Horizons Unlimited - The HUBB

Horizons Unlimited - The HUBB (https://www.horizonsunlimited.com/hubb/)
-   Yamaha Tech (https://www.horizonsunlimited.com/hubb/yamaha-tech/)
-   -   Considering 1987 XT600 (https://www.horizonsunlimited.com/hubb/yamaha-tech/considering-1987-xt600-57765)

jghall 17 Jun 2011 20:54
Considering 1987 XT600
 
Hello all... I am considering buying a 1987 XT600 project bike... It is complete, and it runs, but stalls out when its put into gear... I am assuming this to be a clutch issue... What else should I look for, or should I run all together ;-)??? Thanks for any help...

Jens Eskildsen 17 Jun 2011 21:02
Could be smething as simple as the sidestandswitch. It gets a lot of dirt and water.

jghall 17 Jun 2011 22:02
Quote:
Originally Posted by Jens Eskildsen (Post 339544)
Could be smething as simple as the sidestandswitch. It gets a lot of dirt and water.
Thats what im hoping for...

G30ff 18 Jun 2011 19:28
If the engine just stops, its probably the sidestand switch, however if the bike is stalling when it goes into gear the clutch plates will be stuck together... quite a commaon thing if the bike's been stood for a while...

Mezo 19 Jun 2011 08:37
Quote:
Originally Posted by G30ff (Post 339630)
If the engine just stops, its probably the sidestand switch, however if the bike is stalling when it goes into gear the clutch plates will be stuck together... quite a commaon thing if the bike's been stood for a while...
Mine were stuck together after sitting for 12 months, i just fired it up in gear with the clutch held in & one finger on the front brake, reved it up & let the clutch out & it free`d up fine. :thumbup1:

Mezo.


All times are GMT +1. The time now is 18:53.


vB.Sponsors