Go Back   Horizons Unlimited - The HUBB > Technical, Bike forums > Yamaha Tech
Yamaha Tech Originally the Yamaha XT600 Tech Forum, due to demand it now includes all Yamaha's technical / mechanical / repair / preparation questions.
Photo by Ellen Delis, Lagunas Ojos del Campo, Antofalla, Catamarca

I haven't been everywhere...
but it's on my list!


Photo by Ellen Delis,
Lagunas Ojos del Campo,
Antofalla, Catamarca



Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 24 Feb 2007
Registered Users
New on the HUBB
 
Join Date: Feb 2007
Location: Greece
Posts: 17
Carb problem?

Hello,
I am the happy owner of a 94 Xt600 with 03 motor carbs etc.It is a complete modification with k&n filter crd exchaust otherwise stock.(12000km)
Here is my problem.
The bike runs fine exept on high rpm and close to full throttle opening it accelerates well but when i close the throttle a bit to ajust my speed it stalls and i have to open the throttle completely for the motor to come to life again.
the problem appears at any gear and it is a bit strange because i have
to ride using the throttle like an on-off switch especially at high speeds.
I have tryed to eliminate all the apparent simple causes like loose wires
dirty air filter etc.
Any ideas please reply thanks.
ps. I forgot to mention its a bitch to start in the morning.

Last edited by Valaar; 24 Feb 2007 at 23:58.
Reply With Quote
  #2  
Old 25 Feb 2007
Registered Users
Veteran HUBBer
 
Join Date: Jan 2001
Location: Stockholm
Posts: 651
Talking At last

a new problem ...
I can't really develop a theory about what happens, but it might be that you have opened up everything with the K&N and CRd exhaust and that the carb setting high up is too lean. Too check, raise the needle in the secondary carb one or two notches. While you're there, check the membrane, slide and butterfly valve, mechanism.

Bad starting: adjust the pilot mixture screw till solved. Yes, a bitch to reach ....

Auke
__________________
Auke
http://aukemarieke.blogspot.com
Reply With Quote
  #3  
Old 26 Feb 2007
Registered Users
New on the HUBB
 
Join Date: Feb 2007
Posts: 4
buying Carburettor Inlet Rubbers in the UK

I have an XT600E 1993 (Italian import) and I have a damaged Carburettor Inlet Rubber. Does anybody know where I can buy these spare parts from in the UK? The 2 Yamamha part numbers for these 2 Carburettor Inlet Rubbers are 43f-13586-01-00 and 1vj-13596-00-00.
I hope someone in the UK can help me
Reply With Quote
  #4  
Old 26 Feb 2007
Contributing Member
Veteran HUBBer
 
Join Date: Mar 2003
Location: London,England
Posts: 358
Quote:
Originally Posted by jamie.buchanan View Post
I have an XT600E 1993 (Italian import) and I have a damaged Carburettor Inlet Rubber. Does anybody know where I can buy these spare parts from in the UK? The 2 Yamamha part numbers for these 2 Carburettor Inlet Rubbers are 43f-13586-01-00 and 1vj-13596-00-00.
I hope someone in the UK can help me

Hi I think Fowlers are the UKs main Yamaha spares supplier.

Fowlers - Genuine Spare Parts
Reply With Quote
  #5  
Old 27 Feb 2007
Registered Users
New on the HUBB
 
Join Date: Feb 2007
Location: Greece
Posts: 17
Thanks for the reply.
Im going to try raising the needle next weekend and post reply.
I also have some questions regarding technical info about this bike
to ask in a new thread.
Reply With Quote
  #6  
Old 27 Feb 2007
bikerz's Avatar
Contributing Member
HUBB regular
 
Join Date: Aug 2006
Location: portugal
Posts: 75
Quote:
Originally Posted by Valaar View Post
Hello,
I am the happy owner of a 94 Xt600 with 03 motor carbs etc.It is a complete modification with k&n filter crd exchaust otherwise stock.(12000km)
Here is my problem.
The bike runs fine exept on high rpm and close to full throttle opening it accelerates well but when i close the throttle a bit to ajust my speed it stalls and i have to open the throttle completely for the motor to come to life again.
the problem appears at any gear and it is a bit strange because i have
to ride using the throttle like an on-off switch especially at high speeds.
I have tryed to eliminate all the apparent simple causes like loose wires
dirty air filter etc.
Any ideas please reply thanks.
ps. I forgot to mention its a bitch to start in the morning.

did you increase the main jet size?
Reply With Quote
  #7  
Old 3 Mar 2007
Registered Users
New on the HUBB
 
Join Date: Feb 2007
Location: Greece
Posts: 17
Thanks for replying.
I opened the carbs today and here is what happened
I noticed that the 2 colars connecting the airbox to the carbs were gone. I used a couple of tie raps temporarly,raised the 2nd needle 1 slot,cleaned the air filter and the bike runs much better now!
It runs and sounds better,pulls harder and that got me thinking maybe
It was running way lean all this time.
A part of the stumble is still there but at a smaller rpm range.
Id also like to ask if i should change the main jets and what size to use.
I also noticed the carbs are like new inside and the sync is fine at ~6mm
but at w.o.t. the butterfly was open way more than 90 degres.
Im no carb expert but i know for fact that cant be a good thing for airflow.
So i was wondering what would happen if i align the plate to be verticall at
wot but i left it as is because like i said i dont know lots about carbs.
The mixure screw i found but couldnt reach it.next time.
Reply With Quote
  #8  
Old 4 Mar 2007
Registered Users
Veteran HUBBer
 
