Go Back   Horizons Unlimited - The HUBB > Technical, Bike forums > Yamaha Tech
Yamaha Tech Originally the Yamaha XT600 Tech Forum, due to demand it now includes all Yamaha's technical / mechanical / repair / preparation questions.
Photo by Daniel Rintz, Himba children, Namibia

The only impossible journey
is the one
you never begin

Photo by Daniel Rintz,
Himba children, Namibia



Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 26 Aug 2009
Gold Member
Veteran HUBBer
 
Join Date: Aug 2008
Location: On the Road
Posts: 235
Handlebars

I've read several threads about fitting different bars to XT's so I'm keen to hear peoples' opinions.
The bike is a 2004 XT, I'm slim, 5'10" (1.78mtrs), with an inside leg of 31/32 (79/81cm) so would be interested to hear from those who've tied different bars, whether raised or not, and what the advantages or disadvantages were. Particularly if you're a similar build to me. I'm planning adventure style trips with a mix of on and off road.
Thanks in advance,

Geoff
Reply With Quote
  #2  
Old 27 Aug 2009
Matt Cartney's Avatar
Contributing Member
Veteran HUBBer
 
Join Date: Feb 2004
Location: Edinburgh, Lothian, Scotland
Posts: 1,350
Hi,

I've put the standard braced renthals on mine (gold, of course). They have improved the riding position on and off road, especially off. I have not used bar-risers at the fork, but the bars are shaped so as to be slightly wider and higher than the originals. I'd definately replace the standard bars simply because they are made of cheese and bend in a strong wind.

I'm 5' 10" with a 30" - 31" inside leg.

Matt
__________________
http://adventure-writing.blogspot.com

http://scotlandnepal.blogspot.com/

*Disclaimer* - I am not saying my bike is better than your bike. I am not saying my way is better than your way. I am not mocking your religion/politics/other belief system. When reading my post imagine me sitting behind a frothing pint of ale, smiling and offering you a bag of peanuts. This is the sentiment in which my post is made. Please accept it as such!
Reply With Quote
  #3  
Old 27 Aug 2009
YamaHead's Avatar
Registered Users
HUBB regular
 
Join Date: Feb 2009
Location: Milwaukie, OR USA
Posts: 92
Got a Alloy bar from FLY racing on my Moto.....


I'm 6'-0"....with a 32" inseam.....fits me perfect!
Reply With Quote
  #4  
Old 27 Aug 2009
motorbike mike's Avatar
Contributing Member
HUBB regular
 
Join Date: Jun 2007
Location: Reading
Posts: 76
Hi, If you've still got the standard bars I'd definitely recommend changing them, the Yamaha bars are made of monkey metal and very prone to bending if dropped. Lots of XT s have the Renthall High Dakar bars fitted, these add height which is useful if you ride standing on the pegs ( offroad) with no changes to the cable length, they are also very tough and will survive rough treatment, you also should consider brushguards as the levers are very prone to damage even on low speed drops.
Name:  Morocco2009048.jpg
Views: 415
Size:  28.5 KB


Good Luck

Mike
Reply With Quote
  #5  
Old 27 Aug 2009
Gold Member
Veteran HUBBer
 
Join Date: Aug 2008
Location: On the Road
Posts: 235
Quote:
Hi, If you've still got the standard bars I'd definitely recommend changing them, the Yamaha bars are made of monkey metal and very prone to bending if dropped. Lots of XT s have the Renthall High Dakar bars fitted, these add height which is useful if you ride standing on the pegs ( offroad) with no changes to the cable length, they are also very tough and will survive rough treatment, you also should consider brushguards as the levers are very prone to damage even on low speed drops.
I've been looking at the Dakars and they seem to be a good choice - even come in blue.
I'm inclined to think that for tarmac comfort, risers might not be a good idea? Comments welcome on that aspect.

Geoff
Reply With Quote
  #6  
Old 29 Aug 2009
Gold Member
Veteran HUBBer
 
Join Date: Aug 2008
Location: On the Road
Posts: 235
I've now ordered the Renthal Dakars, in silver, and I'll post again when I've had a chance to try them.

Geoff
Reply With Quote
  #7  
Old 30 Aug 2009
motorbike mike's Avatar
Contributing Member
HUBB regular
 
Join Date: Jun 2007
Location: Reading
Posts: 76
Geoff, The Dakars are higher than the standard bars anyway - so you wont need bar risers, I'm 6ft 1" and the bars are just slightly low when I'm stood up on the pegs - they should be perfect for your height. Grant did a great presentation on bike ergonomics down at the Malage HU meet last year, might be worth trolling around the site to see if you can find some more details on that. Don't forget that you can adjust reach and height , to a degree, by turning the bars in the yokes, just sit on the bike and move the bars until it suits you.
Mike
Reply With Quote
  #8  
Old 30 Aug 2009
Gold Member
Veteran HUBBer
 
Join Date: Aug 2008
Location: On the Road
Posts: 235
Quote:
Geoff, The Dakars are higher than the standard bars anyway - so you wont need bar risers, I'm 6ft 1" and the bars are just slightly low when I'm stood up on the pegs - they should be perfect for your height. Grant did a great presentation on bike ergonomics down at the Malage HU meet last year, might be worth trolling around the site to see if you can find some more details on that. Don't forget that you can adjust reach and height , to a degree, by turning the bars in the yokes, just sit on the bike and move the bars until it suits you.
Mike
Thanks Mike. Sound advice and I'll experiment to get the right position. Sitting on the bike in standard trim, I do get the impression that risers are unlikely to be needed.

