Go Back   Horizons Unlimited - The HUBB > Technical, Bike forums > Yamaha Tech
Yamaha Tech Originally the Yamaha XT600 Tech Forum, due to demand it now includes all Yamaha's technical / mechanical / repair / preparation questions.
Photo by Daniel Rintz, Himba children, Namibia

The only impossible journey
is the one
you never begin

Photo by Daniel Rintz,
Himba children, Namibia



Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 7 Feb 2001
Registered Users
Veteran HUBBer
 
Join Date: Jan 2001
Location: Stockholm
Posts: 651
spokes & xt600 type & piston & gears

Am preparing for the Amsterdam - Cape Town. Just bought 2 Tenere´s, one 55W and a 3DS (according to the serial number).

About the spokes, both bikes have alumium, I suppose alloy rims, suppose with standard spokes 3 mm. Is it advisable to replace the spokes with heavier spokes, if so, which diameter, is stainless steel better or not?

Type - I cannot find the 3DS anywhere on the internet. It is from 1989. Any known problems with this type of Tenere?

I opened up the engine of the 55W. Indeed, 3 of the five gears have serious pitting, so need to be replaced. Can I use the whole set from another XT600, ie. both shafts and gears?

Also, the piston does not look new anymore. On the loaded side one stained spot. Also, oil scraper ring does not move freely in the groove. Engine runs and starts well, no excessive smoke.
Could I just replace the piston rings, or need to rebore and fit new piston?

Thanks in advance for any advice!

Auke
__________________
Auke
http://aukemarieke.blogspot.com
Reply With Quote
  #2  
Old 9 Feb 2001
Registered Users
HUBB regular
 
Join Date: Nov 2000
Location: pittsford ny
Posts: 43

The 3DS is a Swiss version of the 3AJ - main difference is carburation for their stricter emission controls.
Reply With Quote
  #3  
Old 12 Feb 2001
KlausXT600's Avatar
Registered Users
Veteran HUBBer
 
Join Date: Sep 2000
Location: Hamburg, Germany
Posts: 295
'Is it advisable to replace the spokes with heavier spokes, if so, which diameter, is stainless steel better or not?'
i don't think it's nessesary to change the spokes to stainless. you can fit thin brass washers betwen spoke/hub (is this the right word?) and spokenut/ream. this will minimize tension. also, put plastic cable-binders (i hope you know what i mean) around each crossing of spokes. i never tried myself, but know some people who have good experience with these measures.
'Type - I cannot find the 3DS anywhere on the internet. It is from 1989. Any known problems with this type of Tenere?'
no, not realy. drive her like a ténéré should be driven and you won't get trouble. 3ds has a different carburator-adjustment for driving mainly above 1000 m above sea level.
'I opened up the engine of the 55W. Indeed, 3 of the five gears have serious pitting, so need to be replaced. Can I use the whole set
from another XT600, ie. both shafts and gears?'
according to the gears, you can use gears of any xt. but remember that the gear ratio has changed with 3AJ, so you have to adjust the secondary ratio (sprocket etc.).
you cannot use the shafts of xt e, they are longer so the chain-alignment won't fit.
avoid driving with low and very high revs.
use the proper engine-oil.
fit 14:40 secondary ratio.

'Also, the piston does not look new anymore. On the loaded side one stained spot. Also, oil scraper ring does not move freely in the
groove. Engine runs and starts well, no excessive smoke. Could I just replace the piston rings, or need to rebore and fit new piston?'
first measure the play between piston and cylinder (needs special device). if the play is above 0.08 mm (limit is 0.1 mm) you should rebore the cylinder and fit a bigger piston. important: don't trust anybody (means: measure the play again after reboring, should be 0.045 mm)!
if the play is okay, changing the piston rings should be enough. you might get a little higher oil-consumption afterwards.

regards
klaus@xt600.de
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 Registered Users and/or Members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


 
 

Announcements

Thinking about traveling? Not sure about the whole thing? Watch the HU Achievable Dream Video Trailers and then get ALL the information you need to get inspired and learn how to travel anywhere in the world!