Join Date: Jan 2001
Location: Stockholm
Posts: 651
Too lean

seems to have been the problem. Shorty of measuring the mixture (exhaust gas analyser or lambda sonde) you can experiment a bit: raise the needle in the second carb one notch extra, or raise the needle in the first carb one notch.
Also, make sure petrol flows freely to the float bowl.
Do not worry too much about the buterfly, you will not very often use that throttle setting. If you insist on worrying; the butterfky should be horizontal when first stage slide just not covers any of the channel area, after that point there is another 5 mm of travel that is irrelevant.

Auke
__________________
Auke
http://aukemarieke.blogspot.com
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 Registered Users and/or Members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Xt225 Serrow Carb Prob Oz Yamaha Tech 3 14 Dec 2006 03:33
carb problem fencer Yamaha Tech 3 2 Aug 2006 18:49
1150 GSA problem Thermal BMW Tech 10 29 Jul 2006 20:15
Carb problem bolla Yamaha Tech 1 10 Mar 2005 00:49
carb sync troubles... jim Yamaha Tech 6 22 Jun 2004 21:54

 
 

Announcements

Thinking about traveling? Not sure about the whole thing? Watch the HU Achievable Dream Video Trailers and then get ALL the information you need to get inspired and learn how to travel anywhere in the world!

Have YOU ever wondered who has ridden around the world? We did too - and now here's the list of Circumnavigators!
Check it out now
, and add your information if we didn't find you.

Next HU Eventscalendar

HU Event and other updates on the HUBB Forum "Traveller's Advisories" thread.
ALL Dates subject to change.

2024:

Add yourself to the Updates List for each event!

Questions about an event? Ask here

HUBBUK: info

See all event details

 
World's most listened to Adventure Motorbike Show!
Check the RAW segments; Grant, your HU host is on every month!
Episodes below to listen to while you, err, pretend to do something or other...

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

"Ultimate global guide for red-blooded bikers planning overseas exploration. Covers choice & preparation of best bike, shipping overseas, baggage design, riding techniques, travel health, visas, documentation, safety and useful addresses." Recommended. (Grant)



Ripcord Rescue Travel Insurance.

Ripcord Rescue Travel Insurance™ combines into a single integrated program the best evacuation and rescue with the premier travel insurance coverages designed for adventurers.

Led by special operations veterans, Stanford Medicine affiliated physicians, paramedics and other travel experts, Ripcord is perfect for adventure seekers, climbers, skiers, sports enthusiasts, hunters, international travelers, humanitarian efforts, expeditions and more.

Ripcord travel protection is now available for ALL nationalities, and travel is covered on motorcycles of all sizes!


 

What others say about HU...

"This site is the BIBLE for international bike travelers." Greg, Australia

"Thank you! The web site, The travels, The insight, The inspiration, Everything, just thanks." Colin, UK

"My friend and I are planning a trip from Singapore to England... We found (the HU) site invaluable as an aid to planning and have based a lot of our purchases (bikes, riding gear, etc.) on what we have learned from this site." Phil, Australia

"I for one always had an adventurous spirit, but you and Susan lit the fire for my trip and I'll be forever grateful for what you two do to inspire others to just do it." Brent, USA

"Your website is a mecca of valuable information and the (video) series is informative, entertaining, and inspiring!" Jennifer, Canada

"Your worldwide organisation and events are the Go To places to for all serious touring and aspiring touring bikers." Trevor, South Africa

"This is the answer to all my questions." Haydn, Australia

"Keep going the excellent work you are doing for Horizons Unlimited - I love it!" Thomas, Germany

Lots more comments here!



Five books by Graham Field!

Diaries of a compulsive traveller
by Graham Field
Book, eBook, Audiobook

"A compelling, honest, inspiring and entertaining writing style with a built-in feel-good factor" Get them NOW from the authors' website and Amazon.com, Amazon.ca, Amazon.co.uk.



Back Road Map Books and Backroad GPS Maps for all of Canada - a must have!

New to Horizons Unlimited?

New to motorcycle travelling? New to the HU site? Confused? Too many options? It's really very simple - just 4 easy steps!

Horizons Unlimited was founded in 1997 by Grant and Susan Johnson following their journey around the world on a BMW R80G/S.

Susan and Grant Johnson Read more about Grant & Susan's story

Membership - help keep us going!

Horizons Unlimited is not a big multi-national company, just two people who love motorcycle travel and have grown what started as a hobby in 1997 into a full time job (usually 8-10 hours per day and 7 days a week) and a labour of love. To keep it going and a roof over our heads, we run events all over the world with the help of volunteers; we sell inspirational and informative DVDs; we have a few selected advertisers; and we make a small amount from memberships.

You don't have to be a Member to come to an HU meeting, access the website, or ask questions on the HUBB. What you get for your membership contribution is our sincere gratitude, good karma and knowing that you're helping to keep the motorcycle travel dream alive. Contributing Members and Gold Members do get additional features on the HUBB. Here's a list of all the Member benefits on the HUBB.




All times are GMT +1. The time now is 01:21.