Go Back   Horizons Unlimited - The HUBB > Technical, Bike forums > Yamaha Tech
Engine noise Engine noise
Register FAQ Calendar Search Today's Posts Mark Forums Read
Yamaha Tech Originally the Yamaha XT600 Tech Forum, due to demand it now includes all Yamaha's technical / mechanical / repair / preparation questions.
Photo by Ellen Delis, Lagunas Ojos del Campo, Antofalla, Catamarca

I haven't been everywhere...
but it's on my list!


Photo by Ellen Delis,
Lagunas Ojos del Campo,
Antofalla, Catamarca



Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 1 Jul 2008
Registered Users
HUBB regular
  
Join Date: Jun 2008
Location: Pietermaritzburg
Posts: 63
Engine noise
Hi guys, long time lurker but 1st time poster.
My 3TB engine (in an SRX400 frame) has a knocking sound from what sounds like the bottom end. Replacing the camchain and putting the chain guide the right way round after setting the tappets dulled it but its still there. Its primarily noticable at idle, cant hear anything after that coz the pipe a 'bit' noisy. Any obvious things to check? The camshaft looks mint so not likely to be from previous oil starvation, I hope?

As an aside how the hell are you supposed to get the covers off the engine, I mean the ones to turn the crankshaft and see the timing marks? Had to get someone else to do it! any tips?

Thanks!
Reply With Quote
  #2  
Old 3 Jul 2008
Registered Users
HUBB regular
  
Join Date: Jun 2008
Location: Pietermaritzburg
Posts: 63
Probably not my most descriptive paragraph...
The noise occurs equally hot or cold and is only noticable at idle.
Pulling the clutch lever has no effect.
Reply With Quote
  #3  
Old 3 Jul 2008
Registered Users
New on the HUBB
  
Join Date: Jun 2008
Location: Grenoble
Posts: 3
noise
Hi ,try this link :http://www.horizonsunlimited.com/hub...ine-gone-6422; "loose nut on the crank shaft ";
It might not be that, but after my scary but in the end lucky experience, bolt on the crankshaft (the one holding the two pinions together) or the one on the balancing shaft would be the first thing i would check if i was ever to hear that banging noise coming from the botom of my 3AJ again.

Regards;
Reply With Quote
  #4  
Old 8 Jul 2008
Registered Users
HUBB regular
  
Join Date: Jun 2008
Location: Pietermaritzburg
Posts: 63
Very interesting! SO how would I go about tightening this nut? How far do I need to dismantle the engine? Im not particularly experienced but willing to learn!

Anyone with a guide how exctly to go about doing this?
Reply With Quote
  #5  
Old 9 Jul 2008
Registered Users
Veteran HUBBer
  
Join Date: Oct 2007
Location: London
Posts: 298
From the Xperts
Hello BANANA BOY!

With regards to the bolts on the crank case - you can find the settings and sequence of tightening them in the service manual. (if you don't have one - i can send you the bits from our manual, just pm me.)


For some light entertainment, whilst you solve your problem, I can show you, very graphically and visually how NOT to do it... How to Kill Your Engine...
__________________
Reply With Quote
  #6  
Old 9 Jul 2008
bikerz's Avatar
Contributing Member
HUBB regular
  
Join Date: Aug 2006
Location: portugal
Posts: 75
dear god who told you to use a lever to tighten a 6mm bolt....you two certainly do need some mechanical tutoring!
Reply With Quote
  #7  
Old 9 Jul 2008
robinh44's Avatar
Registered Users
HUBB regular
  
Join Date: Mar 2007
Location: North Herts, UK
Posts: 20
Hi,

I find it is worth having two types of torque wrench, a 1/2" drive which will handle larger sockets and torques with a range of 50nm-200nm and a smaller torque wrench with a 3/8" drive for smaller sockets and a range of 10nm-80nm. After a while you get the feel for hand tightening bolts but on things like flywheels always stick to exact torque specs, as I found to my cost on my Morini and had a flywheel come off causing the following damage to my casing and a 2 mile walk home. Experience don't you love it , you get the test then shortly followed by the lesson.

The hole made but the flywheel nut coming off


However quickly fixed by taping some card on the outside and using some jb weld, very good casing repair. Still holding out after over a year of service






Regards

Robin
Reply With Quote
  #8  
Old 6 Sep 2009
Registered Users
HUBB regular
  
Join Date: Jun 2008
Location: Pietermaritzburg
Posts: 63
A long overdue update...
Quite a few months ago I got my mechanic to have a look at the crank/balancer nuts and they were stil factory and on spec so thats nt the problem.
Yesterday I found a missing bolt which holds the header to a short connector box, cant believe I missed it! Havnt started the bike yet but im hoping thats the cause of the tapping.
Reply With Quote
Reply

« Previous Thread | Next Thread »

