an aid to planning and have based a lot of our purchases (bikes, riding gear, etc.) on what we have learned from this site." Phil, Australia

"I for one always had an adventurous spirit, but you and Susan lit the fire for my trip and I'll be forever grateful for what you two do to inspire others to just do it." Brent, USA

"Your website is a mecca of valuable information and the (video) series is informative, entertaining, and inspiring!" Jennifer, Canada

"Your worldwide organisation and events are the Go To places to for all serious touring and aspiring touring bikers." Trevor, South Africa

"This is the answer to all my questions." Haydn, Australia

"Keep going the excellent work you are doing for Horizons Unlimited - I love it!" Thomas, Germany

Lots more comments here!



Five books by Graham Field!

Diaries of a compulsive traveller
by Graham Field
Book, eBook, Audiobook

"A compelling, honest, inspiring and entertaining writing style with a built-in feel-good factor" Get them NOW from the authors' website and Amazon.com, Amazon.ca, Amazon.co.uk.



Back Road Map Books and Backroad GPS Maps for all of Canada - a must have!

New to Horizons Unlimited?

New to motorcycle travelling? New to the HU site? Confused? Too many options? It's really very simple - just 4 easy steps!

Horizons Unlimited was founded in 1997 by Grant and Susan Johnson following their journey around the world on a BMW R80G/S.

Susan and Grant Johnson Read more about Grant & Susan's story

Membership - help keep us going!

Horizons Unlimited is not a big multi-national company, just two people who love motorcycle travel and have grown what started as a hobby in 1997 into a full time job (usually 8-10 hours per day and 7 days a week) and a labour of love. To keep it going and a roof over our heads, we run events all over the world with the help of volunteers; we sell inspirational and informative DVDs; we have a few selected advertisers; and we make a small amount from memberships.

You don't have to be a Member to come to an HU meeting, access the website, or ask questions on the HUBB. What you get for your membership contribution is our sincere gratitude, good karma and knowing that you're helping to keep the motorcycle travel dream alive. Contributing Members and Gold Members do get additional features on the HUBB. Here's a list of all the Member benefits on the HUBB.




All times are GMT +1. The time now is 09:02.