Go Back   Horizons Unlimited - The HUBB > Technical, Bike forums > Yamaha Tech
fire fire
Register FAQ Calendar Today's Posts
Yamaha Tech Originally the Yamaha XT600 Tech Forum, due to demand it now includes all Yamaha's technical / mechanical / repair / preparation questions.
Photo by Ellen Delis, Lagunas Ojos del Campo, Antofalla, Catamarca

I haven't been everywhere...
but it's on my list!


Photo by Ellen Delis,
Lagunas Ojos del Campo,
Antofalla, Catamarca



Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 10 May 2010
Registered Users
Veteran HUBBer
  
Join Date: Nov 2009
Location: christchurch newzealand
Posts: 384
fire
So I,ve just rebuilt the xt 600 after the fifth gear problem and followed the book......filled it with oil and started to crank it over by the electric motor and smoke everywhere... found a black wire coming from the loom to the negative side of the battery had completely melted the plastic coating.,
What have I done to cause such a short circuit? have I done something wrong when fitting the alternator? answers on a postcard to ......any help more than welcome
Reply With Quote
  #2  
Old 10 May 2010
Registered Users
HUBB regular
  
Join Date: Apr 2008
Location: Alesund, Norway
Posts: 53
Check all your wiring... didnt forget that big fat black groundwire that connects to the bolts holding the back of the starter? I almost did...
Reply With Quote
  #3  
Old 10 May 2010
Registered Users
Veteran HUBBer
  
Join Date: Nov 2009
Location: christchurch newzealand
Posts: 384
mine is a 2002 model and does not have the black lead just the one to the body....
Reply With Quote
  #4  
Old 10 May 2010
Registered Users
Veteran HUBBer
  
Join Date: Nov 2009
Location: christchurch newzealand
Posts: 384
Osmund you are the man......I missed that one out completely and will now connect it back up and replace the wire I burt out.....thanks again...
Reply With Quote
  #5  
Old 10 May 2010
bacardi23's Avatar
Registered Users
Veteran HUBBer
  
Join Date: Sep 2007
Location: XXX<-Portugal->Azores->Santa Maria (island)
Posts: 1,544
Don't forget to nicely weld the new wiring and fit some shrink wrap on there!

Good luck

Vando
Reply With Quote
  #6  
Old 10 May 2010
Registered Users
Veteran HUBBer
  
Join Date: Nov 2009
Location: christchurch newzealand
Posts: 384
will do..
Reply With Quote
  #7  
Old 11 May 2010
bacardi23's Avatar
Registered Users
Veteran HUBBer
  
Join Date: Sep 2007
Location: XXX<-Portugal->Azores->Santa Maria (island)
Posts: 1,544
I actually enjoy doing electric repair work... wish I could do it for ya!

I've fixed some wiring on my XT's wiring lol and I plan on checking every single piece of wiring is working good next time I head back home on the end of July.
I'll also post some pictures of my modded ligths switch!


Vando
Reply With Quote
  #8  
Old 11 May 2010
Registered Users
Veteran HUBBer
  
Join Date: Nov 2009
Location: christchurch newzealand
Posts: 384
job done and now waiting for my swinging arm bush to arrive,cranked the motor over with no plug to make sure I had good oil pressure and will ride it to break it in later this week,any body got any thoughts on how to run it in? hard or soft...?
Reply With Quote
  #9  
Old 11 May 2010
Gold Member
Veteran HUBBer
  
Join Date: Aug 2008
Location: On the Road
Posts: 235
Quote:
Originally Posted by kenymact View Post
job done and now waiting for my swinging arm bush to arrive,cranked the motor over with no plug to make sure I had good oil pressure and will ride it to break it in later this week,any body got any thoughts on how to run it in? hard or soft...?
It's always best to run in with higher revs and therefore less load on the engine. That is to say, don't slog it in at low revs in high gear. Have you replaced the pistons then?

Geoff
Reply With Quote
  #10  
Old 12 May 2010
Bobmech's Avatar
Registered Users
Veteran HUBBer
  
Join Date: Sep 2008
Location: BOP , New Zealand
Posts: 183
Quote:
Originally Posted by kenymact View Post
job done and now waiting for my swinging arm bush to arrive,cranked the motor over with no plug to make sure I had good oil pressure and will ride it to break it in later this week,any body got any thoughts on how to run it in? hard or soft...?
Hey Kenny, have a read of this Break In Secrets--How To Break In New Motorcycle and Car Engines For More Power
It's a good idea add sufficient oil & fuel, then ride it straight away(to put some load on the engine) once first started, rather than letting it warm-up first.
I have seen Jap bikes run & warmed up & checked etc after new rings fitted & then ridden. Resulting with the rings never bedding-in & a smokey engine.
Bob
__________________
Remember that Assumption is the mother of all f**k-ups.
Reply With Quote
  #11  
Old 12 May 2010
Registered Users
Veteran HUBBer
  
Join Date: Nov 2009
Location: christchurch newzealand
Posts: 384
Just replaced the two fifth gears which were badly worn and changed the camchain too as it had done 79 000 kms.

It had been worked on by the previous owner who replaced and bored out the piston to 2nd oversize but had not had the head looked at.The head was warped so I had it skimmed,the exhaust valves were blowing as they had not been seated properly so had them done too.

The piston was well within tolerances to the bore so just had new rings put in but they will be needed to be bedded in.

I will wait till the swinging arm bearing comes and will re assemble it all ready for a 30 km ride where I will bed it in,I,m going for the hard ride idea and will not mollycoddle the engine too much as I beleive a good hard ride will give a good gas seal around the rings....maybe I ,m wrong but I beleive modern day engines are different from 20 years ago and I think it will handle it ok....I,m running mineral oil which I will change after about 400 kms to semi synthetic.