Geoff
Reply With Quote
  #9  
Old 29 Nov 2009
Gold Member
Veteran HUBBer
 
Join Date: Aug 2008
Location: On the Road
Posts: 235
Renthals on

Well, I've finally got around to fitting the Renthals and very nice they look too.
This now brings forth some further questions:
1. The bar end weights from the Yamaha don't fit the Renthals as the internal diameter is 4mm less so is there a way of fitting the original weights?
2. I haven't ridden it yet but I'm wondering what others have found with regard to vibration. Is it worse without the bar end weights or do the Renthals absorb it somehow? In other words, are the weights needed?
3. I am interested in fitting Barkbusters, as suggested. If I do, will I be able to fit weights as well or, again, will they be needed anyway?
I know some of you have made these mods so your thoughts will be appreciated.

Cheers all,

Geoff
Reply With Quote
  #10  
Old 29 Nov 2009
Registered Users
Veteran HUBBer
 
Join Date: Aug 2009
Location: Dorset UK
Posts: 395
Geoff, the bar end weight thing is purely a matter of "suck & see" matey

As you've changed the h/bars, the resonance/frequency will alter from stock, and vibes may be better (or worse) and odds on, at a different rev range :confused1:

As covered on some previous threads, fitting bark-busters will act like bar weights, by altering the resonance pitch. SO I'd fit them first and go for a blast.

If they still vibe, try whacking some lead weights (or zinc roof flashing.. etc) in the bars, this will have the same effect as bar weights, and be cheaper. Just make sure they are a snug fit, and you can get them out again if needs be
Reply With Quote
  #11  
Old 29 Nov 2009
Gold Member
Veteran HUBBer
 
Join Date: Aug 2008
Location: On the Road
Posts: 235
Thanks for that Pigford. The Renthals have some kind of red plug about 50mm into the bar. I've no idea what it's for but it could be useful in preventing anything I put into the bars from traveling.
Now, where did I leave that leftover lead flashing?

Geoff
Reply With Quote
  #12  
Old 30 Nov 2009
Registered Users
Veteran HUBBer
 
Join Date: Oct 2009
Location: Wiltshire, UK
Posts: 118
Renthal Dakar Bars

Quote:
Originally Posted by kentbiker View Post
I've now ordered the Renthal Dakars, in silver, and I'll post again when I've had a chance to try them.

Geoff
I was considering a set of these for my 1VJ: it's was fitted with a pair of low rise Renthals which were far too low when on the pegs, so I refitted the standard bars, which are about the right height for me (5' 11' and 32" leg, blue eyes, Leo...) but of course going from alloy back to steel my bark buster inserts no longer fit - Doh! Anyone recommend a supplier of Dakar bars?
Reply With Quote
  #13  
Old 1 Dec 2009
Gold Member
Veteran HUBBer
 
Join Date: Aug 2008
Location: On the Road
Posts: 235
Renthal Dakar bars

Bob, I got mine at intobikes.co.uk :: the motorcycle parts and accessories store
They were 34.99 plus some postage.

Regards,

Geoff
Reply With Quote
  #14  
Old 2 Dec 2009
Registered Users
Veteran HUBBer
 
Join Date: Oct 2009
Location: Wiltshire, UK
Posts: 118
Thanks - that seems about the going rate.
Guess I'll bung the low ones on Fleabay to offset the cost, but I think I'd be wise to go alloy before heading off to Morocco in the Spring: a full Tenere tank will put a lot of force into the standard bars if (no, when!!) I drop it...
Reply With Quote
  #15  
Old 5 Dec 2009
Gold Member
Veteran HUBBer
 
Join Date: Aug 2008
Location: On the Road
Posts: 235
Quote:
Originally Posted by Pigford View Post
Geoff, the bar end weight thing is purely a matter of "suck & see" matey

As you've changed the h/bars, the resonance/frequency will alter from stock, and vibes may be better (or worse) and odds on, at a different rev range :confused1:

As covered on some previous threads, fitting bark-busters will act like bar weights, by altering the resonance pitch. SO I'd fit them first and go for a blast.