Have YOU ever wondered who has ridden around the world? We did too - and now here's the list of Circumnavigators!
Check it out now
, and add your information if we didn't find you.

Next HU Eventscalendar

HU Event and other updates on the HUBB Forum "Traveller's Advisories" thread.
ALL Dates subject to change.

2024:

Add yourself to the Updates List for each event!

Questions about an event? Ask here

HUBBUK: info

See all event details

 
World's most listened to Adventure Motorbike Show!
Check the RAW segments; Grant, your HU host is on every month!
Episodes below to listen to while you, err, pretend to do something or other...

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

"Ultimate global guide for red-blooded bikers planning overseas exploration. Covers choice & preparation of best bike, shipping overseas, baggage design, riding techniques, travel health, visas, documentation, safety and useful addresses." Recommended. (Grant)



Ripcord Rescue Travel Insurance.

Ripcord Rescue Travel Insurance™ combines into a single integrated program the best evacuation and rescue with the premier travel insurance coverages designed for adventurers.

Led by special operations veterans, Stanford Medicine affiliated physicians, paramedics and other travel experts, Ripcord is perfect for adventure seekers, climbers, skiers, sports enthusiasts, hunters, international travelers, humanitarian efforts, expeditions and more.

Ripcord travel protection is now available for ALL nationalities, and travel is covered on motorcycles of all sizes!


 

What others say about HU...

"This site is the BIBLE for international bike travelers." Greg, Australia

"Thank you! The web site, The travels, The insight, The inspiration, Everything, just thanks." Colin, UK

"My friend and I are planning a trip from Singapore to England... We found (the HU) site invaluable as an aid to planning and have based a lot of our purchases (bikes, riding gear, etc.) on what we have learned from this site." Phil, Australia

"I for one always had an adventurous spirit, but you and Susan lit the fire for my trip and I'll be forever grateful for what you two do to inspire others to just do it." Brent, USA

"Your website is a mecca of valuable information and the (video) series is informative, entertaining, and inspiring!" Jennifer, Canada

"Your worldwide organisation and events are the Go To places to for all serious touring and aspiring touring bikers." Trevor, South Africa

"This is the answer to all my questions." Haydn, Australia

"Keep going the excellent work you are doing for Horizons Unlimited - I love it!" Thomas, Germany

Lots more comments here!



Five books by Graham Field!

Diaries of a compulsive traveller
by Graham Field
Book, eBook, Audiobook

"A compelling, honest, inspiring and entertaining writing style with a built-in feel-good factor" Get them NOW from the authors' website and Amazon.com, Amazon.ca, Amazon.co.uk.



Back Road Map Books and Backroad GPS Maps for all of Canada - a must have!

New to Horizons Unlimited?

New to motorcycle travelling? New to the HU site? Confused? Too many options? It's really very simple - just 4 easy steps!

Horizons Unlimited was founded in 1997 by Grant and Susan Johnson following their journey around the world on a BMW R80G/S.

Susan and Grant Johnson Read more about Grant & Susan's story

Membership - help keep us going!

Horizons Unlimited is not a big multi-national company, just two people who love motorcycle travel and have grown what started as a hobby in 1997 into a full time job (usually 8-10 hours per day and 7 days a week) and a labour of love. To keep it going and a roof over our heads, we run events all over the world with the help of volunteers; we sell inspirational and informative DVDs; we have a few selected advertisers; and we make a small amount from memberships.

You don't have to be a Member to come to an HU meeting, access the website, or ask questions on the HUBB. What you get for your membership contribution is our sincere gratitude, good karma and knowing that you're helping to keep the motorcycle travel dream alive. Contributing Members and Gold Members do get additional features on the HUBB. Here's a list of all the Member benefits on the HUBB.




All times are GMT +1. The time now is 09:58.