I ll let you know how it goes....
Reply With Quote
  #12  
Old 12 May 2010
Registered Users
HUBB regular
  
Join Date: Apr 2008
Location: Alesund, Norway
Posts: 53
Interesting... ill follow this.. Im going to run it in hard when I change my piston too.
I remember when we were 16 and drove 50cc. Mine was dead lazy. The neighbourhood bully bought a brand new TS-X, fired it up and just drove like crazy. His moped went waaaay better than ours, with no other mods done.
I give that to the hard break-in..

Good luck :-)
Reply With Quote
  #13  
Old 12 May 2010
Registered Users
Veteran HUBBer
  
Join Date: Nov 2009
Location: christchurch newzealand
Posts: 384
Cheers mate ,I ll let you know how it goes....
Reply With Quote
Reply

« Previous Thread | Next Thread »

Currently Active Users Viewing This Thread: 1 (0 Registered Users and/or Members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
light my fire (fire stick) stuxtttr Camping Equipment and all Clothing 6 9 Jan 2008 22:23
A small fire extingusiher!? Margus Equipping the Bike - what's the best gear? 10 7 Sep 2006 18:10
Fire in Mali ted Travellers' Advisories, Safety and Security on the Road 0 29 Apr 2001 04:00
Fire in Mali ted Staying Healthy on the Road 0 29 Apr 2001 04:00

 
 

Announcements

Thinking about traveling? Not sure about the whole thing? Watch the HU Achievable Dream Video Trailers and then get ALL the information you need to get inspired and learn how to travel anywhere in the world!

Have YOU ever wondered who has ridden around the world? We did too - and now here's the list of Circumnavigators!
Check it out now, and add your information if we didn't find you.

Next HU Eventscalendar

HU Event and other updates on the HUBB Forum "Traveller's Advisories" thread.
ALL Dates subject to change.

2024:

Add yourself to the Updates List for each event!

Questions about an event? Ask here

HUBBUK: info

See all event details

 
World's most listened to Adventure Motorbike Show!
Check the RAW segments; Grant, your HU host is on every month!
Episodes below to listen to while you, err, pretend to do something or other...

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

"Ultimate global guide for red-blooded bikers planning overseas exploration. Covers choice & preparation of best bike, shipping overseas, baggage design, riding techniques, travel health, visas, documentation, safety and useful addresses." Recommended. (Grant)



Ripcord Rescue Travel Insurance.

Ripcord Rescue Travel Insurance™ combines into a single integrated program the best evacuation and rescue with the premier travel insurance coverages designed for adventurers.

Led by special operations veterans, Stanford Medicine affiliated physicians, paramedics and other travel experts, Ripcord is perfect for adventure seekers, climbers, skiers, sports enthusiasts, hunters, international travelers, humanitarian efforts, expeditions and more.

Ripcord travel protection is now available for ALL nationalities, and travel is covered on motorcycles of all sizes!


 

What others say about HU...

"This site is the BIBLE for international bike travelers." Greg, Australia

"Thank you! The web site, The travels, The insight, The inspiration, Everything, just thanks." Colin, UK

"My friend and I are planning a trip from Singapore to England... We found (the HU) site invaluable as an aid to planning and have based a lot of our purchases (bikes, riding gear, etc.) on what we have learned from this site." Phil, Australia

"I for one always had an adventurous spirit, but you and Susan lit the fire for my trip and I'll be forever grateful for what you two do to inspire others to just do it." Brent, USA

"Your website is a mecca of valuable information and the (video) series is informative, entertaining, and inspiring!" Jennifer, Canada

"Your worldwide organisation and events are the Go To places to for all serious touring and aspiring touring bikers." Trevor, South Africa

"This is the answer to all my questions." Haydn, Australia

"Keep going the excellent work you are doing for Horizons Unlimited - I love it!" Thomas, Germany

Lots more comments here!



Five books by Graham Field!

Diaries of a compulsive traveller
by Graham Field
Book, eBook, Audiobook

"A compelling, honest, inspiring and entertaining writing style with a built-in feel-good factor" Get them NOW from the authors' website and Amazon.com, Amazon.ca, Amazon.co.uk.



Back Road Map Books and Backroad GPS Maps for all of Canada - a must have!

Your ad could be here, on EVERY page of the HUBB, or the whole website, or as many as you like!

New to Horizons Unlimited?

New to motorcycle travelling? New to the HU site? Confused? Too many options? It's really very simple - just 4 easy steps!

Horizons Unlimited was founded in 1997 by Grant and Susan Johnson following their journey around the world on a BMW R80G/S.

Susan and Grant Johnson Read more about Grant & Susan's story

Membership - help keep us going!

Horizons Unlimited is not a big multi-national company, just two people who love motorcycle travel and have grown what started as a hobby in 1997 into a full time job (usually 8-10 hours per day and 7 days a week) and a labour of love. To keep it going and a roof over our heads, we run events all over the world with the help of volunteers; we sell inspirational and informative DVDs; we have a few selected advertisers; and we make a small amount from memberships.

You don't have to be a Member to come to an HU meeting, access the website, or ask questions on the HUBB. What you get for your membership contribution is our sincere gratitude, good karma and knowing that you're helping to keep the motorcycle travel dream alive. Contributing Members and Gold Members do get additional features on the HUBB. Here's a list of all the Member benefits on the HUBB.



All times are GMT +1. The time now is 10:40.

Contact Us - Horizons Unlimited Motorcycle Travellers Website - Archive - Privacy Statement - Top