Go Back   Horizons Unlimited - The HUBB > Technical, Bike forums > Yamaha Tech
Yamaha Tech Originally the Yamaha XT600 Tech Forum, due to demand it now includes all Yamaha's technical / mechanical / repair / preparation questions.
Photo by Daniel Rintz, Himba children, Namibia

The only impossible journey
is the one
you never begin

Photo by Daniel Rintz,
Himba children, Namibia



Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 14 Mar 2008
Registered Users
Veteran HUBBer
 
Join Date: Feb 2002
Posts: 212
Is it worth repairing (Again) ?

Hi all,

I have a 1991 XT600E that had its engine professionally rebuilt about 6 months ago, at about 85 000 miles (140 000Km). The work included replacing all the crankshaft bearings, new con rod, re-bore etc. This cured the oil consumption and loss of power but not the excessive amount of vibration that had developed during the last few thousand miles before the rebuild. Unfortunately, that mechanic has now emigrated.

Initially I thought that this would improve when the engine had done some miles but 4000 miles later, no improvement. Then I thought tight spots in the final drive chain were the cause, but replacing this didn’t help either

A friend and local mechanic has had a look and discovered that there is some play at the end of the crankshaft, visible when the circular cover is removed from the left side engine case and a screwdriver levered against the nut on the end of the crank. He is reluctant to investigate further as he believes that at 90 odd thousand miles the crank cases will have suffered a lot of strain where the main bearings locate.

Is he right?

I don’t know yet if the (new) bearing is at fault or if where it locates in the crankcase is damaged. If the case is damaged, is it practical to repair?

Is it worth spending even more money on?

Thanks in advance for your thoughts

Mark
Reply With Quote
  #2  
Old 14 Mar 2008
Registered Users
HUBB regular
 
Join Date: Jan 2007
Location: Bournemouth
Posts: 89
A few mates who have had jap motors fail have gone for the second hand engine approach this is a bit of a risk but most of the dealers will give you a warranty and it means you have lots of spare bits for your engine and it sometimes works out cheaper than an engine rebuild
Reply With Quote
  #3  
Old 14 Mar 2008
Registered Users
Veteran HUBBer
 
Join Date: Jun 2007
Location: Ripley, Derbyshire
Posts: 373
Depends on if your the kind of guy that would put a old loyal family dog down instead of caring for it in it's old age.

If your attached to the ride then fix it, if not take it off roading set it alight and claim on the insurance, oh I had an accident on the bike it went down and caught alight, pay me now!

Legal disclaimer I in no way condone this kind of activity as it would not be legal.
Reply With Quote
  #4  
Old 15 Mar 2008
Registered Users
Veteran HUBBer
 
Join Date: Jan 2001
Location: Stockholm
Posts: 651
Play

The crankshaft bearings on the XT/TT models have seemingly a lot of play when cold. For info, the designation is C3. This has been designed like that because they get hot ... hot, the play when cold serves a purpose. Therefore, checking this with a cold engine does not tell you much.
If there really is play between the bearing outer race and its seat, I'd guess you would already have had a big bang ....

I would rather check tightness of all the bolts holding the engine to the frame, it is not for nothing that Yamaha prescribes high torque values for these.
Check this first:
- The 3 bolts on top of the cilinder head: 58 Nm / 43 ft - lb
- The 4 bolts connection the lower end with the front frame downpipe: 58 Nm / 43 ft - lb
- The swingarm shaft / bolt: 100 Nm / 73 ft lb
- The 'hidden' bolt below the swingarm shaft, something like 80 Nm

Tighten up and see how that helps. If not, post again.

And, remember, it is a large single .... not the best design to imitate turbine like running behaviour. Ever compared with another one?

Auke
__________________
Auke
http://aukemarieke.blogspot.com
Reply With Quote
  #5  
Old 20 Mar 2008
Registered Users
Veteran HUBBer
 
Join Date: Feb 2002
Posts: 212
Thanks for your replies

All

Thanks for your replies.

I have checked that all the engine mounting bolts are good and tight, though not with a torque wrench.

I am familiar with how much these bikes vibrate, I have a 3AJ Tenere to compair it to, and I can remember that when we first got the 600E I was supprised by how little it vibrated (compared to my old XS650 and Z650). It is very different now!

I will compare movement on the rotor end of the crank between the two XT600s, with engines cold and hot, by removing the circular plastic cover andusing a screwdriver underneith the nut to lever it up (without using much force).

However, I was hopeing to get opinions on whether the crankcases are likley to be so stressed by 95 000 miles of use as to make it foolish to rebuild the engine with the intention of using it for another big trip.

Also, if the crank case location for the main bearing is worn, causing the observed free play, is it practicle to repair it?