Currently Active Users Viewing This Thread: 1 (0 Registered Users and/or Members and 1 guests)
 
Thread Tools
Display Modes
Linear Mode Linear Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Engine noise :-( spakur KTM Tech 4 18 Jun 2008 19:17
Engine noise 640 Adv??? orrin KTM Tech 2 26 May 2008 19:51
XT600E - Funny Engine Noise? Micah Yamaha Tech 1 31 Oct 2007 11:56
07 gsa noise,trans?engine? wrightstuff BMW Tech 2 20 Aug 2007 14:48
'80 R100 engine noise Lilli Walker BMW Tech 2 28 Feb 2004 00:37

 
 

Announcements

Thinking about traveling? Not sure about the whole thing? Watch the HU Achievable Dream Video Trailers and then get ALL the information you need to get inspired and learn how to travel anywhere in the world!

Have YOU ever wondered who has ridden around the world? We did too - and now here's the list of Circumnavigators!
Check it out now, and add your information if we didn't find you.

Next HU Eventscalendar

HU Event and other updates on the HUBB Forum "Traveller's Advisories" thread.
ALL Dates subject to change.

2024:

Add yourself to the Updates List for each event!

Questions about an event? Ask here

HUBBUK: info

See all event details

 
World's most listened to Adventure Motorbike Show!
Check the RAW segments; Grant, your HU host is on every month!
Episodes below to listen to while you, err, pretend to do something or other...

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

"Ultimate global guide for red-blooded bikers planning overseas exploration. Covers choice & preparation of best bike, shipping overseas, baggage design, riding techniques, travel health, visas, documentation, safety and useful addresses." Recommended. (Grant)



Ripcord Rescue Travel Insurance.

Ripcord Rescue Travel Insurance™ combines into a single integrated program the best evacuation and rescue with the premier travel insurance coverages designed for adventurers.

Led by special operations veterans, Stanford Medicine affiliated physicians, paramedics and other travel experts, Ripcord is perfect for adventure seekers, climbers, skiers, sports enthusiasts, hunters, international travelers, humanitarian efforts, expeditions and more.

Ripcord travel protection is now available for ALL nationalities, and travel is covered on motorcycles of all sizes!


 

What others say about HU...

"This site is the BIBLE for international bike travelers." Greg, Australia

"Thank you! The web site, The travels, The insight, The inspiration, Everything, just thanks." Colin, UK

"My friend and I are planning a trip from Singapore to England... We found (the HU) site invaluable as an aid to planning and have based a lot of our purchases (bikes, riding gear, etc.) on what we have learned from this site." Phil, Australia

"I for one always had an adventurous spirit, but you and Susan lit the fire for my trip and I'll be forever grateful for what you two do to inspire others to just do it." Brent, USA

"Your website is a mecca of valuable information and the (video) series is informative, entertaining, and inspiring!" Jennifer, Canada

"Your worldwide organisation and events are the Go To places to for all serious touring and aspiring touring bikers." Trevor, South Africa

"This is the answer to all my questions." Haydn, Australia

"Keep going the excellent work you are doing for Horizons Unlimited - I love it!" Thomas, Germany

Lots more comments here!



Five books by Graham Field!

Diaries of a compulsive traveller
by Graham Field
Book, eBook, Audiobook

"A compelling, honest, inspiring and entertaining writing style with a built-in feel-good factor" Get them NOW from the authors' website and Amazon.com, Amazon.ca, Amazon.co.uk.



Back Road Map Books and Backroad GPS Maps for all of Canada - a must have!

Your ad could be here, on EVERY page of the HUBB, or the whole website, or as many as you like!

New to Horizons Unlimited?

New to motorcycle travelling? New to the HU site? Confused? Too many options? It's really very simple - just 4 easy steps!

Horizons Unlimited was founded in 1997 by Grant and Susan Johnson following their journey around the world on a BMW R80G/S.

Susan and Grant Johnson Read more about Grant & Susan's story

Membership - help keep us going!

Horizons Unlimited is not a big multi-national company, just two people who love motorcycle travel and have grown what started as a hobby in 1997 into a full time job (usually 8-10 hours per day and 7 days a week) and a labour of love. To keep it going and a roof over our heads, we run events all over the world with the help of volunteers; we sell inspirational and informative DVDs; we have a few selected advertisers; and we make a small amount from memberships.

You don't have to be a Member to come to an HU meeting, access the website, or ask questions on the HUBB. What you get for your membership contribution is our sincere gratitude, good karma and knowing that you're helping to keep the motorcycle travel dream alive. Contributing Members and Gold Members do get additional features on the HUBB. Here's a list of all the Member benefits on the HUBB.



All times are GMT +1. The time now is 20:52.

Contact Us - Horizons Unlimited Motorcycle Travellers Website - Archive - Privacy Statement - Top