If they still vibe, try whacking some lead weights (or zinc roof flashing.. etc) in the bars, this will have the same effect as bar weights, and be cheaper. Just make sure they are a snug fit, and you can get them out again if needs be
I finally rode the bike today and had no problems with vibration at all. In fact, it seemed to be less than before. They also make the riding position very comfortable. I'll be fitting some heated grips soon and I think the extra thickness will make them even better.
Barkbusters next, just to top the job off. Luvverly!

Geoff
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 Registered Users and/or Members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Handlebars c-bro Equipping the Bike - what's the best gear? 8 9 Jul 2008 19:31
Alternative handlebars? Steve Pickford BMW Tech 5 31 Jul 2004 23:23
handlebars-replacements ? merlin BMW Tech 5 11 Feb 2003 04:45
Handlebars and lever protection john-l Equipping the Bike - what's the best gear? 1 28 Aug 2001 03:14
BMW 1150GS Handlebars Frank BMW Tech 1 30 Apr 2001 14:05

 
 

Announcements

Thinking about traveling? Not sure about the whole thing? Watch the HU Achievable Dream Video Trailers and then get ALL the information you need to get inspired and learn how to travel anywhere in the world!

Have YOU ever wondered who has ridden around the world? We did too - and now here's the list of Circumnavigators!
Check it out now
, and add your information if we didn't find you.

Next HU Eventscalendar

HU Event and other updates on the HUBB Forum "Traveller's Advisories" thread.
ALL Dates subject to change.

2024:

Add yourself to the Updates List for each event!

Questions about an event? Ask here

HUBBUK: info

See all event details

 
World's most listened to Adventure Motorbike Show!
Check the RAW segments; Grant, your HU host is on every month!
Episodes below to listen to while you, err, pretend to do something or other...

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

"Ultimate global guide for red-blooded bikers planning overseas exploration. Covers choice & preparation of best bike, shipping overseas, baggage design, riding techniques, travel health, visas, documentation, safety and useful addresses." Recommended. (Grant)



Ripcord Rescue Travel Insurance.

Ripcord Rescue Travel Insurance™ combines into a single integrated program the best evacuation and rescue with the premier travel insurance coverages designed for adventurers.

Led by special operations veterans, Stanford Medicine affiliated physicians, paramedics and other travel experts, Ripcord is perfect for adventure seekers, climbers, skiers, sports enthusiasts, hunters, international travelers, humanitarian efforts, expeditions and more.

Ripcord travel protection is now available for ALL nationalities, and travel is covered on motorcycles of all sizes!


 

What others say about HU...

"This site is the BIBLE for international bike travelers." Greg, Australia

"Thank you! The web site, The travels, The insight, The inspiration, Everything, just thanks." Colin, UK

"My friend and I are planning a trip from Singapore to England... We found (the HU) site invaluable as an aid to planning and have based a lot of our purchases (bikes, riding gear, etc.) on what we have learned from this site." Phil, Australia

"I for one always had an adventurous spirit, but you and Susan lit the fire for my trip and I'll be forever grateful for what you two do to inspire others to just do it." Brent, USA

"Your website is a mecca of valuable information and the (video) series is informative, entertaining, and inspiring!" Jennifer, Canada

"Your worldwide organisation and events are the Go To places to for all serious touring and aspiring touring bikers." Trevor, South Africa

"This is the answer to all my questions." Haydn, Australia

"Keep going the excellent work you are doing for Horizons Unlimited - I love it!" Thomas, Germany

Lots more comments here!



Five books by Graham Field!

Diaries of a compulsive traveller
by Graham Field
Book, eBook, Audiobook

"A compelling, honest, inspiring and entertaining writing style with a built-in feel-good factor" Get them NOW from the authors' website and Amazon.com, Amazon.ca, Amazon.co.uk.



Back Road Map Books and Backroad GPS Maps for all of Canada - a must have!

New to Horizons Unlimited?

New to motorcycle travelling? New to the HU site? Confused? Too many options? It's really very simple - just 4 easy steps!

Horizons Unlimited was founded in 1997 by Grant and Susan Johnson following their journey around the world on a BMW R80G/S.

Susan and Grant Johnson Read more about Grant & Susan's story

Membership - help keep us going!

Horizons Unlimited is not a big multi-national company, just two people who love motorcycle travel and have grown what started as a hobby in 1997 into a full time job (usually 8-10 hours per day and 7 days a week) and a labour of love. To keep it going and a roof over our heads, we run events all over the world with the help of volunteers; we sell inspirational and informative DVDs; we have a few selected advertisers; and we make a small amount from memberships.

You don't have to be a Member to come to an HU meeting, access the website, or ask questions on the HUBB. What you get for your membership contribution is our sincere gratitude, good karma and knowing that you're helping to keep the motorcycle travel dream alive. Contributing Members and Gold Members do get additional features on the HUBB. Here's a list of all the Member benefits on the HUBB.




All times are GMT +1. The time now is 14:37.