Thanks

Mark
Reply With Quote
  #6  
Old 20 Mar 2008
Registered Users
New on the HUBB
 
Join Date: Aug 2007
Location: Washington State
Posts: 13
are you sure that when they rebuilt the crank they put it back together within 1.5 thousandths? That's typically what I shoot for when rebuilding a crank. It may be that the shop assembled the crank improperly. I'd put my bets on the crank being out of round myself rather than the cases.
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 Registered Users and/or Members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Gaerne SG10 boots - worth the $? Nomadic1 Equipment Reviews 5 21 Jul 2009 03:37
Center stand for 3aj, is it worth it? pgouvias Yamaha Tech 5 21 May 2007 19:44
Germany - Italy in Feb... is it worth it? jpdemelo Route Planning 5 27 Jan 2007 19:12
Libretta - how much, and is it worth it? MattB SOUTH AMERICA 3 24 Feb 2005 16:38
Landrover Def 90, 2.3 Diesel, 1982, what's it worth? fireboomer Equipping the Overland Vehicle 4 12 Apr 2003 00:33

 
 

Announcements

Thinking about traveling? Not sure about the whole thing? Watch the HU Achievable Dream Video Trailers and then get ALL the information you need to get inspired and learn how to travel anywhere in the world!

Have YOU ever wondered who has ridden around the world? We did too - and now here's the list of Circumnavigators!
Check it out now
, and add your information if we didn't find you.

Next HU Eventscalendar

HU Event and other updates on the HUBB Forum "Traveller's Advisories" thread.
ALL Dates subject to change.

2024:

Add yourself to the Updates List for each event!

Questions about an event? Ask here

HUBBUK: info

See all event details

 
World's most listened to Adventure Motorbike Show!
Check the RAW segments; Grant, your HU host is on every month!
Episodes below to listen to while you, err, pretend to do something or other...

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

"Ultimate global guide for red-blooded bikers planning overseas exploration. Covers choice & preparation of best bike, shipping overseas, baggage design, riding techniques, travel health, visas, documentation, safety and useful addresses." Recommended. (Grant)



Ripcord Rescue Travel Insurance.

Ripcord Rescue Travel Insurance™ combines into a single integrated program the best evacuation and rescue with the premier travel insurance coverages designed for adventurers.

Led by special operations veterans, Stanford Medicine affiliated physicians, paramedics and other travel experts, Ripcord is perfect for adventure seekers, climbers, skiers, sports enthusiasts, hunters, international travelers, humanitarian efforts, expeditions and more.

Ripcord travel protection is now available for ALL nationalities, and travel is covered on motorcycles of all sizes!


 

What others say about HU...

"This site is the BIBLE for international bike travelers." Greg, Australia

"Thank you! The web site, The travels, The insight, The inspiration, Everything, just thanks." Colin, UK

"My friend and I are planning a trip from Singapore to England... We found (the HU) site invaluable as an aid to planning and have based a lot of our purchases (bikes, riding gear, etc.) on what we have learned from this site." Phil, Australia

"I for one always had an adventurous spirit, but you and Susan lit the fire for my trip and I'll be forever grateful for what you two do to inspire others to just do it." Brent, USA

"Your website is a mecca of valuable information and the (video) series is informative, entertaining, and inspiring!" Jennifer, Canada

"Your worldwide organisation and events are the Go To places to for all serious touring and aspiring touring bikers." Trevor, South Africa

"This is the answer to all my questions." Haydn, Australia

"Keep going the excellent work you are doing for Horizons Unlimited - I love it!" Thomas, Germany

Lots more comments here!



Five books by Graham Field!

Diaries of a compulsive traveller
by Graham Field
Book, eBook, Audiobook

"A compelling, honest, inspiring and entertaining writing style with a built-in feel-good factor" Get them NOW from the authors' website and Amazon.com, Amazon.ca, Amazon.co.uk.



Back Road Map Books and Backroad GPS Maps for all of Canada - a must have!

New to Horizons Unlimited?

New to motorcycle travelling? New to the HU site? Confused? Too many options? It's really very simple - just 4 easy steps!

Horizons Unlimited was founded in 1997 by Grant and Susan Johnson following their journey around the world on a BMW R80G/S.

Susan and Grant Johnson Read more about Grant & Susan's story

Membership - help keep us going!

Horizons Unlimited is not a big multi-national company, just two people who love motorcycle travel and have grown what started as a hobby in 1997 into a full time job (usually 8-10 hours per day and 7 days a week) and a labour of love. To keep it going and a roof over our heads, we run events all over the world with the help of volunteers; we sell inspirational and informative DVDs; we have a few selected advertisers; and we make a small amount from memberships.

You don't have to be a Member to come to an HU meeting, access the website, or ask questions on the HUBB. What you get for your membership contribution is our sincere gratitude, good karma and knowing that you're helping to keep the motorcycle travel dream alive. Contributing Members and Gold Members do get additional features on the HUBB. Here's a list of all the Member benefits on the HUBB.




All times are GMT +1. The time now is 11:27.